Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2019 | Journal Article | LibreCat-ID: 30716
Kraus M, Frey P, Kleffel T, Drummer D, Merklein M. Mechanical joining without auxiliary element by cold formed pins for multi-material-systems. AIP Conference Proceedings. 2019;2113:050006. doi:10.1063/1.5112570
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20678
Bielak CR, Böhnke M, Beck R, Bobbert M, Meschut G. Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes . Published online 2020. doi:https://doi.org/10.1016/j.jajp.2020.100038
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30706
Steinfelder C, Brosius A. A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis. Lecture Notes in Production Engineering. Published online 2020:134-141. doi:10.1007/978-3-662-62138-7_14
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30704
Böhm H, Zhang H, Gröger B, Hornig A, Gude M. Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading. Journal of Composites Science. 2020;4:188. doi:10.3390/jcs4040188
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30707
Sadeghian B, Guilleaume C, Lafarge R, Brosius A. Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach. Lecture Notes in Production Engineering. Published online 2020:116-124. doi:10.1007/978-3-662-62138-7_12
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30711
Ewenz L, Schettler S, Zeuner AT, Zimmermann M. Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen. Tagung Werkstoffprüfung 2020 Werkstoffe und Bauteile auf dem Prüfstand Prüftechnik - Kennwertermit. Published online 2020. doi:10.48447/WP-2020-039
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24575
Grydin O, Stolbchenko M, Schaper M. Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2020. ; 2020:1039-1044. doi:10.1007/978-3-030-36408-3_141
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30712
Köhler D, Gröger B, Kupfer R, Hornig A, Gude M. Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process. Procedia Manufacturing. 2020;47:940-947. doi:10.1016/j.promfg.2020.04.288
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30710
Zirngibl C, Schleich B, Wartzack S. Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen. Proceedings of the 31st Symposium Design for X (DFX2020). Published online 2020. doi:10.35199/dfx2020.8
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30709
Köhler D, Kupfer R, Gude M. Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes. 2020;2:100034. doi:10.1016/j.jajp.2020.100034
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30703
Kraus M, Merklein M. Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures. Journal of Materials Processing Technology. 2020;283:116697. doi:10.1016/j.jmatprotec.2020.116697
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 20344 | 
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 30721
Wituschek S, Kuball CM, Merklein M, Lechner M. Test Method for Friction Characterization of Rivets. Defect and Diffusion Forum. 2020;404:132-137. doi:10.4028/www.scientific.net/ddf.404.132
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 23980
Weiß D, Schramm B, Kullmer G. Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets. 2020;28:2335-2341. doi:10.1016/j.prostr.2020.11.081
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 23982
Weiß D, Schramm B, Kullmer G. Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures. In: ; 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20680
Kappe F, Wituschek S, Lechner M, Bobbert M, Meschut G, Merklein M. Investigation of influencing parameters on the joint formation of the self-piercing riveting process. In: ; 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 16859 |
Martin S, Camberg AA, Tröster T. Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion. Procedia Manufacturing. Published online 2020:419-424. doi:10.1016/j.promfg.2020.04.324
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 30713
Rostek T, Wiens E, Homberg W. Joining with Versatile Friction-Spun Joint Connectors. Procedia Manufacturing. 2020;47:395-399. doi:10.1016/j.promfg.2020.04.313
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 51203
Köhler D, Kupfer R, Gude M. Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes. 2020;2. doi:10.1016/j.jajp.2020.100034
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30647
Friedlein J, Wituschek S, Lechner M, Mergheim J, Steinmann P. Inverse parameter identification of an anisotropic plasticity model for sheet metal. IOP Conference Series: Materials Science and Engineering. 2021;1157:012004. doi:10.1088/1757-899X/1157/1/012004
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30645
Popp J, Wolf M, Mattner T, Drummer D. Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics. Journal of Composites Science. 2021;5:239. doi:10.3390/jcs5090239
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30643
Kalich J, Füssel U. Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds. Journal of Manufacturing and Materials Processing. 2021;5:105. doi:10.3390/jmmp5040105
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30644
Pivovarov D, Mergheim J, Willner K, Steinmann P. Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations. Computational Mechanics. Published online 2021. doi:10.1007/s00466-021-02099-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30642
Friedlein J, Mergheim J, Steinmann P. Anisotropic plasticity‐damage material model for sheet metal — Regularised single surface formulation. PAMM. 2021;21. doi:10.1002/pamm.202100068
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20807 |
Bielak CR, Böhnke M, Bobbert M, Meschut G. Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. doi:10.25518/esaform21.4298
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 30650
Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes. IOP Conference Series: Materials Science and Engineering. 2021;1157:012077. doi:10.1088/1757-899X/1157/1/012077
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30648
Steinfelder C, Kalich J, Brosius A, Füssel U. Numerical and experimental investigation of the transmission moment of clinching points. IOP Conference Series: Materials Science and Engineering. 2021;1157:012003. doi:10.1088/1757-899x/1157/1/012003
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30653
Popp J, Kleffel T, Römisch D, Papke T, Merklein M, Drummer D. Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins. Applied Composite Materials. 2021;28:951–972. doi:10.1007/s10443-021-09892-0
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30652
Gröger B, Troschitz J, Vorderbrüggen J, et al. Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies. Materials. 2021;14:2286. doi:10.3390/ma14092286X
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30662
Busch M, Hausotte T. Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks. Key Engineering Materials. 2021;883:41-48. doi:10.4028/www.scientific.net/kem.883.41
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30659
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.2781
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30661
Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14:1859. doi:10.3390/ma14081859
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30719
Wituschek S, Lechner M. Friction Characterisation for a Tumbling Self-Piercing Riveting Process. Key Engineering Materials. 2021;883:27-34. doi:10.4028/www.scientific.net/kem.883.27
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30649
Wischer C, Steinfelder C, Homberg W, Brosius A. Joining with Friction Spun Joint Connectors – Manufacturing and Analysis. IOP Conference Series: Materials Science and Engineering. 2021;1157:012007. doi:10.1088/1757-899x/1157/1/012007
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30702
Wischer C, Homberg W. A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01094-8
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30680
Weiß D, Schramm B, Kullmer G. Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. Key Engineering Materials. 2021;883:127-132. doi:10.4028/www.scientific.net/kem.883.127
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30698
Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01091-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30699
Weiß D, Schramm B, Kullmer G. Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01096-6
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30696
Zirngibl C, Schleich B, Wartzack S. Approach for the automated and data-based design of mechanical joints. Proceedings of the Design Society. 2021;1:521. doi:10.1017/pds.2021.52
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30700
Zirngibl C, Dworschak F, Schleich B, Wartzack S. Application of reinforcement learning for the optimization of clinch joint characteristics. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01098-4
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30701
Römisch D, Popp J, Drummer D, Merklein M. Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01093-9
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30697
Lafarge R, Wolf A, Guilleaume C, Brosius A. A New Non-destructive Testing Method Applied to Clinching. Minerals, Metals and Materials Series. Published online 2021:1461. doi:10.1007/978-3-030-75381-8_121
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30684
Römisch D, Kraus M, Merklein M. Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures. Journal of Manufacturing and Materials Processing. 2021;5:25. doi:10.3390/jmmp5010025
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30682
Römisch D, Kraus M, Merklein M. Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements. Key Engineering Materials. 2021;883:19-26. doi:10.4028/www.scientific.net/kem.883.19
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30718
Wituschek S, Lechner M. Material characterisation methods for a tumbling self-piercing riveting process. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.398
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30683
Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96. doi:10.4028/www.scientific.net/kem.883.89
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30663
Ewenz L, Kalich J, Zimmermann M, Füssel U. Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints. Key Engineering Materials. 2021;883:65-72. doi:10.4028/www.scientific.net/kem.883.65
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30688
Gröger B, Hornig A, Hoog A, Gude M. Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure. ESAFORM 2021 - 24th International Conference on Material Forming. Published online 2021. doi:10.25518/esaform21.4293
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30685
Wiens E, Wischer C, Homberg W. Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC). ESAFORM. Published online 2021:4682. doi:10.25518/esaform21.4682
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30664
Harzheim S, Steinfelder C, Wallmersperger T, Brosius A. A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2021;883:97-104. doi:10.4028/www.scientific.net/kem.883.97
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30694
Friedlein J, Mergheim J, Steinmann P. A finite plasticity gradient-damage model for sheet metals during forming and clinching. Key Engineering Materials. 2021;883 KEM:57. doi:10.4028/www.scientific.net/KEM.883.57
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30689
Gröger B, Hornig A, Hoog A, Gude M. Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations. Key Engineering Materials. 2021;883 KEM:49. doi:10.4028/www.scientific.net/KEM.883.49
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30720
Hofmann M, Shi Y, Wallmersperger T. A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement. PAMM. 2021;20. doi:10.1002/pamm.202000122
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30695
Zirngibl C, Schleich B. Approach for the automated analysis of geometrical clinch joint characteristics. Key Engineering Materials. 2021;883 KEM:105. doi:10.4028/www.scientific.net/KEM.883.105
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34208
Pivovarov D, Mergheim J, Willner K, Steinmann P. Parametric FEM for computational homogenization of heterogeneous materials with random voids. In: PAMM. Vol 20. Wiley; 2021. doi:10.1002/pamm.202000071
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
Böhnke M, Rossel MS, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. Published online 2021. doi:10.1007/s00170-021-07986-4
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 38517
Popp J, Kleffel T, Drummer D. Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins. Joining Plastics. 2021;15(3-4).
LibreCat
2021 | Conference Paper | LibreCat-ID: 34472
Kullmer G, Weiß D, Schramm B. Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode. In: Vol DVM-Bericht 253. ; 2021:107-116. doi:10.48447/BR-2021-013
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24006
Weiß D, Schramm B, Neuser M, Grydin O, Kullmer G. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie. In: Vol DVM-Bericht 253. ; 2021:231-240. doi:10.48447/BR-2021-025
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34227
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials. 2021;883:81-88. doi:10.4028/www.scientific.net/kem.883.81
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
Kappe F, Bielak CR, Sartisson V, Bobbert M, Meschut G. Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. In: ESAFORM 2021. University of Liege; 2021. doi:10.25518/esaform21.4277
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
Böhnke M, Kappe F, Bobbert M, Meschut G. Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing. 2021;63(6):493-500. doi:10.1515/mt-2020-0082
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10. doi:10.4028/www.scientific.net/kem.883.3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30200
Wituschek S, Kappe F, Lechner M. Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01099-3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24541
Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining Elements. Key Engineering Materials. Published online 2021:73-80. doi:10.4028/www.scientific.net/kem.883.73
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
Martin S, Tröster T. Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.3801
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 26082
Wischer C, Wiens E, Homberg W. Joining with versatile joining elements formed by friction spinning. Journal of Advanced Joining Processes. 2021;3. doi:10.1016/j.jajp.2021.100060
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51202
Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96. doi:10.4028/www.scientific.net/kem.883.89
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51199
Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering. 2021;16(2-3):203-212. doi:10.1007/s11740-021-01091-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51200
Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14(8). doi:10.3390/ma14081859
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51201
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.2781
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51198
Köhler D, Sadeghian B, Troschitz J, Kupfer R, Gude M, Brosius A. Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes. 2021;5. doi:10.1016/j.jajp.2021.100089
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
Neuser M, Grydin O, Andreiev A, Schaper M. Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. Metals. Published online 2021. doi:10.3390/met11081304
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
Neuser M, Kappe F, Busch M, et al. Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012005
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34211
Friedlein J, Mergheim J, Steinmann P. Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_31
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34212
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_75
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
Römisch D, Kraus M, Merklein M. Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2022;236(6):1187-1202. doi:10.1177/14644207221081408
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
Popp J, Römisch D, Merklein M, Drummer D. Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. Applied Sciences. 2022;12(10). doi:10.3390/app12104962
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
Troschitz J, Gröger B, Würfel V, Kupfer R, Gude M. Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation. Materials. 2022;15(15). doi:10.3390/ma15155454
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
Binder F, Hausotte T. Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie. tm - Technisches Messen. 2022;89(s1):20-24. doi:10.1515/teme-2022-0065
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
Busch M, Butzhammer L, Hausotte T. Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen. tm - Technisches Messen. 2022;89(s1):83-88. doi:10.1515/teme-2022-0061
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
Zirngibl C, Sauer C, Schleich B, Wartzack S. Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections. In: Volume 2: 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers; 2022. doi:10.1115/detc2022-89172
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
Zirngibl C, Schleich B, Wartzack S. Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels. AI. 2022;3(4):990-1006. doi:10.3390/ai3040059
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
Köhler D, Sadeghian B, Troschitz J, Kupfer R, Gude M, Brosius A. Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes. 2022;5:100089. doi:10.1016/j.jajp.2021.100089
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
Popp J, Drummer D. Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating. Journal of Advanced Joining Processes. 2022;5:100084. doi:10.1016/j.jajp.2021.100084
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
Ewenz L, Kuczyk M, Zimmermann M. Effect of the tool geometry on microstructure and geometrical features of clinched aluminum. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2021.100091
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
Gröger B, Würfel V, Hornig A, Gude M. Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100100
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
Wituschek S, Lechner M. Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process. Production Engineering. Published online 2022. doi:10.1177/14644207221080068
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
Steinfelder C, Acksteiner J, Guilleaume C, Brosius A. Analysis of the interactions between joint and component properties during clinching. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01102-x
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
Busch M, Hausotte T. Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01100-z
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
Kalich J, Füssel U. Design of clinched joints on the basis of binding mechanisms. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01108-z
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
Friedlein J, Mergheim J, Steinmann P. Observations on additive plasticity in the logarithmic strain space at excessive strains. International Journal of Solids and Structures. 2022;239-240:111416. doi:10.1016/j.ijsolstr.2021.111416
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
Harzheim S, Ewenz L, Zimmermann M, Wallmersperger T. Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100130
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
Zeuner AT, Ewenz L, Kalich J, Schöne S, Füssel U, Zimmermann M. The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints. Metals. 2022;12(9). doi:10.3390/met12091514
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Robustness Analysis of Pin Joining. Journal of Manufacturing and Materials Processing. 2022;6(5). doi:10.3390/jmmp6050122
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
Borowski A, Gröger B, Füßel R, Gude M. Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060146
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
Römisch D, Hetzel A, Wituschek S, Lechner M, Merklein M. Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060127
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34247 |
Gröger B, Römisch D, Kraus M, et al. Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers. 2022;14(22). doi:10.3390/polym14225039
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34256 |
Gerritzen J, Hornig A, Gröger B, Gude M. A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters. Journal of Composites Science. 2022;6(10). doi:10.3390/jcs6100318
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34214
Schaude J, Hausotte T. Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology. 2022;5(2):139-148. doi:10.1007/s41871-022-00143-9
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34209
Shi Y, Harzheim S, Hofmann M, Wallmersperger T. A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement. In: Material Modeling and Structural Mechanics. Springer International Publishing; 2022. doi:10.1007/978-3-030-97675-0_9
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34251 |
Kalich J, Matzke M, Pfeiffer W, Schlegel S, Kornhuber L, Füssel U. Long-Term Behavior of Clinched Electrical Contacts. Metals. 2022;12(10). doi:10.3390/met12101651
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34254 |
Gröger B, Wang J, Bätzel T, Hornig A, Gude M. Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. Materials. 2022;15(20). doi:10.3390/ma15207241
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34257 |
Harzheim S, Hofmann M, Wallmersperger T. Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion. Acta Mechanica. 2022;233(11):4427-4439. doi:10.1007/s00707-022-03326-z
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34250 |
Füssel U, Schlegel S, Reschke G, Kalich J. Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements. In: SFU/ICAFT 2022. MDPI; 2022. doi:10.3390/engproc2022026005
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34280
Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined in situ CT and Acoustic Analysis during Clinching. In: Key Engineering Materials. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:10.4028/p-32330d
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34414 |
Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology. Published online 2022. doi:10.1007/s00170-022-10441-7
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34261
Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures. Published online 2022:1-6. doi:10.1080/15376494.2022.2140233
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36462 |
Stephan R, Brosius A. Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets. In: The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT. MDPI; 2022. doi:10.3390/engproc2022026025
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 36468
Römisch D, Merklein M. Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design. In: ; 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 36470
Wituschek S, Lechner M. Versatile tool design for a tumbling self-piercing riveting process. In: ; 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 36473 |
Busch M, Köhler D, Hausotte T, Kupfer R, Troschitz J, Gude M. Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography. In: ; 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34264 |
Butzhammer L, Müller AM, Hausotte T. Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. Measurement Science and Technology. 2022;34(1). doi:10.1088/1361-6501/ac9856
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 33002
Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572. doi:10.4028/p-wpuzyw
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_52
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221145886
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 35271
Weiß D, Schramm B. Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen. In: Procedia Structural Integrity. Vol 42. Elsevier BV; 2022:879-885. doi:10.1016/j.prostr.2022.12.111
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34216
Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34243
Wituschek S, Kappe F, Meschut G, Lechner M. Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221135400
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34242
Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31360
Oesterwinter A, Wischer C, Homberg W. Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). Metals. 2022;12(5). doi:10.3390/met12050869
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34224
Joy TD, Weiß D, Schramm B, Kullmer G. Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. Applied Sciences. 2022;12(15). doi:10.3390/app12157557
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30726
Weiß D, Schramm B, Kullmer G. Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets. In: Procedia Structural Integrity. Vol 39. Elsevier BV; 2022:139-147. doi:10.1016/j.prostr.2022.03.082
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34070
Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100135
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34246
Kullmer G, Weiß D, Schramm B. Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method. Engineering Fracture Mechanics. Published online 2022. doi:10.1016/j.engfracmech.2022.108899
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34241
Kappe F, Wituschek S, Bobbert M, Lechner M, Meschut G. Joining of multi-material structures using a versatile self-piercing riveting process. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01151-w
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl C, Kügler P, Popp J, et al. Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01117-y
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34275
Kappe F, Wituschek S, de Pascalis V, Bobbert M, Lechner M, Meschut G. Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In: Materials Design and Applications IV. Springer International Publishing; 2022. doi:10.1007/978-3-031-18130-6_10
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34244
Kappe F, Zirngibl C, Schleich B, Bobbert M, Wartzack S, Meschut G. Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods. Journal of Manufacturing Processes. 2022;84:1438-1448. doi:10.1016/j.jmapro.2022.11.019
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29858
Kappe F, Schadow L, Bobbert M, Meschut G. Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications. Published online 2022. doi:10.1177/14644207211070992
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29857
Kappe F, Wituschek S, Bobbert M, Meschut G. Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. Production Engineering. Published online 2022. doi:https://doi.org/10.1007/s11740-022-01105-2
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34403
Schramm B, Weiß D. Fracture mechanical evaluation of the material HCT590X. Materials Testing. 2022;64(10):1437-1449. doi:10.1515/mt-2022-0191
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34210
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_15
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30962
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction test to determine the friction coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221093468
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34068
Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32813 |
Martin S, Kurtusic K, Tröster T. Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials. 2022;927. doi: https://doi.org/10.4028/p-09md1c
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 51197
Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching. Key Engineering Materials. 2022;926:1489-1497. doi:10.4028/p-32330d
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51192
Busch M, Köhler D, Hausotte T, Kupfer R, Troschitz J, Gude M. Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography. e-Journal of Nondestructive Testing. 2022;27(12). doi:10.58286/27519
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51191
Köhler D, Kupfer R, Troschitz J, Gude M. Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen. In: Zimmermann M, ed. Tagungsband zur Werkstoffprüfung 2022. ; 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 51195
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_75
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29724
Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
Neuser M, Grydin O, Frolov Y, Schaper M. Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01106-1
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31828
Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
Grydin O, Mortensen D, Neuser M, Lindholm D, Fjaer HG, Schaper M. Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2022. Springer International Publishing; 2022. doi:10.1007/978-3-030-92529-1_96
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34215
Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 36800 |
Busch M, Hausotte T. Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners. Journal of Sensors and Sensor Systems. 2023;12(1):1-8. doi:10.5194/jsss-12-1-2023
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 38509
Brosius A, Ewenz L, Stephan R, Zimmermann M. Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers. In: Zimmermann M, ed. Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM); 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38511
Ewenz L, Kuczyk M, Schöne S, Zimmermann M. Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung. In: Zimmermann M, ed. Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM); 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38507
Ewenz L, Kühne R, Schöne S, Zimmermann M. Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen. In: Zimmermann M, ed. Tagung Werkstoffprüfung 2022. Deutsche Gesellschaft für Materialkunde e.V. (DGM); 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46476
Wituschek S, Elbel L, Lechner M. Versatile self-piercing riveting with a tumbling superimposed punch. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902479-122
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 51190
Köhler D, Kupfer R, Troschitz J, Gude M. Comparison of ex- and in-situ investigations of clinched single-lap shear specimens. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-20
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51194
Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point. In: Lecture Notes in Production Engineering. Springer International Publishing; 2023. doi:10.1007/978-3-031-18318-8_28
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke M, Bielak CR, Friedlein J, et al. A calibration method for failure modeling in clinching process simulations. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-34
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein J, Bielak CR, Böhnke M, et al. Influence of plastic orthotropy on clinching of sheet metal. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-17
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52614
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_15
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
Butzhammer L, Kappe F, Meschut G, Hausotte T. Dynamic conformity assessment for joining force monitoring using Bayes filters. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-48
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
Wituschek S, Kappe F, Meschut G, Lechner M. Combination of versatile self-piercing riveting processes. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-16
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51739
Weiß D, Duffe T, Buczek M, Kullmer G, Schramm B. Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss. In: Deutscher Verband für Materialforschung und -prüfung e.V.; 2023. doi:10.48447/WP-2023-244
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 51737
Kullmer G, Weiß D, Schramm B. An alternative and robust formulation of the fatigue crack growth rate curve for long cracks. Engineering Fracture Mechanics. 2024;296. doi:10.1016/j.engfracmech.2023.109826
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 53394
Kullmer G, Weiß D, Schramm B. Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven. In: Deutscher Verband für Materialforschung und –prüfung e.V.; 2024. doi:10.48447/BR-2024-369
LibreCat
| DOI