18 Publications

Mark all

[18]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat | Download (ext.)
 
[17]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, Stefan, et al. Depiction of Support Structures in Technical Drawings. 2023.
LibreCat
 
[16]
2021 | Book Chapter | LibreCat-ID: 23734
Lammers, Stefan, et al. “Konstruktionsrichtlinien in der Produktentwicklung.” Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch et al., 2021.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, Tobias, et al. “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy.” 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , 2021, doi:http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, Stefan, et al. Development of a Method to Derive Design Guidelines for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion. 2021.
LibreCat
 
[13]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat | DOI
 
[12]
2019 | Conference Paper | LibreCat-ID: 22441
Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.” II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 
[11]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[10]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[9]
2018 | Conference Paper | LibreCat-ID: 22433
Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol. 14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
LibreCat | DOI
 
[8]
2018 | Conference Paper | LibreCat-ID: 22434
Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
LibreCat | DOI
 
[7]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[6]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[5]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[4]
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
LibreCat | DOI
 
[3]
2016 | Report | LibreCat-ID: 23737
Lammers, Stefan, et al. Machbarkeitsstudie 3D Druck Elektromotoren. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 
[2]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat | DOI
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

18 Publications

Mark all

[18]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat | Download (ext.)
 
[17]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, Stefan, et al. Depiction of Support Structures in Technical Drawings. 2023.
LibreCat
 
[16]
2021 | Book Chapter | LibreCat-ID: 23734
Lammers, Stefan, et al. “Konstruktionsrichtlinien in der Produktentwicklung.” Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch et al., 2021.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, Tobias, et al. “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy.” 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , 2021, doi:http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, Stefan, et al. Development of a Method to Derive Design Guidelines for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion. 2021.
LibreCat
 
[13]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat | DOI
 
[12]
2019 | Conference Paper | LibreCat-ID: 22441
Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.” II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 
[11]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[10]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[9]
2018 | Conference Paper | LibreCat-ID: 22433
Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol. 14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
LibreCat | DOI
 
[8]
2018 | Conference Paper | LibreCat-ID: 22434
Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
LibreCat | DOI
 
[7]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[6]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[5]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[4]
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
LibreCat | DOI
 
[3]
2016 | Report | LibreCat-ID: 23737
Lammers, Stefan, et al. Machbarkeitsstudie 3D Druck Elektromotoren. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 
[2]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat | DOI
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed