Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4019 Publications
2019 | Conference Paper | LibreCat-ID: 22141
Brüggemann, J. P., et al. “Strukturoptimierung Durch Den Einsatz Des Laser-Strahlschmelzprozesses Zur Realitätsnäheren Erfassung von Fahrzeug-Lastdaten.” DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., vol. 404, 2019, pp. 69–82.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22144
Risse, L., et al. “Reconstruction of a Defective Finger Joint Surface and Development of an Adapted External Fixator.” Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–38.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.” Proceedings of the 16th Rapid.Tech Conference, 2019, doi:10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, Tobias, et al. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019, doi:https://www.euspen.eu/knowledge-base/AM19129.pdf.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis, vol. 6, Vogel Communications Groupe GmbH & Co. KG, 2019, pp. 24–26.
LibreCat
2019 | Dissertation | LibreCat-ID: 22500
Kriegel, Nils-Peter. Konzeption Eines Energieeffizienten Betätigungs- Und Haltesystems Für Eine Federkraftbremse. Shaker Verlag GmbH , 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22970
Biemelt, Patrick, et al. “Objective Evaluation of a Novel Filter-Based Motion Cueing Algorithm in Comparison to Optimization-Based Control in Interactive Driving Simulation.” Proceedings of the International Conference on Advances in System Simulation (SIMUL), IARIA, 2019.
LibreCat
2019 | Book Chapter | LibreCat-ID: 22971
Rüddenklau, Nico, et al. “Simulation-Based Lighting Function Development of High-Definition Headlamps.” 13th International Symposium on Automotive Lighting (ISAL), vol. 18, utzverlag GmbH, 2019, pp. 677–86.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22972
Mertin, Sven, et al. “Proof-of-Concept Einer Komplexen Co-Simulationsumgebung Für Einen Fahrsimulator Zur Untersuchung von Car2X-Kommunikations-Szenarien.” VDI/VDE AUTOREG 2019, VDI Verlag Düsseldorf, 2019, pp. 159–70.
LibreCat
2019 | Book Chapter | LibreCat-ID: 22973
Rüddenklau, Nico, et al. “Hardware-in-the-Loop Simulation of High-Definition Headlamp Systems.” VDI/VDE AUTOREG 2019, VDI- Verlag, Düsseldorf, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22974
Nareyko, Georgi, et al. “Model Predictive Control of an Active Roll Stabilization System.” VDI/VDE Fachtagung AUTOREG, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 22975
Gräler, Manuel, et al. “Assisted Setup of Forming Processes: Architecture for the Integration of Non-Adjustable Disturbances.” Procedia CIRP, vol. 81, 2019, pp. 1348–1353.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22976
Michael, Jan, et al. “Decentralized Energy Management for Smart Home System of Systems.” Syscon 2019 - The 13th Annual IEEE International Systems Conference, vol. 13, IEEE SYSCON, 2019, pp. 524–31.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22977
Schütz, Stefan, et al. “Regelung Kollaborativer Robotersysteme Zur Benutzerfreundlichen, Flexiblen Fertigung Kleiner Losgrößen Am Beispiel Eines Halbautomatischen Schweißvorgangs.” Fachtagung Mechatronik 2019, vol. 13, VDI Mechatronik, 2019, pp. 43–48.
LibreCat
2019 | Journal Article | LibreCat-ID: 22978
Riepold, Markus, et al. “Open-Loop Linearization for Piezoelectric Actuator with Inverse Hysteresis Model.” Vibroengineering PROCEDIA, vol. 22, 2019, pp. 47–52.
LibreCat
2019 | Journal Article | LibreCat-ID: 22979
Rüting, Arne Thorsten, et al. “Umsetzung Einer Echtzeitfähigen Modellprädiktiven Trajektorienplanung Für Eine Mehrachsige Hybridkinematik Auf Einer Industriesteuerung.” At-Automatisierungstechnik, vol. 67, no. 4, 2019, pp. 326–336.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22980
Traphöner, Phillip, et al. “Hardware-in-the-Loop Simulation for a Multiaxial Suspension Test Rig with a Nonlinear Spatial Vehicle Dynamics Model.” 8th IFAC Symposium on Mechatronic Systems, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22981
Traphöner, Phillip, et al. “Hardware-in-the-Loop-Simulation Einer Fahrzeugachse Mit Aktiver Wankstabilisierung Mithilfe Eines Hydraulischen Hexapoden.” 13. VDI/VDE Mechatronik-Tagung, VDI-Verlag, 2019, pp. 85–90.
LibreCat
2019 | Book Chapter | LibreCat-ID: 22982
Rüddenklau, Nico, et al. “Real-Time Lighting of High-Definition Headlamps for Night Driving Simulation.” IARIA SysMea, vol. 12, IARIA, 2019, pp. 72–88.
LibreCat