Stefan Lammers

stefan.lammers@uni-paderborn.de
ID
13835

18 Publications

Mark all

[18]
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat | Download (ext.)
 
[17]
2023 | Conference Paper | LibreCat-ID: 46745
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.
LibreCat
 
[16]
2021 | Book Chapter | LibreCat-ID: 23734
S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 32799
T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 23880
S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion,” 2021.
LibreCat
 
[13]
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 
[12]
2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 
[11]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[10]
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[9]
2018 | Conference Paper | LibreCat-ID: 22433
J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat | DOI
 
[8]
2018 | Conference Paper | LibreCat-ID: 22434
J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat | DOI
 
[7]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[6]
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[5]
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[4]
2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 
[3]
2016 | Report | LibreCat-ID: 23737
S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren, vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 
[2]
2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

18 Publications

Mark all

[18]
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat | Download (ext.)
 
[17]
2023 | Conference Paper | LibreCat-ID: 46745
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.
LibreCat
 
[16]
2021 | Book Chapter | LibreCat-ID: 23734
S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 32799
T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 23880
S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion,” 2021.
LibreCat
 
[13]
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 
[12]
2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 
[11]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[10]
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[9]
2018 | Conference Paper | LibreCat-ID: 22433
J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat | DOI
 
[8]
2018 | Conference Paper | LibreCat-ID: 22434
J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat | DOI
 
[7]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[6]
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[5]
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[4]
2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 
[3]
2016 | Report | LibreCat-ID: 23737
S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren, vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 
[2]
2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed