Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

165 Publications


2024 | Journal Article | LibreCat-ID: 51737
An alternative and robust formulation of the fatigue crack growth rate curve for long cracks
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics 296 (2024).
LibreCat | DOI
 

2024 | Conference Paper | LibreCat-ID: 53394
Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven
G. Kullmer, D. Weiß, B. Schramm, in: Deutscher Verband für Materialforschung und –prüfung e.V., 2024.
LibreCat | DOI
 

2023 | Journal Article | LibreCat-ID: 36800 | OA
Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners
M. Busch, T. Hausotte, Journal of Sensors and Sensor Systems 12 (2023) 1–8.
LibreCat | DOI | Download (ext.)
 

2023 | Conference Paper | LibreCat-ID: 38509
Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers
A. Brosius, L. Ewenz, R. Stephan, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat
 

2023 | Conference Paper | LibreCat-ID: 38511
Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung
L. Ewenz, M. Kuczyk, S. Schöne, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat
 

2023 | Conference Paper | LibreCat-ID: 38507
Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen
L. Ewenz, R. Kühne, S. Schöne, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat
 

2023 | Conference Paper | LibreCat-ID: 46476
Versatile self-piercing riveting with a tumbling superimposed punch
S. Wituschek, L. Elbel, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI
 

2023 | Conference Paper | LibreCat-ID: 51190
Comparison of ex- and in-situ investigations of clinched single-lap shear specimens
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI
 

2023 | Book Chapter | LibreCat-ID: 51194
In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Lecture Notes in Production Engineering, Springer International Publishing, Cham, 2023.
LibreCat | DOI
 

2023 | Conference Paper | LibreCat-ID: 43462
A calibration method for failure modeling in clinching process simulations
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI
 

2023 | Conference Paper | LibreCat-ID: 43463
Influence of plastic orthotropy on clinching of sheet metal
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI
 

2023 | Book Chapter | LibreCat-ID: 52614
Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat | DOI
 

2023 | Conference Paper | LibreCat-ID: 52831 | OA
Dynamic conformity assessment for joining force monitoring using Bayes filters
L. Butzhammer, F. Kappe, G. Meschut, T. Hausotte, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI | Download (ext.)
 

2023 | Conference Paper | LibreCat-ID: 52821 | OA
Combination of versatile self-piercing riveting processes
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat | DOI | Download (ext.)
 

2023 | Conference Paper | LibreCat-ID: 51739
Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss
D. Weiß, T. Duffe, M. Buczek, G. Kullmer, B. Schramm, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2023.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34207
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 34211
Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal
J. Friedlein, J. Mergheim, P. Steinmann, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34213
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 34212
Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34219
Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34223
Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34225
Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34221
Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34220
Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 34415
Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections
C. Zirngibl, C. Sauer, B. Schleich, S. Wartzack, in: Volume 2: 42nd Computers and Information in Engineering Conference (CIE), American Society of Mechanical Engineers, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34417 | OA
Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels
C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 30626
Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30625
Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30624
Effect of the tool geometry on microstructure and geometrical features of clinched aluminum
L. Ewenz, M. Kuczyk, M. Zimmermann, Journal of Advanced Joining Processes 5 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30622
Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process
B. Gröger, V. Würfel, A. Hornig, M. Gude, Journal of Advanced Joining Processes 5 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30717
Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30629
Analysis of the interactions between joint and component properties during clinching
C. Steinfelder, J. Acksteiner, C. Guilleaume, A. Brosius, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30640
Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography
M. Busch, T. Hausotte, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30628
Design of clinched joints on the basis of binding mechanisms
J. Kalich, U. Füssel, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30627
Observations on additive plasticity in the logarithmic strain space at excessive strains
J. Friedlein, J. Mergheim, P. Steinmann, International Journal of Solids and Structures 239–240 (2022) 111416.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34253 | OA
Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations
S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34252 | OA
The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34249 | OA
Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34255 | OA
Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions
A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34248 | OA
Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34247 | OA
Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites
B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34256 | OA
A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters
J. Gerritzen, A. Hornig, B. Gröger, M. Gude, Journal of Composites Science 6 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34214
Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation
J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 34209
A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement
Y. Shi, S. Harzheim, M. Hofmann, T. Wallmersperger, in: Material Modeling and Structural Mechanics, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34251 | OA
Long-Term Behavior of Clinched Electrical Contacts
J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel, Metals 12 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34254 | OA
Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study
B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34257 | OA
Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion
S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica 233 (2022) 4427–4439.
LibreCat | DOI | Download (ext.)
 

2022 | Conference Paper | LibreCat-ID: 34250 | OA
Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements
U. Füssel, S. Schlegel, G. Reschke, J. Kalich, in: SFU/ICAFT 2022, MDPI, 2022.
LibreCat | DOI | Download (ext.)
 

2022 | Conference Paper | LibreCat-ID: 34280
Investigations on Combined in situ CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34414 | OA
Robust estimation of clinch joint characteristics based on data-driven methods
C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34261
Numerical fatigue life prediction of corroded and non-corroded clinched joints
S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6.
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 36462 | OA
Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets
R. Stephan, A. Brosius, in: The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022.
LibreCat | DOI | Download (ext.)
 

2022 | Conference Paper | LibreCat-ID: 36468
Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design
D. Römisch, M. Merklein, in: 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 36470
Versatile tool design for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, in: 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 36473 | OA
Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, in: 2022.
LibreCat | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 34264 | OA
Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere
L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 33002
Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 33003
Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34572
Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 35271
Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen
D. Weiß, B. Schramm, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 879–885.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34243
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34242
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 31360
Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34224
Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations
T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 30726
Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 139–147.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34070
A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase
B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34246
Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34241
Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30100
Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 34275
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34244
Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 29858
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 29857
Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34403
Fracture mechanical evaluation of the material HCT590X
B. Schramm, D. Weiß, Materials Testing 64 (2022) 1437–1449.
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 34210
Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 30962
Numerical investigation of a friction test to determine the friction coefficients for the clinching process
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34069
A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase
B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut, T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes 6 (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34068
A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 29951 | OA
Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 32813 | OA
Influence of the Surrounding Sheet Geometry on a Clinched Joint
S. Martin, K. Kurtusic, T. Tröster, Key Engineering Materials 927 (2022).
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 51197
Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 51192
Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 51191
Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat
 

2022 | Book Chapter | LibreCat-ID: 51195
Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &amp; Materials Series, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 29724
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 29505
Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 31828
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat | DOI
 

2022 | Book Chapter | LibreCat-ID: 29771
Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34215
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30647
Inverse parameter identification of an anisotropic plasticity model for sheet metal
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30645
Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30643
Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds
J. Kalich, U. Füssel, Journal of Manufacturing and Materials Processing 5 (2021) 105.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30644
Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, Computational Mechanics (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30642
Anisotropic plasticity‐damage material model for sheet metal — Regularised single surface formulation
J. Friedlein, J. Mergheim, P. Steinmann, PAMM 21 (2021).
LibreCat | DOI
 

2021 | Conference Paper | LibreCat-ID: 20807 | OA
Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
LibreCat | DOI | Download (ext.)
 

2021 | Journal Article | LibreCat-ID: 30650
Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30648
Numerical and experimental investigation of the transmission moment of clinching points
C. Steinfelder, J. Kalich, A. Brosius, U. Füssel, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012003.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30653
Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30652
Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies
B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut, M. Gude, Materials 14 (2021) 2286.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30662
Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks
M. Busch, T. Hausotte, Key Engineering Materials 883 (2021) 41–48.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30659
Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30661
In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021) 1859.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30719
Friction Characterisation for a Tumbling Self-Piercing Riveting Process
S. Wituschek, M. Lechner, Key Engineering Materials 883 (2021) 27–34.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30649
Joining with Friction Spun Joint Connectors – Manufacturing and Analysis
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30702
A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning
C. Wischer, W. Homberg, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30680
Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X
D. Weiß, B. Schramm, G. Kullmer, Key Engineering Materials 883 (2021) 127–132.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30698
Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30699
Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens
D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30696
Approach for the automated and data-based design of mechanical joints
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the Design Society 1 (2021) 521.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30700
Application of reinforcement learning for the optimization of clinch joint characteristics
C. Zirngibl, F. Dworschak, B. Schleich, S. Wartzack, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30701
Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
D. Römisch, J. Popp, D. Drummer, M. Merklein, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30697
A New Non-destructive Testing Method Applied to Clinching
R. Lafarge, A. Wolf, C. Guilleaume, A. Brosius, Minerals, Metals and Materials Series (2021) 1461.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30684
Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures
D. Römisch, M. Kraus, M. Merklein, Journal of Manufacturing and Materials Processing 5 (2021) 25.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30682
Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
D. Römisch, M. Kraus, M. Merklein, Key Engineering Materials 883 (2021) 19–26.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30718
Material characterisation methods for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, ESAFORM 2021 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30683
A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30663
Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints
L. Ewenz, J. Kalich, M. Zimmermann, U. Füssel, Key Engineering Materials 883 (2021) 65–72.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30688
Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure
B. Gröger, A. Hornig, A. Hoog, M. Gude, ESAFORM 2021 - 24th International Conference on Material Forming (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30685
Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC)
E. Wiens, C. Wischer, W. Homberg, ESAFORM (2021) 4682.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30664
A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints
S. Harzheim, C. Steinfelder, T. Wallmersperger, A. Brosius, Key Engineering Materials 883 (2021) 97–104.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30694
A finite plasticity gradient-damage model for sheet metals during forming and clinching
J. Friedlein, J. Mergheim, P. Steinmann, Key Engineering Materials 883 KEM (2021) 57.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30689
Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations
B. Gröger, A. Hornig, A. Hoog, M. Gude, Key Engineering Materials 883 KEM (2021) 49.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30720
A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement
M. Hofmann, Y. Shi, T. Wallmersperger, PAMM 20 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30695
Approach for the automated analysis of geometrical clinch joint characteristics
C. Zirngibl, B. Schleich, Key Engineering Materials 883 KEM (2021) 105.
LibreCat | DOI
 

2021 | Conference Paper | LibreCat-ID: 34208
Parametric FEM for computational homogenization of heterogeneous materials with random voids
D. Pivovarov, J. Mergheim, K. Willner, P. Steinmann, in: PAMM, Wiley, 2021.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 25556 | OA
Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
LibreCat | DOI | Download (ext.)
 

2021 | Journal Article | LibreCat-ID: 38517
Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
J. Popp, T. Kleffel, D. Drummer, Joining Plastics 15 (2021).
LibreCat
 

2021 | Conference Paper | LibreCat-ID: 34472
Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode
G. Kullmer, D. Weiß, B. Schramm, in: 2021, pp. 107–116.
LibreCat | DOI
 

2021 | Conference Paper | LibreCat-ID: 24006
Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie
D. Weiß, B. Schramm, M. Neuser, O. Grydin, G. Kullmer, in: 2021, pp. 231–240.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 34227
Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
LibreCat | DOI
 

2021 | Conference Paper | LibreCat-ID: 34222
Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 22798
Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 34226
New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 30200
Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
S. Wituschek, F. Kappe, M. Lechner, Production Engineering (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 24541
Load Path Transmission in Joining Elements
C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 24548 | OA
Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties
S. Martin, T. Tröster, ESAFORM 2021 (2021).
LibreCat | DOI | Download (ext.)
 

2021 | Journal Article | LibreCat-ID: 26082
Joining with versatile joining elements formed by friction spinning
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 51202
A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 51199
Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 51200
In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 51201
Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 51198
Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 29293 | OA
Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations
S. Martin, J. Schütte, C. Bäumler, W. Sextro, T. Tröster, Forces in Mechanics 6 (2021).
LibreCat | DOI | Download (ext.)
 

2021 | Journal Article | LibreCat-ID: 24535
Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).
LibreCat | DOI
 

2021 | Journal Article | LibreCat-ID: 24537
Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 20678
Numerical analysis of the robustness of clinching process considering the pre-forming of the parts
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020).
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30706
A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis
C. Steinfelder, A. Brosius, Lecture Notes in Production Engineering (2020) 134–141.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30704
Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading
H. Böhm, H. Zhang, B. Gröger, A. Hornig, M. Gude, Journal of Composites Science 4 (2020) 188.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30707
Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach
B. Sadeghian, C. Guilleaume, R. Lafarge, A. Brosius, Lecture Notes in Production Engineering (2020) 116–124.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30711
Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen
L. Ewenz, S. Schettler, A.T. Zeuner, M. Zimmermann, Tagung Werkstoffprüfung 2020. Werkstoffe Und Bauteile Auf Dem Prüfstand. Prüftechnik - Kennwertermit (2020).
LibreCat | DOI
 

2020 | Book Chapter | LibreCat-ID: 24575
Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30712
Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, M. Gude, Procedia Manufacturing 47 (2020) 940–947.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30710
Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen
C. Zirngibl, B. Schleich, S. Wartzack, Proceedings of the 31st Symposium Design for X (DFX2020) (2020).
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30709
Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020) 100034.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 30703
Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
M. Kraus, M. Merklein, Journal of Materials Processing Technology 283 (2020) 116697.
LibreCat | DOI
 

2020 | Conference Abstract | LibreCat-ID: 20344 | OA
Development of a numerical method for analyzing the robustness of clinching in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat | Files available
 

2020 | Journal Article | LibreCat-ID: 30721
Test Method for Friction Characterization of Rivets
S. Wituschek, C.M. Kuball, M. Merklein, M. Lechner, Defect and Diffusion Forum 404 (2020) 132–137.
LibreCat | DOI
 

2020 | Conference Paper | LibreCat-ID: 23980
Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, 28 (2020) 2335–2341.
LibreCat | DOI
 

2020 | Conference Abstract | LibreCat-ID: 23982
Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures
D. Weiß, B. Schramm, G. Kullmer, in: 2020.
LibreCat
 

2020 | Conference Paper | LibreCat-ID: 20680
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
LibreCat
 

2020 | Journal Article | LibreCat-ID: 16859 | OA
Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion
S. Martin, A.A. Camberg, T. Tröster, Procedia Manufacturing (2020) 419–424.
LibreCat | DOI | Download (ext.)
 

2020 | Journal Article | LibreCat-ID: 30713
Joining with Versatile Friction-Spun Joint Connectors
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
LibreCat | DOI
 

2020 | Journal Article | LibreCat-ID: 51203
Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020).
LibreCat | DOI
 

2019 | Journal Article | LibreCat-ID: 30716
Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
M. Kraus, P. Frey, T. Kleffel, D. Drummer, M. Merklein, AIP Conference Proceedings 2113 (2019) 050006.
LibreCat | DOI
 

Filters and Search Terms

(project=130)

status=public

Search

Filter Publications

Display / Sort

Export / Embed