Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
34 Publications
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46745
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.
LibreCat
2021 | Conference Paper | LibreCat-ID: 32799
T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 23880
S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion,” 2021.
LibreCat
2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat
| DOI