Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4249 Publications
2024 | Conference Paper | LibreCat-ID: 59245
Polyvianchuk, Andrii, et al. “Approach for Optimal Selection of Innovative Actions for Residential Heating Systems.” Chemical Engineering Transactions, vol. 114, 2024, pp. 667–72, doi:10.3303/CET24114112.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59243
Schöppner, Volker, et al. “Improvement in an Analytical Approach for Modeling the Melting Process in Single-Screw Extruders.” Polymers, vol. 16, no. 22, 2024, p. 3130, doi:10.3390/polym16223130.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 55638 | 
Devulapally, Deekshith Reddy, et al. “Non-Rotationally Symmetric Joints – Mechanisms and Load Bearing Capacity.” Materials Research Proceedings, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-183.
LibreCat
| DOI
| Download (ext.)
2024 | Journal Article | LibreCat-ID: 57699 |
Chalicheemalapalli Jayasankar, Deviprasad, et al. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” Metals, vol. 14, no. 12, 1353, MDPI AG, 2024, doi:10.3390/met14121353.
LibreCat
| DOI
| Download (ext.)
2024 | Conference Paper | LibreCat-ID: 49430
Kaiser, Maximilian Alexander, et al. “The New TISTRAQ Process: Solution Treatment with Rapid Quenching and Annealing for Ti-6Al-4V Sheet Metal Part Forming - Investigation on Heat Transfer Coefficient and Influence on Cooling Rates.” IOM3. Chapter 14: Forming, Machining & Joining [Version 1; Not Peer Reviewed], 2024, doi:doi.org/10.7490/f1000research.1119929.1.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 49437
Pfeffer, Nina, et al. “The New TISTRAQ Process: Solution Treatment with Rapid Quenching and Annealing for Ti-6Al-4V Sheet Metal Part Forming - the Effect of Processing Parameters on Microstructure and Mechanical Properties.” IOM3. Chapter 14: Forming, Machining & Joining [Version 1; Not Peer Reviewed], doi:https://doi.org/10.7490/f1000research.1119929.1.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59585
Friedlein, Johannes, et al. “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining.” Journal of Manufacturing and Materials Processing, vol. 8, no. 4, 157, MDPI AG, 2024, doi:10.3390/jmmp8040157.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 60106
Reschke, G., et al. “In-Situ Computed Tomography and Transient Dynamic Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, SAGE Publications, 2024, doi:10.1177/09544089241251646.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 60105
Borgert, T., et al. “In-Situ Computed Tomography Analysis of the Failure Mechanisms of Thermomechanically Manufactured Joints with Auxiliary Joining Element.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 238, no. 12, SAGE Publications, 2024, pp. 2299–306, doi:10.1177/14644207241232233.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 60107
Köhler, D., et al. “In-Situ CT of the Clinching Process – Influence of Settling Effects Due to Process Interruptions.” Materials Research Proceedings, vol. 41, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-187.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 57467
Lehnert, Dennis, et al. “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component.” Crystals, vol. 14, no. 11, 1001, MDPI AG, 2024, doi:10.3390/cryst14111001.
LibreCat
| Files available
| DOI
2023 | Conference Abstract | LibreCat-ID: 47626
Rüther, Moritz Johannes, et al. “Correlation between SLS-Powder Processability and Particle Properties .” PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, 2023, pp. 172–76.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48577
Henkenjohann, Mark, et al. “Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL.” 2023 International Conference on Unmanned Aircraft Systems (ICUAS), IEEE, 2023, doi:10.1109/icuas57906.2023.10156317.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48585
Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material.” Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity., edited by Katia Mocellin et al., vol. 3, Springer, 2023, pp. 64–71, doi:10.1007/978-3-031-41341-4_8.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46764 |
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University of Texas, 2023.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 44316
Rozo Vasquez, Julian, et al. Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L. 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, 2023, doi:10.14361/9783839463772-006.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48672
Schöppner, Volker, et al. Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
Schöppner, Volker, et al. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining Plastics, no. 17, 2023, pp. 20–27.
LibreCat