Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2019 | Journal Article | LibreCat-ID: 30716
M. Kraus, P. Frey, T. Kleffel, D. Drummer, and M. Merklein, “Mechanical joining without auxiliary element by cold formed pins for multi-material-systems,” AIP Conference Proceedings, vol. 2113, p. 050006, 2019, doi: 10.1063/1.5112570.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20678
C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,” Journal of Advanced Joining Processes. , 2020, doi: https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30706
C. Steinfelder and A. Brosius, “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis,” Lecture Notes in Production Engineering, pp. 134–141, 2020, doi: 10.1007/978-3-662-62138-7_14.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30704
H. Böhm, H. Zhang, B. Gröger, A. Hornig, and M. Gude, “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading,” Journal of Composites Science, vol. 4, p. 188, 2020, doi: 10.3390/jcs4040188.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30707
B. Sadeghian, C. Guilleaume, R. Lafarge, and A. Brosius, “Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach,” Lecture Notes in Production Engineering, pp. 116–124, 2020, doi: 10.1007/978-3-662-62138-7_12.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30711
L. Ewenz, S. Schettler, A. T. Zeuner, and M. Zimmermann, “Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen,” Tagung Werkstoffprüfung 2020. Werkstoffe und Bauteile auf dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi: 10.48447/WP-2020-039.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30712
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, and M. Gude, “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process,” Procedia Manufacturing, vol. 47, pp. 940–947, 2020, doi: 10.1016/j.promfg.2020.04.288.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30710
C. Zirngibl, B. Schleich, and S. Wartzack, “Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen,” Proceedings of the 31st Symposium Design for X (DFX2020), 2020, doi: 10.35199/dfx2020.8.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30709
D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,” Journal of Advanced Joining Processes, vol. 2, p. 100034, 2020, doi: 10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30703
M. Kraus and M. Merklein, “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures,” Journal of Materials Processing Technology, vol. 283, p. 116697, 2020, doi: 10.1016/j.jmatprotec.2020.116697.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 20344 | 
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a numerical method for analyzing the robustness of clinching in versatile process chains,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 30721
S. Wituschek, C. M. Kuball, M. Merklein, and M. Lechner, “Test Method for Friction Characterization of Rivets,” Defect and Diffusion Forum, vol. 404, pp. 132–137, 2020, doi: 10.4028/www.scientific.net/ddf.404.132.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 23980
D. Weiß, B. Schramm, and G. Kullmer, “Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets,” vol. 28. Elsevier, pp. 2335–2341, 2020, doi: 10.1016/j.prostr.2020.11.081.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 23982
D. Weiß, B. Schramm, and G. Kullmer, “Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures,” presented at the Material Science and Engineering Congress - MSE2020, Darmstadt, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20680
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, and M. Merklein, “Investigation of influencing parameters on the joint formation of the self-piercing riveting process,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt , 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 16859 |
S. Martin, A. A. Camberg, and T. Tröster, “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion,” Procedia Manufacturing, pp. 419–424, 2020, doi: 10.1016/j.promfg.2020.04.324.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 30713
T. Rostek, E. Wiens, and W. Homberg, “Joining with Versatile Friction-Spun Joint Connectors,” Procedia Manufacturing, vol. 47, pp. 395–399, 2020, doi: 10.1016/j.promfg.2020.04.313.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 51203
D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,” Journal of Advanced Joining Processes, vol. 2, Art. no. 100034, 2020, doi: 10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30647
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann, “Inverse parameter identification of an anisotropic plasticity model for sheet metal,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012004, 2021, doi: 10.1088/1757-899X/1157/1/012004.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30645
J. Popp, M. Wolf, T. Mattner, and D. Drummer, “Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics,” Journal of Composites Science, vol. 5, p. 239, 2021, doi: 10.3390/jcs5090239.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30643
J. Kalich and U. Füssel, “Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds,” Journal of Manufacturing and Materials Processing, vol. 5, p. 105, 2021, doi: 10.3390/jmmp5040105.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30644
D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations,” Computational Mechanics, 2021, doi: 10.1007/s00466-021-02099-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30642
J. Friedlein, J. Mergheim, and P. Steinmann, “Anisotropic plasticity‐damage material model for sheet metal — Regularised single surface formulation,” PAMM, vol. 21, 2021, doi: 10.1002/pamm.202100068.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20807 |
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,” presented at the ESAFORM 2021, Lüttich, doi: 10.25518/esaform21.4298.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 30650
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012077, 2021, doi: 10.1088/1757-899X/1157/1/012077.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30648
C. Steinfelder, J. Kalich, A. Brosius, and U. Füssel, “Numerical and experimental investigation of the transmission moment of clinching points,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012003, 2021, doi: 10.1088/1757-899x/1157/1/012003.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30653
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer, “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins,” Applied Composite Materials, vol. 28, pp. 951–972, 2021, doi: 10.1007/s10443-021-09892-0.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30652
B. Gröger et al., “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies,” Materials, vol. 14, p. 2286, 2021, doi: 10.3390/ma14092286X.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30662
M. Busch and T. Hausotte, “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks,” Key Engineering Materials, vol. 883, pp. 41–48, 2021, doi: 10.4028/www.scientific.net/kem.883.41.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30659
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30661
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, p. 1859, 2021, doi: 10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30719
S. Wituschek and M. Lechner, “Friction Characterisation for a Tumbling Self-Piercing Riveting Process,” Key Engineering Materials, vol. 883, pp. 27–34, 2021, doi: 10.4028/www.scientific.net/kem.883.27.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30649
C. Wischer, C. Steinfelder, W. Homberg, and A. Brosius, “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012007, 2021, doi: 10.1088/1757-899x/1157/1/012007.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30702
C. Wischer and W. Homberg, “A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning,” Production Engineering, 2021, doi: 10.1007/s11740-021-01094-8.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30680
D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X,” Key Engineering Materials, vol. 883, pp. 127–132, 2021, doi: 10.4028/www.scientific.net/kem.883.127.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30698
B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” Production Engineering, 2021, doi: 10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30699
D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,” Production Engineering, 2021, doi: 10.1007/s11740-021-01096-6.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30696
C. Zirngibl, B. Schleich, and S. Wartzack, “Approach for the automated and data-based design of mechanical joints,” Proceedings of the Design Society, vol. 1, p. 521, 2021, doi: 10.1017/pds.2021.52.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30700
C. Zirngibl, F. Dworschak, B. Schleich, and S. Wartzack, “Application of reinforcement learning for the optimization of clinch joint characteristics,” Production Engineering, 2021, doi: 10.1007/s11740-021-01098-4.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30701
D. Römisch, J. Popp, D. Drummer, and M. Merklein, “Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking,” Production Engineering, 2021, doi: 10.1007/s11740-021-01093-9.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30697
R. Lafarge, A. Wolf, C. Guilleaume, and A. Brosius, “A New Non-destructive Testing Method Applied to Clinching,” Minerals, Metals and Materials Series, p. 1461, 2021, doi: 10.1007/978-3-030-75381-8_121.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30684
D. Römisch, M. Kraus, and M. Merklein, “Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures,” Journal of Manufacturing and Materials Processing, vol. 5, p. 25, 2021, doi: 10.3390/jmmp5010025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30682
D. Römisch, M. Kraus, and M. Merklein, “Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements,” Key Engineering Materials, vol. 883, pp. 19–26, 2021, doi: 10.4028/www.scientific.net/kem.883.19.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30718
S. Wituschek and M. Lechner, “Material characterisation methods for a tumbling self-piercing riveting process,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.398.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30683
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,” Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30663
L. Ewenz, J. Kalich, M. Zimmermann, and U. Füssel, “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints,” Key Engineering Materials, vol. 883, pp. 65–72, 2021, doi: 10.4028/www.scientific.net/kem.883.65.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30688
B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure,” ESAFORM 2021 - 24th International Conference on Material Forming, 2021, doi: 10.25518/esaform21.4293.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30685
E. Wiens, C. Wischer, and W. Homberg, “Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC),” ESAFORM, p. 4682, 2021, doi: 10.25518/esaform21.4682.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30664
S. Harzheim, C. Steinfelder, T. Wallmersperger, and A. Brosius, “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 883, pp. 97–104, 2021, doi: 10.4028/www.scientific.net/kem.883.97.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30694
J. Friedlein, J. Mergheim, and P. Steinmann, “A finite plasticity gradient-damage model for sheet metals during forming and clinching,” Key Engineering Materials, vol. 883 KEM, p. 57, 2021, doi: 10.4028/www.scientific.net/KEM.883.57.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30689
B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations,” Key Engineering Materials, vol. 883 KEM, p. 49, 2021, doi: 10.4028/www.scientific.net/KEM.883.49.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30720
M. Hofmann, Y. Shi, and T. Wallmersperger, “A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement,” PAMM, vol. 20, 2021, doi: 10.1002/pamm.202000122.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30695
C. Zirngibl and B. Schleich, “Approach for the automated analysis of geometrical clinch joint characteristics,” Key Engineering Materials, vol. 883 KEM, p. 105, 2021, doi: 10.4028/www.scientific.net/KEM.883.105.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34208
D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Parametric FEM for computational homogenization of heterogeneous materials with random voids,” in PAMM, 2021, vol. 20, no. 1, doi: 10.1002/pamm.202000071.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” The International Journal of Advanced Manufacturing Technology, 2021, doi: 10.1007/s00170-021-07986-4.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 38517
J. Popp, T. Kleffel, and D. Drummer, “Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 34472
G. Kullmer, D. Weiß, and B. Schramm, “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,” Bremen, 2021, vol. DVM-Bericht 253, pp. 107–116, doi: 10.48447/BR-2021-013.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24006
D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34227
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” Key Engineering Materials, vol. 883, pp. 81–88, 2021, doi: 10.4028/www.scientific.net/kem.883.81.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
F. Kappe, C. R. Bielak, V. Sartisson, M. Bobbert, and G. Meschut, “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters,” 2021, doi: 10.25518/esaform21.4277.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,” Materials Testing, vol. 63, no. 6, pp. 493–500, 2021, doi: 10.1515/mt-2020-0082.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30200
S. Wituschek, F. Kappe, and M. Lechner, “Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process,” Production Engineering, 2021, doi: 10.1007/s11740-021-01099-3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24541
C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,” Key Engineering Materials, pp. 73–80, 2021, doi: 10.4028/www.scientific.net/kem.883.73.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.3801.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 26082
C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements formed by friction spinning,” Journal of Advanced Joining Processes, vol. 3, Art. no. 100060, 2021, doi: 10.1016/j.jajp.2021.100060.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51202
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,” Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51199
B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” Production Engineering, vol. 16, no. 2–3, pp. 203–212, 2021, doi: 10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51200
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, no. 8, Art. no. 1859, 2021, doi: 10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51201
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51198
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100089, 2021, doi: 10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
D. Römisch, M. Kraus, and M. Merklein, “Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, pp. 1187–1202, 2022, doi: 10.1177/14644207221081408.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,” Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi: 10.3390/app12104962.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,” Materials, vol. 15, no. 15, Art. no. 5454, 2022, doi: 10.3390/ma15155454.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,” tm - Technisches Messen, vol. 89, no. s1, pp. 20–24, 2022, doi: 10.1515/teme-2022-0065.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,” tm - Technisches Messen, vol. 89, no. s1, pp. 83–88, 2022, doi: 10.1515/teme-2022-0061.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
C. Zirngibl, C. Sauer, B. Schleich, and S. Wartzack, “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections,” 2022, doi: 10.1115/detc2022-89172.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels,” AI, vol. 3, no. 4, pp. 990–1006, 2022, doi: 10.3390/ai3040059.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, p. 100089, 2022, doi: 10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
J. Popp and D. Drummer, “Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating,” Journal of Advanced Joining Processes, vol. 5, p. 100084, 2022, doi: 10.1016/j.jajp.2021.100084.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
L. Ewenz, M. Kuczyk, and M. Zimmermann, “Effect of the tool geometry on microstructure and geometrical features of clinched aluminum,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2021.100091.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
B. Gröger, V. Würfel, A. Hornig, and M. Gude, “Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2022.100100.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
S. Wituschek and M. Lechner, “Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process,” Production Engineering, 2022, doi: 10.1177/14644207221080068.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
C. Steinfelder, J. Acksteiner, C. Guilleaume, and A. Brosius, “Analysis of the interactions between joint and component properties during clinching,” Production Engineering, 2022, doi: 10.1007/s11740-021-01102-x.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
M. Busch and T. Hausotte, “Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography,” Production Engineering, 2022, doi: 10.1007/s11740-021-01100-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
J. Kalich and U. Füssel, “Design of clinched joints on the basis of binding mechanisms,” Production Engineering, 2022, doi: 10.1007/s11740-022-01108-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
J. Friedlein, J. Mergheim, and P. Steinmann, “Observations on additive plasticity in the logarithmic strain space at excessive strains,” International Journal of Solids and Structures, vol. 239–240, p. 111416, 2022, doi: 10.1016/j.ijsolstr.2021.111416.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi: 10.1016/j.jajp.2022.100130.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
A. T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, and M. Zimmermann, “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints,” Metals, vol. 12, no. 9, Art. no. 1514, 2022, doi: 10.3390/met12091514.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,” Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi: 10.3390/jmmp6050122.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi: 10.3390/jmmp6060146.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi: 10.3390/jmmp6060127.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34247 |
B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,” Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi: 10.3390/polym14225039.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34256 |
J. Gerritzen, A. Hornig, B. Gröger, and M. Gude, “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters,” Journal of Composites Science, vol. 6, no. 10, Art. no. 318, 2022, doi: 10.3390/jcs6100318.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34214
J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,” Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi: 10.1007/s41871-022-00143-9.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34251 |
J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, and U. Füssel, “Long-Term Behavior of Clinched Electrical Contacts,” Metals, vol. 12, no. 10, Art. no. 1651, 2022, doi: 10.3390/met12101651.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34254 |
B. Gröger, J. Wang, T. Bätzel, A. Hornig, and M. Gude, “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study,” Materials, vol. 15, no. 20, Art. no. 7241, 2022, doi: 10.3390/ma15207241.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34257 |
S. Harzheim, M. Hofmann, and T. Wallmersperger, “Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion,” Acta Mechanica, vol. 233, no. 11, pp. 4427–4439, 2022, doi: 10.1007/s00707-022-03326-z.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34250 |
U. Füssel, S. Schlegel, G. Reschke, and J. Kalich, “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements,” 2022, doi: 10.3390/engproc2022026005.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34280
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34414 |
C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,” The International Journal of Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34261
S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,” Mechanics of Advanced Materials and Structures, pp. 1–6, 2022, doi: 10.1080/15376494.2022.2140233.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36462 |
R. Stephan and A. Brosius, “Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets,” 2022, doi: 10.3390/engproc2022026025.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 36468
D. Römisch and M. Merklein, “Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design,” presented at the 12th Tooling Conference and Exhibition, Örebro, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 36470
S. Wituschek and M. Lechner, “Versatile tool design for a tumbling self-piercing riveting process,” presented at the Tooling 2022 , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 36473 |
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,” presented at the 4 th Singapore International Non-destructive Testing Conference and Exhibition (SINCE2022), 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34264 |
L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,” Measurement Science and Technology, vol. 34, no. 1, Art. no. 015403, 2022, doi: 10.1088/1361-6501/ac9856.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 33002
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, doi: 10.1177/14644207221145886.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 35271
D. Weiß and B. Schramm, “Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen,” in Procedia Structural Integrity, Madeira, 2022, vol. 42, pp. 879–885, doi: 10.1016/j.prostr.2022.12.111.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34216
G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34243
S. Wituschek, F. Kappe, G. Meschut, and M. Lechner, “Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072211354, 2022, doi: 10.1177/14644207221135400.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34242
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31360
A. Oesterwinter, C. Wischer, and W. Homberg, “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC),” Metals, vol. 12, no. 5, Art. no. 869, 2022, doi: 10.3390/met12050869.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34224
T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,” Applied Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi: 10.3390/app12157557.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30726
D. Weiß, B. Schramm, and G. Kullmer, “Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets,” in Procedia Structural Integrity, online, 2022, vol. 39, pp. 139–147, doi: 10.1016/j.prostr.2022.03.082.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34070
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,” Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi: 10.1016/j.jajp.2022.100135.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34246
G. Kullmer, D. Weiß, and B. Schramm, “Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method,” Engineering Fracture Mechanics, Art. no. 108899, 2022, doi: 10.1016/j.engfracmech.2022.108899.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34241
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, and G. Meschut, “Joining of multi-material structures using a versatile self-piercing riveting process,” Production Engineering, 2022, doi: 10.1007/s11740-022-01151-w.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30100
C. Zirngibl et al., “Provision of cross-domain knowledge in mechanical joining using ontologies,” Production Engineering, 2022, doi: 10.1007/s11740-022-01117-y.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34275
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, and G. Meschut, “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting,” in Materials Design and Applications IV, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34244
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, and G. Meschut, “Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods,” Journal of Manufacturing Processes, vol. 84, pp. 1438–1448, 2022, doi: 10.1016/j.jmapro.2022.11.019.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29858
F. Kappe, L. Schadow, M. Bobbert, and G. Meschut, “Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design,” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi: 10.1177/14644207211070992.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29857
F. Kappe, S. Wituschek, M. Bobbert, and G. Meschut, “Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints,” Production Engineering, 2022, doi: https://doi.org/10.1007/s11740-022-01105-2.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34403
B. Schramm and D. Weiß, “Fracture mechanical evaluation of the material HCT590X,” Materials Testing, vol. 64, no. 10, pp. 1437–1449, 2022, doi: 10.1515/mt-2022-0191.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34210
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30962
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation of a friction test to determine the friction coefficients for the clinching process,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi: 10.1177/14644207221093468.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34068
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32813 |
S. Martin, K. Kurtusic, and T. Tröster, “Influence of the Surrounding Sheet Geometry on a Clinched Joint,” Key Engineering Materials, vol. 927, 2022, doi: https://doi.org/10.4028/p-09md1c.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 51197
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching,” Key Engineering Materials, vol. 926, pp. 1489–1497, 2022, doi: 10.4028/p-32330d.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51192
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,” e-Journal of Nondestructive Testing, vol. 27, no. 12, 2022, doi: 10.58286/27519.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51191
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen,” in Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31828
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 36800 |
M. Busch and T. Hausotte, “Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners,” Journal of Sensors and Sensor Systems, vol. 12, no. 1, pp. 1–8, 2023, doi: 10.5194/jsss-12-1-2023.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 38509
A. Brosius, L. Ewenz, R. Stephan, and M. Zimmermann, “Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers,” in Tagung Werkstoffprüfung 2022, Dresden, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38511
L. Ewenz, M. Kuczyk, S. Schöne, and M. Zimmermann, “Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung,” in Tagung Werkstoffprüfung 2022, Dresden, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38507
L. Ewenz, R. Kühne, S. Schöne, and M. Zimmermann, “Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen,” in Tagung Werkstoffprüfung 2022, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46476
S. Wituschek, L. Elbel, and M. Lechner, “Versatile self-piercing riveting with a tumbling superimposed punch,” 2023, doi: 10.21741/9781644902479-122.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 51190
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Comparison of ex- and in-situ investigations of clinched single-lap shear specimens,” 2023, doi: 10.21741/9781644902417-20.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51194
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point,” in Lecture Notes in Production Engineering, Cham: Springer International Publishing, 2023.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
M. Böhnke et al., “A calibration method for failure modeling in clinching process simulations,” 2023, doi: 10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
J. Friedlein et al., “Influence of plastic orthotropy on clinching of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
L. Butzhammer, F. Kappe, G. Meschut, and T. Hausotte, “Dynamic conformity assessment for joining force monitoring using Bayes filters,” 2023, doi: 10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
S. Wituschek, F. Kappe, G. Meschut, and M. Lechner, “Combination of versatile self-piercing riveting processes,” 2023, doi: 10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51739
D. Weiß, T. Duffe, M. Buczek, G. Kullmer, and B. Schramm, “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss,” presented at the Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin, 2023, doi: 10.48447/WP-2023-244.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 51737
G. Kullmer, D. Weiß, and B. Schramm, “An alternative and robust formulation of the fatigue crack growth rate curve for long cracks,” Engineering Fracture Mechanics, vol. 296, Art. no. 109826, 2024, doi: 10.1016/j.engfracmech.2023.109826.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 53394
G. Kullmer, D. Weiß, and B. Schramm, “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven,” presented at the 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel, 2024, doi: 10.48447/BR-2024-369.
LibreCat
| DOI