Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
222 Publications
2022 | Conference Paper | LibreCat-ID: 33852 | 
Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.” In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 2011–18, 2022. https://doi.org/10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33853 |
Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.” In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 1844–58, 2022. https://doi.org/10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24760
Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile. Vol. 22. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Vol. 24. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
Moritzer, Elmar, Felix Hecker, and André Hirsch. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04 (2021): 30–32.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
Moritzer, Elmar, Felix Hecker, and André Hirsch. “Kleine Tropfen, große Wirkung.” Kunststoffe, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021.
LibreCat
| Download (ext.)