Microinverter testing update using high power modules: Efficiency, yield, and conformity to a new ”estimation formula” for variation of PV panel size

The market for microinverters is growing, especially in Europe. Driven by the strongly rising prices for electricity, many small photovoltaic energy systems are being installed. Since monitoring for these plants is often quite costly, their yields are often not logged. Since 2014, microinverters have been studied at the University of Paderborn. The investigations are divided into indoor and outdoor tests. In the indoor area conversion efficiencies as a function of load have been measured with high accuracy and ranked according to Euro- and CEC weightings. In the outdoor laboratory, the behavior in the real world is tested. Energy yields have been measured outdoors via identical and calibrated crystalline silicon PV modules. Here, the investigations were carried out with modules of the power of 215 Wp until the year 2020. Because of the increasing module power nowadays, modules with an output of 360 Wp are now being used. To assess the influence of PV module size, two extremes have been investigated: A rather small module with 215 Wp - as it has been used 10 years ago, and a brand-new module (2021) offering 360 Wp. Both types of modules contain 60 solar cells in series connection. Appling the low-power modules, the challenge for the different micro-inverters has been during weak-light conditions, using the high-power modules, some inverters temporarily reach their power limits and yield is reduced. A method using a reference configuration of inverter & module and a linear equation resulting in the actual yield, any module & inverter configuration can be characterized by just the two coefficients.