Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

300 Publications


2019 | Conference Paper | LibreCat-ID: 22144
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, “Reconstruction of a defective finger joint surface and development of an adapted external fixator,” in Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat
 

2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat | DOI
 

2019 | Journal Article | LibreCat-ID: 22444
T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat
 

2019 | Conference Paper | LibreCat-ID: 22000
I. Gräßler and C. Oleff, “Risikoorientierte Analyse und Handhabung von Anforderungsänderungen,” in Design for X - Beiträge zum 30. DfX-Symposium , 2019, vol. 30, pp. 49–60.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22001
I. Gräßler, C. Oleff, and P. Scholle, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22002
I. Gräßler, H. Thiele, C. Oleff, P. Scholle, and V. Schulze, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in International Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat | DOI
 

2019 | Misc | LibreCat-ID: 16825
D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.
LibreCat
 

2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat | DOI
 

2019 | Book | LibreCat-ID: 22026
E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
LibreCat | DOI
 

2019 | Journal Article | LibreCat-ID: 36846
A. Kruse and M. Mummert, “Mit 3D-Druck umfassende Teilhabe möglich machen ,” Werkstatt:Dialog, no. 4, pp. 34–35, 2019.
LibreCat
 

2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat | Download (ext.)
 

2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat | DOI
 

2018 | Report | LibreCat-ID: 23736
A. Taube, S. Lammers, S. Urbanek, and R. Mrozek, Weichmagnetische Werkstoffe für die additive Fertigung von E-Motoren, vol. Heft 1286. Forschungsvereinigung Antriebstechnik e.V., 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22116
T. Schafran, B. Schramm, and L. Risse, “Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -,” in DVM - AK Implantate und Biostrukturen, 2018.
LibreCat
 

2018 | Journal Article | LibreCat-ID: 22117
B. Schramm, L. Risse, J. P. Brüggemann, H. A. Richard, and G. Kullmer, “Additive manufacturing for medical applications,” Journal of 3D Printing in medicine, vol. 2, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22118
L. Risse, B. Schramm, and T. Schafran, “Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen?,” in PreDay AK Fußchirurgie, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22120
C. Kummert and H.-J. Schmid, “The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering PA613 Build Part Properties,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22122
J. P. Brüggemann, L. Risse, A. Grübel, H. A. Richard, and G. Kullmer, “Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen,” in DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 250, pp. 89–98.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22125
A. Dsuban, J. Lohn, J. P. Brüggemann, and G. Kullmer, “Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 110–110.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22126
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 11–21.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22139
L. Risse, B. Schramm, J. P. Brüggemann, S. C. Woodcock, G. Kullmer, and H. A. Richard, “CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren,” in DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 89–100.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22145
T. D. Joy, J. P. Brüggemann, and G. Kullmer, “Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22147
J. P. Brüggemann, L. Risse, G. Kullmer, B. Schramm, and H. A. Richard, “Optimization of the fracture mechanical properties of additively manufactured EN AW-7075,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22148
J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, “Fracture mechanical investigations on selective laser melted TiAl6V4,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22150
L. Risse, B. Schramm, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–417.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22183 | OA
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat | Download (ext.)
 

2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22433
J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22434
J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22435
T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22436
A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat | DOI
 

2018 | Book | LibreCat-ID: 22506
U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21696
J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration into Existing Companies,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 14–31.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21991
I. Graessler, P. Scholle, J. Hentze, and C. Oleff, “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS,” in Proceedings of the DESIGN 2018 15th International Design Conference, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21998
I. Gräßler, P. Scholle, J. Hentze, and C. Oleff, “Semi-Automatized Assessment of Requirement Interrelations,” in 15th International Design Conference, 2018, vol. 15, p. S. 325-334.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21999
I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte,” in Design for X - Beiträge zum 29. DfX-Symposium, 2018, vol. 29, pp. 333–344, doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
 

2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Misc | LibreCat-ID: 6594
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 16039
D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22110
A. Taube, “Mechanische und mikrostrukturellen Eigenschaften additiv hergestellter Gitterstrukturen ,” in Hannover Messe Industrie, 2017, Hannover, 2017.
LibreCat
 

2017 | Book | LibreCat-ID: 22112
J. P. Brüggemann, L. Risse, A. Riemer, W. Reschetnik, G. Kullmer, and H. A. Richard, Entwicklung von Fahrradtretkurbelsystemen mittels additiver Fertigung. 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22119
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Methods for crack length measurement for the determination of fracture mechanical parameters of additive manufactured plastics,” in 14th International Conference on Fracture, 2017, vol. 14.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22127
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Risslängenmessung in additiv gefertigten Kunststoffproben auf Basis von Steifigkeitsänderungen infolge Ermüdungswachstum.,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, 2017, pp. 77–88.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22131
W. Reschetnik, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Bruchmechanische Charakterisierung von laserstrahlgeschmolzenen Werkstoffen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 147–156.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22133
J. P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenen Aluminium 7075,” in DVM - Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–20.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22134
L. Risse, J. P. Brüggemann, B. Schramm, G. Kullmer, and H. A. Richard, “Strukturoptimierung von Kurzschaft-Hüftendoprothesen durch den Einsatz der additiven Fertigung,” in DVM - Tagung - Zuverlässigkeit von Implataten und Biostrukturen, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22135
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Vergleich zweier Optimierungsstrategien am Beispiel additiv gefertigter Rennradvorbauten,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2017, pp. 49–66.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22136
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Konzepte zur Risslängenmessung an additive gefertigten Kunststoffen ,” in DVM Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 21–30.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22151
J. P. Brüggemann, L. Risse, B. Schramm, and H. A. Richard, “Entwicklung einer additiv gefertigten Fußorthese,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 26–37.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22153
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Crack length measurement of additive manufactured plastics based on the current potential drop method.,” in Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22165
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, vol. 68, no. 10, pp. 1028–1036, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 

2017 | Book | LibreCat-ID: 22419
T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21690
G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial Application of Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21691
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21692
A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies - selection of existing parts for increase of acceptance,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21694
J. Büsching and R. Koch, “Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2585–2596.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21695
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21697
G. Deppe and C. Lindemann, “Hybrid Manufacturing with Additive Manufacturing,” CECIMO Magazine, vol. 17, no. 11, pp. 28–29, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21704
T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach for industrializing AM technology - from part selection to test and verification,” Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 6559
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, “Additively manufactured acoustic diffuser structures for ultrasonic measurement applications,” in Proceedings of Meetings on Acoustics, 2017, p. 030004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16063
D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16074
D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,” presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16075
D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 

2016 | Dissertation | LibreCat-ID: 24774
A. Kloke, Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren, vol. 4. Düren: Shaker Verlag, 2016.
LibreCat | Download (ext.)
 

2016 | Dissertation | LibreCat-ID: 24897
S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, vol. 5. Düren: Düren Verlag GmbH, 2016.
LibreCat | Files available
 

2016 | Dissertation | LibreCat-ID: 26901
P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, vol. 6. 2016.
LibreCat
 

2016 | Report | LibreCat-ID: 23737
S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren, vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22107
J. P. Brüggemann, W. Reschetnik, H. A. Richard, G. Kullmer, and B. Schramm, “Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22109
W. Reschetnik, R. Grylls, B. Bauer, H. A. Richard, and G. Kullmer, “Fatigue Life Manipulation of SLM Parts,” 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22128
J. P. Brüggemann et al., “Optimierung von Fahrradtretkurbeln mittels additiver Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 101–112.
LibreCat
 

Filters and Search Terms

department=219

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed