Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

986 Publications


2017 | Dissertation | LibreCat-ID: 27664
Development of Novel Blends based on Rubber and in-situ Synthesized Polyurethane-urea
M. Tahir, Development of Novel Blends Based on Rubber and In-Situ Synthesized Polyurethane-Urea, 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27665
Steigerung der Zähigkeit von isotaktischem Polypropylen durch Kontrolle der Morphologie mittels 1,3,5-Benzoltrisamiden
M. Mörl, Steigerung Der Zähigkeit von Isotaktischem Polypropylen Durch Kontrolle Der Morphologie Mittels 1,3,5-Benzoltrisamiden, 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27666
Evaluierung neuer Fügetechnik für Organoblech-Hybridverbindungen
C. Budde , Evaluierung Neuer Fügetechnik Für Organoblech-Hybridverbindungen , 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27667
Beitrag zur Eigenschaftsverbesserung von Polyhydroxybutyrat (PHB)
L. Goebel , Beitrag Zur Eigenschaftsverbesserung von Polyhydroxybutyrat (PHB), 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27668
Functionalyzation of fiber composites with Nanoperticle-Modified resin systems
D. Abliz , Functionalyzation of Fiber Composites with Nanoperticle-Modified Resin Systems , 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27669
Beiträge zur Compoundierung von Wood-Plastic-Composites (WPC)
N. Böhm, Beiträge Zur Compoundierung von Wood-Plastic-Composites (WPC) , 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27670
Theoretische und experimentelle Untersuchungen zum Temperatur- und Durchsatzverhalten von Kautschukextrudern
S. Brockhaus, Theoretische Und Experimentelle Untersuchungen Zum Temperatur- Und Durchsatzverhalten von Kautschukextrudern, 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 27671
Weiterentwicklung Netzwerktheorie basierender Werkzeugauslegung
B. Jacobkersting, Weiterentwicklung Netzwerktheorie Basierender Werkzeugauslegung , 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 23904
Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel Research International (2017).
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 23909
Friction-Spinning – Possibility of Grain Structure Adjustment
B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 23910
A Rapid Heating Method for Press Hardening Processing
A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling
F. Knoop, T. Lieneke, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process
C. Schumacher, V. Schöppner, J. Guntermann, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 470–484.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling
F. Knoop, V. Schöppner, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 2757–2776.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik 1 (2017) 108–114.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16791
Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 15941
Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading
C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 15942
Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact
C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 15944
Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures (2017) 501–508.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16059
Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck, in: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 16062
Separation of Hybrid Structures for the Reclaim of their Single Components
S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017) 568–575.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16063
Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V
D. Ahlers, T. Tröster, in: 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16065
Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 16070
Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen
N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16071
Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen
Z. Wang, P. Kutz, T. Tröster, in: 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16072
Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH
N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16073
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16074
Materialkombinationen in der additive Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16075
Aspekte der Produktentwicklung in der additiven Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22038
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni, Micromachines 8 (2017).
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22033
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals & Materials Society (TMS) (2017) 563–568.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22023
Quality Improvement of FDM Parts by Parameter Optimization
F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the Polymer Processing Society, American Institute of Physics, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 27201
Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden
V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 37564
Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen
M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 19309
MULTIDIMENSIONAL STOCHASTIC MATERIAL MODELING AT LARGE DEFORMATIONS CONSIDERING PARAMETER CORRELATIONS
E. Penner, I. Caylak, R. Mahnken, in: Proceedings of the 2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2017), 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 19423
(n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES
R. Mahnken, C. Dammann, P. Lenz, International Journal for Multiscale Computational Engineering (2017) 295–322.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21710
Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing
C. Dammann, P. Lenz, R. Mahnken, Procedia CIRP (2017) 51–56.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 24521
Thermo-Mechanical Simulation of Hard Turning with Macroscopic Models
E. Uhlmann, R. Mahnken, I.M. Ivanov, C. Cheng, in: Lecture Notes in Production Engineering, Cham, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 27220
Investigation of Residual Stress in Laser Transmission Welding of Polypropylene
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, M. Schmidt, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 

2017 | Book | LibreCat-ID: 45108
Effective meso properties for fibre reinforced polymer curing
R. Mahnken, Effective Meso Properties for Fibre Reinforced Polymer Curing, 2017.
LibreCat | Download (ext.)
 

2017 | Conference Paper | LibreCat-ID: 16066
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 15961
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
LibreCat | DOI
 

2017 | Dissertation | LibreCat-ID: 16068
Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen
T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 25308
The enzyme-mediated autodeposition of casein: effect of enzyme immobilization on deposition of protein structures
A.A. Ruediger, W. Bremser, O.I. Strube, Journal of Coatings Technology and Research (2016) 597–611.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 25309
Nanoscaled Biocoatings via Enzyme Mediated Autodeposition of Casein
A.A. Ruediger, W. Bremser, O.I. Strube, Macromolecular Materials and Engineering (2016) 1181–1190.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 25310
Influences on the film thickness in the enzymatic autodeposition process of casein
A.A. Ruediger, E. Terborg, W. Bremser, O.I. Strube, Progress in Organic Coatings (2016) 56–61.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 25311
Enzyme-Mediated In Situ Synthesis and Deposition of Nonaggregated Melanin Protoparticles
O.I. Strube, A. Büngeler, W. Bremser, Macromolecular Materials and Engineering (2016) 801–804.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 27245
A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 27246
An Approach to Non-Destructive Testing of Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 27248
Auswirkungen von Betriebsparametern in der Heißluftvulkanisation
V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe (2016) 410–413.
LibreCat
 

Filters and Search Terms

department=321

Search

Filter Publications

Display / Sort

Export / Embed