Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
1903 Publications
2014 | Journal Article | LibreCat-ID: 23767
Dettweiler, Yvonne, et al. “Schülerorientierte Einstiege in die Elektrochemie: Interaktionsboxen und ihre Möglichkeiten.” Praxis der Naturwissenschaften , vol. 63, no. 3, 2014, pp. 5–9.
LibreCat
2014 | Journal Article | LibreCat-ID: 23768
Fechner, Sabine, and Elke Sumfleth. “Auf dem Fußballrasen oder im Labor? Eine problemorientierte Experimentierbox zum Thema Neutralisation in zwei verschiedenen Kontexten.” Praxis der Naturwissenschaften, vol. 63, no. 6, 2014, pp. 32–34.
LibreCat
2014 | Journal Article | LibreCat-ID: 23769
Fechner, Sabine, and Bernhard Sieve. “Was wird von mir als Forscher in den Naturwissenschaften erwartet? Die ‘Forscherwoche’ als berufsorientierendes Angebot in den Schulferien.” Naturwissenschaften im Unterricht - Chemie, vol. 25, no. 140, 2014, pp. 45–48.
LibreCat
2014 | Journal Article | LibreCat-ID: 23834
Hüser, Nicole, and Eugeny Kenig. “A New Absorption-Desorption Pilot Plant for CO2 Capture.” Chemical Engineering Transactions, vol. 39, 2014, pp. 1417–22, doi:10.3303/CET1439237.
LibreCat
| DOI
2014 | Conference Abstract | LibreCat-ID: 23878
Hüser, Nicole, and Eugeny Kenig. Konzeption Und Validierung Einer Neuen Technikumsanlage Zur Absorption Und Desorption von CO2. Jahrestreffen der Fachgruppen Extraktion und Fluidverfahrenstechnik, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 20388
Plattner, K., et al. “Changes in Cortical Beta Activity Related to a Biceps Brachii Movement Task While Experiencing Exercise Induced Muscle Damage.” Physiol Behav, vol. 123, 2014, pp. 1–10, doi:10.1016/j.physbeh.2013.08.022.
LibreCat
| DOI
| PubMed | Europe PMC
2014 | Journal Article | LibreCat-ID: 2039
Krimphove, Dieter. “Grenzen Der Logik .” Rechtstheorie, no. Jg. 44, Dunker und Humblot, 2014, pp. 315 – 339.
LibreCat
2014 | Journal Article | LibreCat-ID: 20394
Plattner, K., et al. “The Response of Cortical Alpha Activity to Pain and Neuromuscular Changes Caused by Exercise-Induced Muscle Damage.” Scand J Med Sci Sports, vol. 24, no. 1, 2014, pp. 166–78, doi:10.1111/j.1600-0838.2012.01486.x.
LibreCat
| DOI
| PubMed | Europe PMC
2014 | Journal Article | LibreCat-ID: 20398
Needle, AR, et al. “Neuromechanical Coupling in the Regulation of Muscle Tone and Joint Stiffness.” Scand J Med Sci Sports, vol. 24, no. 5, 2014, pp. 737–48, doi:10.1111/sms.12181.
LibreCat
| DOI
| PubMed | Europe PMC
2014 | Journal Article | LibreCat-ID: 2040
Krimphove, Dieter. “Europas Meister – Der Konflikt Nationaler Berufsstandsregelungen Mit Den Europäischen Grundfreiheiten.” Wirtschaft Und Verwaltung – Themenheft Zum Gewerbearchiv , no. Heft 4, Gildenbuchverlag, 2014, pp. 234 – 250.
LibreCat
2014 | Conference Abstract | LibreCat-ID: 20633
Schubert, M., et al. Das Kortikale Abbild Sensomotorischer Kontrollprozesse - Grundlagen Zur Untersuchung Zentraler Ermüdung. Vol. 65, no. 7+8, 2014, p. 190.
LibreCat
2014 | Conference Abstract | LibreCat-ID: 20636
Jakobsmeyer, R., et al. Veränderte Drop Jump Performance Durch Ein Maximalkrafttraining Auf Instabilen Unterstützungsflächen. Vol. 66, no. 7+8, 2014, p. 230.
LibreCat
2014 | Journal Article | LibreCat-ID: 2087
Krimphove, Dieter, and Oliver Kruse. “Neue Regeln Zur Umsetzung Europäischer Normen.” Betriebswirtschaftliche Blätter , 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 2088
Krimphove, Dieter. “Rechtliche Unterstützung Für Studierwil-Lige Care-Leaver.” Careleaver Deutschland, no. http://www2.careleaver.de/?page_id=224, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20903
Priesterjahn, Claudia, et al. “Smarte Entwicklung Fuer Smarte Systeme: Softwareentwicklung Im Kontext Des Gesamtsystems.” Tagungsband Embedded Software Engineering Kongress 2014, 2014, pp. 619–27.
LibreCat
2014 | Journal Article | LibreCat-ID: 20904
Diedrich, Christian, et al. “Dienste in Der Automatisierungstechnik.” Atp Edition - Automatisierungstechnische Praxis, 2014, pp. 24–35.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20905
Pohlmann, Uwe, et al. “Generating Modelica Models from Software Specifications for the Simulation of Cyber-Physical Systems.” Proceedings of the 40th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), IEEE Xplore, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 20906
Fockel, Markus, et al. “Mit Satzmustern Hochwertige Anforderungsdokumente Effizient Erstellen.” OBJEKTspektrum, no. RE/2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20907
Becker, Steffen, et al. “The MechatronicUML Method: Model-Driven Software Engineering of Self-Adaptive Mechatronic Systems.” Proceedings of the 36th International Conference on Software Engineering (Posters), ACM, New York, NY, USA, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20908
Pohlmann, Uwe, et al. “A Modelica Coordination Pattern Library for Cyber-Physical Systems.” Proceedings of the 7th International ICST Conference on Simulation Tools and Techniques, 2014.
LibreCat
| Download (ext.)
2014 | Report | LibreCat-ID: 20909
Becker, Steffen, et al. The MechatronicUML Design Method - Process and Language for Platform-Independent Modeling. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20910
Pohlmann, Uwe, et al. “Viewpoints and Views in Hardware Platform Modeling for Safe Deployment.” Proceedings of the 2Nd Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling, ACM, New York, NY, USA, 2014, p. 23:23-23:30.
LibreCat
2014 | Conference Paper | LibreCat-ID: 20912
Kaiser, Lydia, et al. “Automatic Verification of Modeling Rules in Systems Engineering for Mechatronic Systems.” Volume 2B: 33rd Computers and Information in Engineering Conference, 2014, doi:10.1115/detc2013-12330.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 20924
Ebbert, Christoph, et al. “Spectroelectrochemical and Morphological Studies of the Ageing of Silver Nanoparticles Embedded in Ultra-Thin Perfluorinated Sputter Deposited Films.” Thin Solid Films, 2014, pp. 161–67, doi:10.1016/j.tsf.2014.10.054.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 17962 | 
Albers, Sönke, and Caren Sureth-Sloane. “Editorial: What Is and What Is Not a Substantial Contribution?” Business Research, vol. 5, no. 2, 2014.
LibreCat
| Download (ext.)
2014 | Bachelorsthesis | LibreCat-ID: 18001
Luo, Linghui. Ein Selbst-Stabilisierender Algorithmus Für Das Finite Sleep Problem in Skip+ Graphen. Universität Paderborn, 2014.
LibreCat
2014 | Bachelorsthesis | LibreCat-ID: 18002
Hinnenthal, Kristian. Formbildung Selbstorganisierender Partikelsysteme. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 1801
Wette, Philip, and Holger Karl. “Incorporating Feedback from Application Layer into Routing and Wavelength Assignment Algorithms.” 2013 IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS), IEEE, 2014, doi:10.1109/infcomw.2013.6970733.
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 18076
Kamin, A. M., et al. “Zur Konzeption einer digital unterstützten beruflichen Fortbildung – ein interdisziplinärer Ansatz aus Medienpädagogik und Pflegedidaktik.” Interdisziplinäre Zeitschrift für Technologie und Lernen. 1 (1), edited by A. Back et al., 2014, pp. 6–20.
LibreCat
2014 | Book Chapter | LibreCat-ID: 18077
Friedrichs, H., and Dorothee M. Meister. “Medienerziehung in der Kindertagesstätte.” Enzyklopädie Erziehungswissenschaft Online, edited by Dorothee M. Meister et al., Beltz Juventa, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 18078
Meise, B., et al. “Integrative Perspektiven auf Medien und Bildung zwischen Medienpädagogik und Medienwissenschaften.” Grundbildung Medien in pädagogischen Studiengängen, edited by P. Imort and H. Niesyto, kopaed, 2014, pp. 183–94.
LibreCat
2014 | Book Chapter | LibreCat-ID: 18079
Pöttinger, I., and Dorothee M. Meister. “School`s out? Informal and Formal Media Education - an International Perspective.” School`s out? Informelle Und Formelle Medienbildung , edited by S. Aßmann et al., kopaed, 2014, pp. 135–37.
LibreCat
2014 | Book Chapter | LibreCat-ID: 18080
Aßmann, S., et al. “School’s out? Informelle und formelle Medienbildung.” School`s out? Informelle und formelle Medienbildung , edited by S. Aßmann et al., kopaed, 2014, pp. 7–10.
LibreCat
2014 | Book Chapter | LibreCat-ID: 18471
Friedrich, Christoph, et al. “Spin Excitations in Solids from Many-Body Perturbation Theory.” First Principles Approaches to Spectroscopic Properties of Complex Materials, edited by Cristiana Di Valentin et al., vol. 347, Springer, 2014, pp. 259–301, doi:10.1007/128_2013_518.
LibreCat
| Files available
| DOI
| WoS
| PubMed | Europe PMC
2014 | Book Chapter | LibreCat-ID: 18472
Schindlmayr, Arno. “The GW Approximation for the Electronic Self-Energy.” Many-Electron Approaches in Physics, Chemistry and Mathematics, edited by Volker Bach and Luigi Delle Site, vol. 29, Springer, 2014, pp. 343–57, doi:10.1007/978-3-319-06379-9_19.
LibreCat
| Files available
| DOI
2014 | Journal Article | LibreCat-ID: 18473
Yanagisawa, Susumu, et al. “Theoretical Investigation of the Band Structure of Picene Single Crystals within the GW Approximation.” Japanese Journal of Applied Physics, vol. 53, no. 5S1, 05FY02, IOP Publishing and The Japan Society of Applied Physics, 2014, doi:10.7567/jjap.53.05fy02.
LibreCat
| Files available
| DOI
| WoS
2014 | Book Chapter | LibreCat-ID: 18474 |
Friedrich, Christoph, and Arno Schindlmayr. “Many-Body Perturbation Theory: The GW Approximation.” Computing Solids: Models, Ab Initio Methods and Supercomputing, edited by Stefan Blügel et al., vol. 74, Forschungszentrum Jülich, 2014, p. A4.1-A4.21.
LibreCat
| Files available
| Download (ext.)
2014 | Journal Article | LibreCat-ID: 1858
Jacob, Riko, et al. “SKIP*: A Self-Stabilizing Skip Graph.” J. ACM, no. 6, 2014, pp. 36:1--36:26, doi:10.1145/2629695.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 1863
Derakhshandeh, Zahra, et al. “Brief Announcement: Amoebot - a New Model for Programmable Matter.” 26th ACM Symposium on Parallelism in Algorithms and Architectures, SPAA’14, Prague, Czech Republic - June 23 - 25, 2014, ACM, 2014, pp. 220--222, doi:10.1145/2612669.2612712.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.” International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22382
Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules (LS).” ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering .
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22383
Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature Sizes and Geometrical Accuracies. 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 22384
Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22385
Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln Beim Lasersintern. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22386
Adam, Guido. Extension of Prior Developed Design Rules for Laser Sintering. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22387
Lessmeier, Christian, et al. “Data Acquisition and Signal Analysis from Measured Motor Currents for Defect Detection in Electromechanical Drive Systems.” European Conference of the PHM Society 2014 (EPHM14), Prognostics and Health Management Society , 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 22388
Klause, Alexander, and Detmar Zimmer. “Auswahl Anwendungsoptimaler Antriebssysteme Als Basis Für Die Komposition von Antriebsbaukästen.” Entwerfen - Entwickeln - Erleben 2014. Beiträge Zur Virtuellen Produktentwicklung Und Konstruktionstechnik, TUDpress Verlag der Wissenschaften GmbH, 2014, pp. 619–39.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22389
Strop, Malte, et al. “Intelligent Operating Strategies for Multi-Motor Drive Systems.” OPT-i 2014. 1st International Conference on Engineering and Applied Sciences Optimization, vol. 1, Institute of Structural Analyses and Antiseismic Research, 2014, pp. 626–63.
LibreCat
2014 | Journal Article | LibreCat-ID: 22390
Zimmer, Detmar, et al. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung , vol. 1, Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2014, pp. 7–9, doi:http://wigep.de/fileadmin/download/wigep/WiGeP_News_2014_1.pdf.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22391
Klause, Alexander, and Detmar Zimmer. “Konzeption von Antriebssystembaukästen Auf Der Basis von Branchenspezifischen Antriebslösungen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe , vol. 66, no. 5, Springer-VDI-Verlag , 2014, pp. 61&66.
LibreCat
2014 | Book | LibreCat-ID: 22392
Hölscher, Christian, and Detmar Zimmer. Intelligent Drive Module (IDM). Springer Verlag (Lecture Notes in Mechanical Engineering), 2014, pp. 33–36, doi:10.1007/978-3-642-45435-6.
LibreCat
| DOI
2014 | Book | LibreCat-ID: 22393
Hölscher, Christian, et al. Application of Self-Optimizing Systems. Springer Verlag (Lecture Notes in Mechanical Engineering), 2014, pp. 16–21, doi:10.1007/978-3-642-53742-4.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22683
Bald, Ilko, and Adrian Keller. “Molecular Processes Studied at a Single-Molecule Level Using DNA Origami Nanostructures and Atomic Force Microscopy.” Molecules, vol. 19, 2014, pp. 13803–23, doi:10.3390/molecules190913803.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22736
Arifulina, Svetlana, et al. “SeSAME: Modeling and Analyzing High-Quality Service Compositions.” {Proceedings of the 29th IEEE/ACM International Conference on Automated Software Engineering (ASE 2014)}, ACM, 2014, pp. 839–42, doi:10.1145/2642937.2648621.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22740
Becker, Matthias, et al. “Towards Systematic Configuration for Architecture Validation.” {Proceedings of the 40th Euromicro Conference on Software Engineering and Advanced Applications (SEAA) (Work in Progress Session)}, IEEE, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22741
Becker, Matthias, et al. “Cloud Computing Reduces Uncertainties in Quality-of-Service Matching!” {Proceedings of the 2nd International Workshop on Cloud Service Brokerage (CSB)}, Springer, 2014, pp. 153–59, doi:10.1007/978-3-319-14886-1_15.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22743
Knauss, Alessia, et al. “2.3 Artifact-Centric Requirements Engineering for Self-Adaptive Systems.” {Report from the GI Dagstuhl Seminar 14433: Software Engineering for Self-Adaptive Systems}, 2014, p. 7.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22744
Lehrig, Sebastian, and Matthias Becker. “Approaching the Cloud: Using Palladio for Scalability, Elasticity, and Efficiency Analyses.” {Proceedings of the Symposium on Software Performance (SOSP)}, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22903
Kühn, Arno, et al. “Feature Models Supporting Trade-off Decisions in Early Mechatronic Systems Design.” NordDesign 2014, Espoo, Finnland, 27. - 29. Aug. 2014, 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 22904
Gausemeier, Jürgen, et al. “Der Spitzencluster it’s OWL auf dem Weg zur Industrie 4.0.” ZWF - Zeitschrift für Wirtschaftlichen Fabrikbetrieb, 2014, pp. 336–46.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 22905
Mahadhir, Khairul Azmi, et al. “Terrain Classification for Track-Driven Agricultural Robots.” Procedia Technology, vol. Vol. 15, 2014, pp. 776–83.
LibreCat
2014 | Book Chapter | LibreCat-ID: 22906
Dorociak, Rafal, et al. “Specification Technique CONSENS for the Description of Self-Optimizing Systems.” Design Methodology for Intelligent Technichal Systems, edited by Jürgen Gausemeier et al., Springer, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22907
Kühn, Arno, et al. “Strategy Controlling for Innovation Clusters - the Example of ‘It’s OWL.’” ISPIM Conference 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22908
Dumitrescu, Roman, et al. “Systematische Berücksichtigung von Fertigungsanforderungen im Model-Based Systems Engineering.” Tag des Systems Engineering, Bremen, edited by Maik Maurer and Sven-Olaf Schulze, Carl Hanser Verlag, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22909
Rabe, Martin, et al. “Methodology for the Identification of Solution Patterns within Mechatronic Systems.” Proceedings of the 15th International Workshop on Research and Education in Mechatronics (REM), El Gouna, Egypt, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22910
Tschirner, Christian, et al. “Collaboration in Model-Based Systems Engineering Based on Application Scenarios.” NordDesign 2014, 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 22911
Jürgenhake, Christoph, et al. “Optimized Process Sequences for Prototyping of Molded Interconnect Devices.” Advanced Materials Research, vol. Vol.1038, 2014, pp. 19–27.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 22912
Schierbaum, Thomas, et al. “Method for the Identification and Comparison of Alternative Process Chains Focusing on Economics Efficiency Analysis during the Conceptual Design of Mechatronic Integrated Devices.” Advanced Materials Research, vol. Vol.1038, 2014, pp. 3–9.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23080
Frieben, Tanja, and Ansgar Trächtler. “Virtual Commissioning by Means of an Adaptive Selection of the Modeling Depth.” Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE14, Montreal, Québec, Canada, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23081
Kruse, Daniel, et al. “Methodology for a Partly Automated Parameter Identification for the Validation of Multi-Domain Models.” Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23082
Lochbichler, Matthias, et al. “Dynamic Behavior Models and Their Modeling Depth in the Design Process of Mechatronic Systems.” Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23083
Kromov, Ivan, et al. “Ansätze Zur Regelung Eines Elektronischen Lastemulators Für Die Hardware-in-the-Loop-Simulation von Antriebsreglern Auf Leistungsebene.” SPS IPC Drives, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23084
Shareef, Zeeshan, and Ansgar Trächtler. “Optimal Trajectory Planning for Robotic Manipulators Using Discrete Mechanics and Optimal Control.” Multi-Conference on Systems and Control (MSC) / 23rd Conference on Control Applications (CCA), IEEE, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23085
Damerow, Ulf-Hendrik, et al. “Analysis of High Speed Bending Operations as Basis for Integrating Self-Correcting Components to Increase Process Reliability.” Procedia Engineering 81, Elsevier, 2014, pp. 831–36.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23086
Krüger, Martin. “Parametrische Modellordnungsreduktion Für Hierarchische Selbstoptimierende Systeme.” Workshop GMA-Fachausschuss 1.30, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23087
Al Qaisi, Imad, et al. “Subjective Evaluation of Different Motion Cueing Algorithms Implemented on ATMOS Driving Simulator.” Driving Simulation Conference 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23088
Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus Coordination for Multiple Autonomous Intersection Management.” Tagungsband 9. Dortmunder AutoTag, Technische Universität Dortmund, 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 23089
Just, Viktor. Modellbasierte Analyse Und Regelungstechnische Maßnahmen Zur Optimierung Des Vereinzelungsvorgangs in Bankautomaten. Universitaetsbibliothek Paderborn, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23090
Wuthishuwong, Chairit, and Ansgar Trächtler. “Stability of the Consensus in the Network of Multiple Autonomous Intersections Management.” Proc. 20th International Conference on Automation and Computing (ICAC), IEEE, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 23091
Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and Trajectory Optimization for Robotic Manipulators Using Discrete Mechanics and Optimal Control.” Robotica, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23092
Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus Coordination in the Network of Autonomous Intersection Management.” Proc. 11th International Conference on Informatics in Control Automation and Robotics ICINCO, IEEE, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23093
Flottmeier, Sarah, et al. “Sliding Mode and Continuous Estimation Techniques for the Realization of Advanced Control Strategies for Parallel Kinematics .” Proceedings of the 19th IFAC World Congress, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23094
Kessler, Jan Henning, and Ansgar Trächtler. “Control of Pareto Points for Self-Optimizing Systems with Limited Objective Values.” The 19th IFAC World Congress, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23095
Shareef, Zeeshan, and Ansgar Trächtler. “Joint Selection Criterion for Optimal Trajectory Planning for Robotic Manipulators Using Dynamic Programming.” 19th IFAC World Congress, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23096
Pai, Arathi, et al. “Analyses of the Stress-Strain Behaviour of SMAs under Cyclical Loading Conditions – Implementation of a Novel Phenomenological Constitutive Model.” Posterbeitrag ICOMAT - International Conference on Martensitic Transformations, Juli 2014, Bilbao, Spanien, 2014.
LibreCat
2014 | Conference (Editor) | LibreCat-ID: 23097
Damerow, Ulf-Hendrik, et al., editors. Concept for a Self-Correcting Sheet Metal Bending Operation. Vol. Volume 15, Elsevier, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23098
Shareef, Zeeshan, et al. “Design and Control of a Vertical Ball Juggling Delta Robot without Visual Guidance.” 13th International Conference on Intelligent Autonomous Systems, Springer-Verlag, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23099
Abrishamchian, Farisoroosh, and Ansgar Trächtler. “Configuration of Mechatronic Systems Using Feature Models.” 2nd International Conference on System-Integrated Intelligence, Universität Bremen, 2014, pp. 27–34.
LibreCat
2014 | Conference (Editor) | LibreCat-ID: 23100
Schaermann, Waldemar, et al., editors. Selbstkorrigierende Biegeprozesse in Der Umformtechnik. VDI- Verlag, Düsseldorf, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23101
Kessler, Jan Henning, et al. “Continuous Objective-Based Control for Self-Optimizing Systems with Changing Operation Modes.” 13th European Control Conference (ECC), 2014, pp. 2096–102.
LibreCat
2014 | Book | LibreCat-ID: 23102
Gausemeier, Jürgen, et al. Semantische Technologien Im Entwurf Mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. Carl Hanser Verlag, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23103
Krüger, Martin, et al. “Model-Based Design of Self-Correcting Forming Processes.” KoMSO Challenge Workshop Math for the Digital Factory, 2014.
LibreCat
2014 | Conference (Editor) | LibreCat-ID: 23104
Borsig, Michael, and Ansgar Trächtler, editors. RAILCAB – THE INNOVATIVE PLATFORM FOR DESIGN AND TEST OF NEW RAILWAY TECHNOLOGIES. Moscow State University of Railway Engineering, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23105
Flottmeier, Sarah, et al. “Test Rig for the Hardware-in-the-Loop Simulation of Mechatronic Axles.” Proceedings of the 9th International Fluid Power Conference, vol. 3, 2014, pp. 366–77.
LibreCat
2014 | Conference Paper | LibreCat-ID: 23106
Oestersötebier, Felix, et al. “A Modelica Contact Library for Idealized Simulation of Independently Defined Contact Surfaces.” 10th International Modelica Conference, 2014.
LibreCat