Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2019 | Journal Article | LibreCat-ID: 30716
Kraus, M., P. Frey, T. Kleffel, D. Drummer, and M. Merklein. “Mechanical Joining without Auxiliary Element by Cold Formed Pins for Multi-Material-Systems.” AIP Conference Proceedings 2113 (2019): 050006. https://doi.org/10.1063/1.5112570.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20678
Bielak, Christian Roman, Max Böhnke, Robert Beck, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .” Journal of Advanced Joining Processes. , 2020. https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30706
Steinfelder, C., and A. Brosius. “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis.” Lecture Notes in Production Engineering, 2020, 134–41. https://doi.org/10.1007/978-3-662-62138-7_14.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30704
Böhm, H., H. Zhang, B. Gröger, A. Hornig, and M. Gude. “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading.” Journal of Composites Science 4 (2020): 188. https://doi.org/10.3390/jcs4040188.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30707
Sadeghian, B., C. Guilleaume, R. Lafarge, and A. Brosius. “Investigation of Clinched Joints – A Finite Element Simulation of a Non-Destructive Approach.” Lecture Notes in Production Engineering, 2020, 116–24. https://doi.org/10.1007/978-3-662-62138-7_12.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30711
Ewenz, L., S. Schettler, A. T. Zeuner, and M. Zimmermann. “Untersuchungen Zum Einfluss von Geometrieparametern Bei Artgleichen Al-Clinchverbindungen Auf Das Ermüdungsverhalten Im Bereich Hoher Bis Sehr Hoher Lastspielzahlen.” Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit, 2020. https://doi.org/10.48447/WP-2020-039.
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24575
Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2020, 1039–44. Cham, 2020. https://doi.org/10.1007/978-3-030-36408-3_141.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30712
Köhler, D., B. Gröger, R. Kupfer, A. Hornig, and M. Gude. “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process.” Procedia Manufacturing 47 (2020): 940–47. https://doi.org/10.1016/j.promfg.2020.04.288.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30710
Zirngibl, C., B. Schleich, and S. Wartzack. “Potentiale Datengestützter Methoden Zur Gestaltung Und Optimierung Mechanischer Fügeverbindungen.” Proceedings of the 31st Symposium Design for X (DFX2020), 2020. https://doi.org/10.35199/dfx2020.8.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30709
Köhler, D., R. Kupfer, and M. Gude. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.” Journal of Advanced Joining Processes 2 (2020): 100034. https://doi.org/10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30703
Kraus, M., and M. Merklein. “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures.” Journal of Materials Processing Technology 283 (2020): 116697. https://doi.org/10.1016/j.jmatprotec.2020.116697.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 20344 | 
Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Development of a numerical method for analyzing the robustness of clinching in versatile process chains.” Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 30721
Wituschek, S., C. M. Kuball, M. Merklein, and M. Lechner. “Test Method for Friction Characterization of Rivets.” Defect and Diffusion Forum 404 (2020): 132–37. https://doi.org/10.4028/www.scientific.net/ddf.404.132.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 23980
Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Development of a Special Specimen Geometry for the Experimental Determination of Fracture Mechanical Parameters of Clinchable Metal Sheets.” Procedia Structural Integrity . Elsevier, 2020. https://doi.org/10.1016/j.prostr.2020.11.081.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 23982
Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Experimental and Numerical Preliminary Investigations of the Base Material and Preformed Components Regarding Fatigue Crack Growth in Joined Structures,” 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20680
Kappe, Fabian, Simon Wituschek, Michael Lechner, Mathias Bobbert, Gerson Meschut, and Marion Merklein. “Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process,” 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 16859 |
Martin, Sven, Alan A. Camberg, and Thomas Tröster. “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion.” Procedia Manufacturing, 2020, 419–24. https://doi.org/10.1016/j.promfg.2020.04.324.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 30713
Rostek, Tim, Eugen Wiens, and Werner Homberg. “Joining with Versatile Friction-Spun Joint Connectors.” Procedia Manufacturing 47 (2020): 395–99. https://doi.org/10.1016/j.promfg.2020.04.313.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 51203
Köhler, Daniel, Robert Kupfer, and Maik Gude. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.” Journal of Advanced Joining Processes 2 (2020). https://doi.org/10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30647
Friedlein, J., S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann. “Inverse Parameter Identification of an Anisotropic Plasticity Model for Sheet Metal.” IOP Conference Series: Materials Science and Engineering 1157 (2021): 012004. https://doi.org/10.1088/1757-899X/1157/1/012004.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30645
Popp, J., M. Wolf, T. Mattner, and D. Drummer. “Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics.” Journal of Composites Science 5 (2021): 239. https://doi.org/10.3390/jcs5090239.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30643
Kalich, J., and U. Füssel. “Influence of the Production Process on the Binding Mechanism of Clinched Aluminum Steel Mixed Compounds.” Journal of Manufacturing and Materials Processing 5 (2021): 105. https://doi.org/10.3390/jmmp5040105.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30644
Pivovarov, D., J. Mergheim, K. Willner, and P. Steinmann. “Stochastic Local FEM for Computational Homogenization of Heterogeneous Materials Exhibiting Large Plastic Deformations.” Computational Mechanics, 2021. https://doi.org/10.1007/s00466-021-02099-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30642
Friedlein, J., J. Mergheim, and P. Steinmann. “Anisotropic Plasticity‐damage Material Model for Sheet Metal — Regularised Single Surface Formulation.” PAMM 21 (2021). https://doi.org/10.1002/pamm.202100068.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20807 |
Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains.” ESAFORM 2021, n.d. https://doi.org/10.25518/esaform21.4298.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 30650
Römisch, D., C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein. “Data-Driven Analysis of Cold-Formed Pin Structure Characteristics in the Context of Versatile Joining Processes.” IOP Conference Series: Materials Science and Engineering 1157 (2021): 012077. https://doi.org/10.1088/1757-899X/1157/1/012077.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30648
Steinfelder, C., J. Kalich, A. Brosius, and U. Füssel. “Numerical and Experimental Investigation of the Transmission Moment of Clinching Points.” IOP Conference Series: Materials Science and Engineering 1157 (2021): 012003. https://doi.org/10.1088/1757-899x/1157/1/012003.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30653
Popp, J., T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer. “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins.” Applied Composite Materials 28 (2021): 951–972. https://doi.org/10.1007/s10443-021-09892-0.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30652
Gröger, B., J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, and M. Gude. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.” Materials 14 (2021): 2286. https://doi.org/10.3390/ma14092286X.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30662
Busch, M., and T. Hausotte. “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks.” Key Engineering Materials 883 (2021): 41–48. https://doi.org/10.4028/www.scientific.net/kem.883.41.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30659
Köhler, D., R. Kupfer, J. Troschitz, and M. Gude. “Clinching in In-Situ CT – Experimental Study on Suitable Tool Materials.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30661
Köhler, D., R. Kupfer, J. Troschitz, and M. Gude. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.” Materials 14 (2021): 1859. https://doi.org/10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30719
Wituschek, S., and M. Lechner. “Friction Characterisation for a Tumbling Self-Piercing Riveting Process.” Key Engineering Materials 883 (2021): 27–34. https://doi.org/10.4028/www.scientific.net/kem.883.27.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30649
Wischer, Christian, Christian Steinfelder, Werner Homberg, and Alexander Brosius. “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis.” IOP Conference Series: Materials Science and Engineering 1157 (2021): 012007. https://doi.org/10.1088/1757-899x/1157/1/012007.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30702
Wischer, Christian, and Werner Homberg. “A Contribution on Versatile Process Chains: Joining with Adaptive Joining Elements, Formed by Friction Spinning.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01094-8.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30680
Weiß, D., B. Schramm, and G. Kullmer. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.” Key Engineering Materials 883 (2021): 127–32. https://doi.org/10.4028/www.scientific.net/kem.883.127.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30698
Gröger, B., D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, and M. Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30699
Weiß, D., B. Schramm, and G. Kullmer. “Holistic Investigation Chain for the Experimental Determination of Fracture Mechanical Material Parameters with Special Specimens.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01096-6.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30696
Zirngibl, C., B. Schleich, and S. Wartzack. “Approach for the Automated and Data-Based Design of Mechanical Joints.” Proceedings of the Design Society 1 (2021): 521. https://doi.org/10.1017/pds.2021.52.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30700
Zirngibl, C., F. Dworschak, B. Schleich, and S. Wartzack. “Application of Reinforcement Learning for the Optimization of Clinch Joint Characteristics.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01098-4.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30701
Römisch, D., J. Popp, D. Drummer, and M. Merklein. “Joining of CFRT-Steel Hybrid Parts via Hole-Forming and Subsequent Pin Caulking.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01093-9.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30697
Lafarge, R., A. Wolf, C. Guilleaume, and A. Brosius. “A New Non-Destructive Testing Method Applied to Clinching.” Minerals, Metals and Materials Series, 2021, 1461. https://doi.org/10.1007/978-3-030-75381-8_121.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30684
Römisch, D., M. Kraus, and M. Merklein. “Experimental Study on Joining by Forming of Hct590x + z and En-Aw 6014 Sheets Using Cold Extruded Pin Structures.” Journal of Manufacturing and Materials Processing 5 (2021): 25. https://doi.org/10.3390/jmmp5010025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30682
Römisch, D., M. Kraus, and M. Merklein. “Investigation of Different Joining by Forming Strategies When Connecting Different Metals without Auxiliary Elements.” Key Engineering Materials 883 (2021): 19–26. https://doi.org/10.4028/www.scientific.net/kem.883.19.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30718
Wituschek, S., and M. Lechner. “Material Characterisation Methods for a Tumbling Self-Piercing Riveting Process.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.398.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30683
Köhler, D., B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key Engineering Materials 883 (2021): 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30663
Ewenz, L., J. Kalich, M. Zimmermann, and U. Füssel. “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints.” Key Engineering Materials 883 (2021): 65–72. https://doi.org/10.4028/www.scientific.net/kem.883.65.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30688
Gröger, B., A. Hornig, A. Hoog, and M. Gude. “Modelling of Thermally Supported Clinching of Fibre-Reinforced Thermoplastics: Approaches on Mesoscale Considering Large Deformations and Fibre Failure.” ESAFORM 2021 - 24th International Conference on Material Forming, 2021. https://doi.org/10.25518/esaform21.4293.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30685
Wiens, E., C. Wischer, and W. Homberg. “Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).” ESAFORM, 2021, 4682. https://doi.org/10.25518/esaform21.4682.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30664
Harzheim, S., C. Steinfelder, T. Wallmersperger, and A. Brosius. “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials 883 (2021): 97–104. https://doi.org/10.4028/www.scientific.net/kem.883.97.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30694
Friedlein, J., J. Mergheim, and P. Steinmann. “A Finite Plasticity Gradient-Damage Model for Sheet Metals during Forming and Clinching.” Key Engineering Materials 883 KEM (2021): 57. https://doi.org/10.4028/www.scientific.net/KEM.883.57.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30689
Gröger, B., A. Hornig, A. Hoog, and M. Gude. “Temperature Dependent Modelling of Fibre-Reinforced Thermoplastic Organo-Sheet Material for Forming and Joining Process Simulations.” Key Engineering Materials 883 KEM (2021): 49. https://doi.org/10.4028/www.scientific.net/KEM.883.49.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30720
Hofmann, M., Y. Shi, and T. Wallmersperger. “A First Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement.” PAMM 20 (2021). https://doi.org/10.1002/pamm.202000122.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30695
Zirngibl, C., and B. Schleich. “Approach for the Automated Analysis of Geometrical Clinch Joint Characteristics.” Key Engineering Materials 883 KEM (2021): 105. https://doi.org/10.4028/www.scientific.net/KEM.883.105.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34208
Pivovarov, Dmytro, Julia Mergheim, Kai Willner, and Paul Steinmann. “Parametric FEM for Computational Homogenization of Heterogeneous Materials with Random Voids.” In PAMM, Vol. 20. Wiley, 2021. https://doi.org/10.1002/pamm.202000071.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
Böhnke, Max, Moritz Sebastian Rossel, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” The International Journal of Advanced Manufacturing Technology, 2021. https://doi.org/10.1007/s00170-021-07986-4.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 38517
Popp, Julian, Tobias Kleffel, and Dietmar Drummer. “Influence of Pin Geometry on the Joint Strength of CFRT-Metal Hybrid Parts with Metallic Pins.” Joining Plastics 15, no. 3–4 (2021).
LibreCat
2021 | Conference Paper | LibreCat-ID: 34472
Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,” DVM-Bericht 253:107–16, 2021. https://doi.org/10.48447/BR-2021-013.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24006
Weiß, Deborah, Britta Schramm, Moritz Neuser, Olexandr Grydin, and Gunter Kullmer. “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” DVM-Bericht 253:231–40, 2021. https://doi.org/10.48447/BR-2021-025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34227
Rossel, Moritz Sebastian, Max Böhnke, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Key Engineering Materials 883 (2021): 81–88. https://doi.org/10.4028/www.scientific.net/kem.883.81.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
Kappe, Fabian, Christian Roman Bielak, Vadim Sartisson, Mathias Bobbert, and Gerson Meschut. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.” In ESAFORM 2021. University of Liege, 2021. https://doi.org/10.25518/esaform21.4277.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, Max, Fabian Kappe, Mathias Bobbert, and Gerson Meschut. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” Materials Testing 63, no. 6 (2021): 493–500. https://doi.org/10.1515/mt-2020-0082.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials 883 (2021): 3–10. https://doi.org/10.4028/www.scientific.net/kem.883.3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30200
Wituschek, Simon, Fabian Kappe, and Michael Lechner. “Investigation of the Influence of Varying Tumbling Strategies on a Tumbling Self-Piercing Riveting Process.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01099-3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24541
Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.” Key Engineering Materials, 2021, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.3801.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 26082
Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining Processes 3 (2021). https://doi.org/10.1016/j.jajp.2021.100060.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51202
Köhler, Daniel, Behdad Sadeghian, Robert Kupfer, Juliane Troschitz, Maik Gude, and Alexander Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key Engineering Materials 883 (2021): 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51199
Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz, Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering 16, no. 2–3 (2021): 203–12. https://doi.org/10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51200
Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.” Materials 14, no. 8 (2021). https://doi.org/10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51201
Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51198
Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Journal of Advanced Joining Processes 5 (2021). https://doi.org/10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, Fabian Kappe, M Busch, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, Gerson Meschut, and T Hausotte. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34211
Friedlein, Johannes, Julia Mergheim, and Paul Steinmann. “Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal.” In The Minerals, Metals & Materials Series. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-031-06212-4_31.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
Ewenz, L., Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert, Gerson Meschut, and M. Zimmermann. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering 16, no. 2–3 (2022): 305–13. https://doi.org/10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34212
Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes.” In The Minerals, Metals & Materials Series. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-031-06212-4_75.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
Römisch, David, Martin Kraus, and Marion Merklein. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236, no. 6 (2022): 1187–1202. https://doi.org/10.1177/14644207221081408.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.” Applied Sciences 12, no. 10 (2022). https://doi.org/10.3390/app12104962.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
Troschitz, Juliane, Benjamin Gröger, Veit Würfel, Robert Kupfer, and Maik Gude. “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation.” Materials 15, no. 15 (2022). https://doi.org/10.3390/ma15155454.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten in Der Industriellen Computertomografie.” Tm - Technisches Messen 89, no. s1 (2022): 20–24. https://doi.org/10.1515/teme-2022-0065.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
Busch, Matthias, Lorenz Butzhammer, and Tino Hausotte. “Herausforderungen Bei Computertomografischen Untersuchungen von Fügeverbindungen.” Tm - Technisches Messen 89, no. s1 (2022): 83–88. https://doi.org/10.1515/teme-2022-0061.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
Zirngibl, Christoph, Christopher Sauer, Benjamin Schleich, and Sandro Wartzack. “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections.” In Volume 2: 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers, 2022. https://doi.org/10.1115/detc2022-89172.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels.” AI 3, no. 4 (2022): 990–1006. https://doi.org/10.3390/ai3040059.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Journal of Advanced Joining Processes 5 (2022): 100089. https://doi.org/10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
Popp, J., and D. Drummer. “Joining of Continuous Fiber Reinforced Thermoplastic/Steel Hybrid Parts via Undercutting Pin Structures and Infrared Heating.” Journal of Advanced Joining Processes 5 (2022): 100084. https://doi.org/10.1016/j.jajp.2021.100084.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
Ewenz, L., M. Kuczyk, and M. Zimmermann. “Effect of the Tool Geometry on Microstructure and Geometrical Features of Clinched Aluminum.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2021.100091.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
Gröger, B., V. Würfel, A. Hornig, and M. Gude. “Forming Process Induced Material Structure of Fibre-Reinforced Thermoplastics - Experimental and Numerical Investigation of a Bladder-Assisted Moulding Process.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100100.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
Wituschek, S., and M. Lechner. “Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process.” Production Engineering, 2022. https://doi.org/10.1177/14644207221080068.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
Steinfelder, C., J. Acksteiner, C. Guilleaume, and A. Brosius. “Analysis of the Interactions between Joint and Component Properties during Clinching.” Production Engineering, 2022. https://doi.org/10.1007/s11740-021-01102-x.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
Busch, M., and T. Hausotte. “Application of an Edge Detection Algorithm for Surface Determination in Industrial X-Ray Computed Tomography.” Production Engineering, 2022. https://doi.org/10.1007/s11740-021-01100-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
Kalich, J., and U. Füssel. “Design of Clinched Joints on the Basis of Binding Mechanisms.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01108-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
Friedlein, J., J. Mergheim, and P. Steinmann. “Observations on Additive Plasticity in the Logarithmic Strain Space at Excessive Strains.” International Journal of Solids and Structures 239–240 (2022): 111416. https://doi.org/10.1016/j.ijsolstr.2021.111416.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
Harzheim, Sven, Lars Ewenz, Martina Zimmermann, and Thomas Wallmersperger. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100130.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
Zeuner, André Till, Lars Ewenz, Jan Kalich, Sebastian Schöne, Uwe Füssel, and Martina Zimmermann. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.” Metals 12, no. 9 (2022). https://doi.org/10.3390/met12091514.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
Römisch, David, Christoph Zirngibl, Benjamin Schleich, Sandro Wartzack, and Marion Merklein. “Robustness Analysis of Pin Joining.” Journal of Manufacturing and Materials Processing 6, no. 5 (2022). https://doi.org/10.3390/jmmp6050122.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060146.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060127.
LibreCat
| DOI
| Download (ext.)