Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4806 Publications
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, S., Sextro, W., & Zuber, A. (2012). Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In 8. Tag des Fahrwerks, Aachen, 2012 (pp. 38–60). Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen.
LibreCat
2012 | Conference Paper | LibreCat-ID: 9788
Maeda, T., Bornmann, P., Hemsel, T., & Morita, T. (2012). Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics. In Ultrasonics Symposium (IUS), 2012 IEEE International (pp. 194–195). https://doi.org/10.1109/ULTSYM.2012.0048
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 9789
Maeda, T., Hemsel, T., & Morita, T. (2012). Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders. Japanese Journal of Applied Physics, 51, 09MD08. https://doi.org/10.1143/JJAP.51.09MD08
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , C., Meyer, T., Dorociak, R., Gausemeier, J., & Sextro, W. (2012). Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland.
LibreCat
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, M., Hemsel, T., & Sextro, W. (2012). Analysis of different operation modes for inertia motors. ACTUATOR 2012 Conference Proceedings, 761–764.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15888 | 
Somorovsky, J., Mayer, A., Schwenk, J., Kampmann, M., & Jensen, M. (2012). On Breaking SAML: Be Whoever You Want to Be. In Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12) (pp. 397–412). Bellevue, WA: {USENIX}.
LibreCat
| Download (ext.)
2012 | Journal Article | LibreCat-ID: 15981
Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., & Thöne, M. (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn, 15(15/2012), 30–38.
LibreCat
2012 | Journal Article | LibreCat-ID: 15983
Lauter, C., Werneke, S., Siewers, B., & Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design, 53–58. https://doi.org/10.1365/s35725-012-0079-2
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, C., Frantz, M., Kohler, J. P., & Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, C., Sarrazin, M., & Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal.
LibreCat
2012 | Journal Article | LibreCat-ID: 15989
Ickert, L., Thomas, D., Tröster, T., & Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244, (244).
LibreCat
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, C., Siewers, B., Zanft, B., & Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto .
LibreCat
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
LibreCat
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., Leuders, S., Tröster, T., & Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit.
LibreCat
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel.
LibreCat
2012 | Report | LibreCat-ID: 16012
Tröster, T., Marten, T., Adelbert, S., & Kadim, A. (2012). P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH.
LibreCat
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. 1st International Conference on Thermo-Mechanically Graded Materials, 1, 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. 5th International Conference on Polymer and Mould Innovations, 5, 266–272. https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616
LibreCat
| DOI