Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
1001 Publications
2008 | Conference Paper | LibreCat-ID: 22343
Gausemeier, Jürgen, et al. “Determination of Active Pattern during the Conceptual Design of Self-Optimizing Systems Demonstrated by an Air Gap Adjustment System.” International Conference on Systems Engineering, vol. 19, University of Nevada, 2008, pp. 474–79, doi:10.1109/ICSEng.2008.60.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 22344
Schmidt, Alexander, et al. “Dynamic Optimization of Track Sectioning in Mechatronic Systems for a Hybrid Planner.” IEEE International Conference on Mechatronics and Automation, vol. 5, 2008, pp. 797–802, doi:10.1109/ICMA.2008.4798859.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 22345
Henkler, Stefan, et al. “Development of Self-Optimizing Systems. Domain-Spanning and Domain-Specific Models Exemplified by an Air Gap Adjustment System for Autonomous Vehicles.” Computers and Information in Engineering Conference, Parts A and B, vol. 28, American Society of Mechanical Engineers, 2008, pp. 1411–21, doi:10.1115/DETC2008-49475.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 22346
Klöpper, Benjamin, et al. “Defining Plan Metrics for Multi-Agent Planning Within Mechatronic Systems.” Computers and Information in Engineering Conference, Parts A and B, vol. 28, American Society of Mechanical Engineers, 2008, pp. 47–56, doi:10.1115/DETC2008-49642.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 22347
Schmidt, Alexander, et al. “Using Enviromental Models Approximated by Fuzzy Identification for Hybrid Planning of Mechatronic Systems.” Computers and Information in Engineering Conference, Parts A and B, vol. 28, American Society of Mechanical Engineers, 2008, pp. 1125–33, doi:10.1115/DETC2008-49153.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 22348
Gausemeier, Jürgen, et al. “Proceedings for the Conceptual Design of Self-Optimizing Mechatronic Systems.” DESIGN 2008, International Design Conference, vol. 20, 2008.
LibreCat
2008 | Book | LibreCat-ID: 22349
Klöpper, Benjamin, et al. A Multi-Agent Planning Problem for the Coordination of Function Modules. W. V. Westfalia Druck GmbH , 2008, pp. 377–93.
LibreCat
2008 | Book | LibreCat-ID: 22350
Gausemeier, Jürgen, et al. Conceptual Design of Self-Optimizing Mechatronic Systems. W. V. Westfalia Druck GmbH , 2008, pp. 35–51.
LibreCat
2008 | Journal Article | LibreCat-ID: 23254
Osmic, Semir, and Ansgar Trächtler. “Flatness-Based Online Controller Reconfiguration.” 34th Annual Conference of the IEEE Industrial Electronics Society (IECON 2008), IEEE IES, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23255
Zeineldin, Tarek. “Modeling the Process of Drying Stationary Objects inside a Tumble Dryer Using COMSOL Multiphysics.” COMSOL Conference 2008, 2008.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23256
Münch, Eckehard, et al. “Hybrid Planning and Hierarchical Optimization of Mechatronic Systems.” Proceedings of the International Conference on Control, Automation and Systems (ICCAS), 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23257
Nachtigal, Vitalij, et al. “Development and Control of a Quarter-Vehicle Testbed for a Fully Active X-by-Wire Demonstrator.” 9th International Symposium on Advanced Vehicle Control (AVEC 2008), 2008.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23258
Henke, Christian, et al. “Organization and Control of Autonomous Railway Convoys.” Proceedings of the 9th International Symposium on Advanced Vehicle Control, Kobe, Japan, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23259
Voecking, Henner, and Ansgar Trächtler. “Self-Optimization of an Active Suspension System Regarding Energy Requirements.” International Conference on Control, Automation and Systems 2008 (ICCAS), 2008, pp. 14–17.
LibreCat
2008 | Journal Article | LibreCat-ID: 23260
Illg, Igor, et al. “Mechatronic Design and Implementation of an Active Suspension for an All-Terrain Tracked Vehicle.” 9th International Symposium on Advanced Vehicle Control (AVEC 2008), 2008.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23261
Just, Viktor, et al. “Model-Based Controller Design for the Paper Separation-Process in Automatic Teller Machines.” The 9th International Conference on Motion and Vibration Control (Movic 2008), Technische Universität München, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23262
Klöpper, Benjamin, et al. “Defining Plan Metrics for Multi-Agent Planning within Mechatronic Systems.” ASME 2008 - International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE), 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23263
Sondermann-Wölke, Christoph, et al. “The Active Guidance Module of a Rail-Bound Vehicle as an Application of Dependability Oriented Design in Self-Optimizing Systems.” ASME 2008 - International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE), 2008.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23264
Geisler, Jens, et al. “Multiobjective Optimization of Control Trajectories for the Guidance of a Rail-Bound Vehicle.” Proc. 17th IFAC World Congress, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23265
Burmester, Sven, et al. “Tool Support for the Design of Self-Optimizing Mechatronic Multi-Agent Systems.” International Journal on Software Tools for Technology Transfer (STTT), 2008, pp. 207–22.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23266
Henke, Christian, et al. “System Architecture and Risk Management for Autonomous Railway Convoys.” Proceedings of the 2nd Annual IEEE International Systems Conference, Montreal, Canada, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23268
Oberthür, Simon, et al. “Improved Flexible Resource Management by Means of Look-Ahead Scheduling and Bayesian Forecasting .” 7th International Heinz Nixdorf Symposium: Self-Optimizing Mechatronic Systems: Designing the Future, 2008, pp. 361–76.
LibreCat
2008 | Journal Article | LibreCat-ID: 23269
Bruns, Torsten, and Ansgar Trächtler. “Autonomes Kreuzungsmanagement Für Kraftfahrzeuge - Trajektorienplanung Mittels Dynamischer Programmierung.” 4. VDI/VDE-Fachtagung Zur Steuerung Und Regelung von Fahrzeugen Und Motoren (AUTOREG 2008), 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23270
Geisler, Jens, et al. “Self-Optimization of the Guidance Module of a Rail-Bound Vehicle.” 7th International Heinz Nixdorf Symposium: Self-Optimizing Mechatronic Systems: Designing the Future, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23271
Osmic, Semir, et al. “Safe Online-Reconfiguration of Self-Optimizing Mechatronic Systems .” 7th International Heinz Nixdorf Symposium: Self-Optimizing Mechatronic Systems: Designing the Future, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23272
Wielenberg, Andreas, et al. “Modellbasierte Entwicklung Eines Volltragenden, Vollaktiven Federungssystems Für Ein Geländegängiges Nutzfahrzeug.” 4. VDI/VDE-Fachtagung Zur Steuerung Und Regelung von Fahrzeugen Und Motoren (AUTOREG 2008), 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23273
Klöpper, Benjamin, et al. “A Multi-Agent Planning Problem for the Coordination of Function Modules .” 7th International Heinz Nixdorf Symposium: Self-Optimizing Mechatronic Systems: Designing the Future, 2008, pp. 377–93.
LibreCat
2008 | Conference Paper | LibreCat-ID: 23274
Münch, Eckehard, et al. “FPGA-in-the-Loop Simulations with CAMEL-View.” In Proceedings of the 7th International Heinz Nixdorf Symposium, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 23275
Schäfer, Erika, et al. “Modellbildung, Analyse Und Regelung Eines Aktiv Gefederten Fahrzeugs.” 4. VDI/VDE-Fachtagung Zur Steuerung Und Regelung von Fahrzeugen Und Motoren (AUTOREG 2008), 2008, p. 409.
LibreCat
2008 | Journal Article | LibreCat-ID: 23276
Poddubny, Wladimir, et al. “Definition of Optimum Parameters of Elastic Support of the Electric Motor of a Drive of a Wheel for Improvement of Dynamics of the Wheel Machine.” Мехатроника, Автоматизация, Управление (Mechatronik, Automatisierung, Regelung), vol. 5, 2008, pp. 42–44.
LibreCat
2008 | Conference Paper | LibreCat-ID: 21775
Domik, Gitta, et al. “What Can We Gain from Transdisciplinary Visualization Courses?” Eurographics 2008 - Education Papers, Crete, Greece, April 14-18, 2008, edited by Steve Cunningham and Lars Kjelldahl, Eurographics Association, 2008, pp. 21–24, doi:10.2312/eged.20081003.
LibreCat
| DOI
2008 | Book Chapter | LibreCat-ID: 21913
Rumlich, Dominik. “Learning English - the Reading Performance of a Japanese ‘SUE’ (Successful User of English).” Working Papers in Applied Linguistics, edited by Lucy Campbell, 2008, pp. 25–34.
LibreCat
2008 | Conference Paper | LibreCat-ID: 9568
Bo, Fu, et al. “A Simple Pre-Stress Estimating Method of Langevin Transducers.” Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium On, 2008, pp. 324–27, doi:10.1109/SPAWDA.2008.4775801.
LibreCat
| DOI
2008 | Journal Article | LibreCat-ID: 9569
Lierke, Ernst-Günter, and Tobias Hemsel. “Local Ultrasonic Hyperthermia and Thermo-Ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours.” Acta Acustica United with Acustica, vol. 94, no. 3, 2008, pp. 369–81, doi:10.3813/AAA.918044.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 9570
Müller, Thomas, et al. “Verlässlichkeitorientierte Technologiebewertung Innovativer Aktortechnologien Am Beispiel von Formgedächtnislegierungen.” 2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz, 2008.
LibreCat
2008 | Journal Article | LibreCat-ID: 9571
Mracek, Maik, et al. “Driving Concepts for Bundled Ultrasonic Linear Motors.” Journal of Electroceramics, vol. 20, no. 3–4, Springer US, 2008, pp. 153–58, doi:10.1007/s10832-007-9123-5.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 7994
Assmann, Martin, and Gregor Engels. “Service-Oriented Enterprise Architectures: Evolution of Concepts and Methods.” Proc. of the 12th IEEE International Enterprise Distributed Object Computing Conference 2008 (EDOC 08), Munich (Germany), IEEE Computer Society, 2008, pp. xxxiv–xliii, doi:https://groups.uni-paderborn.de/fg-engels/Publications/10.1109/EDOC.2008.48.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 7995
Assmann, Martin, and Gregor Engels. “Transition to Service-Oriented Enterprise Architecture.” Proceedings of the Second European Conference on Software Architecture (ECSA 2008), Paphos (Cyprus), vol. 5292, Springer, 2008, pp. 346–49, doi:http://dx.doi.org/10.1007/978-3-540-88030-1_34.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 7996
Salger, Frank, et al. “Comprehensive Architecture Evaluation and Management in Large Software-Systems.” Quality of Software Architectures. Models and Architectures, vol. 5281, Springer, 2008, pp. 205–19, doi:http://dx.doi.org/10.1007/978-3-540-87879-7_13.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 7997
Engels, Gregor, and Markus Voß. “Quasar Enterprise - Anwendungslandschaften Serviceorientiert Gestalten.” Software Engineering 2008. Fachtagung Des GI-Fachbereichs Softwaretechnik, vol. 121, Gesellschaft für Informatik (GI), 2008, pp. 24–27.
LibreCat
2008 | Conference Paper | LibreCat-ID: 7998
Küster, Jochen, et al. “Detecting and Resolving Process Model Differences in the Absence of a Change Log.” Proceedings of the 6th International Conference on Business Process Management (BPM’08), vol. 5240, Springer, 2008, pp. 244–60, doi:http://dx.doi.org/10.1007/978-3-540-85758-7_19.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 7999
Engels, Gregor, et al. “A Method for Engineering a True Service-Oriented Architecture.” Proceedings of the Tenth International Conference on Enterprise Information Systems (ICEIS 2008), Barcelona (Spain), vol. ISAS-2, Springer, 2008, pp. 272–81.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8000
Frohnhoff, Stephan, and Gregor Engels. “Revised Use Case Point Method - Effort Estimation in Development Projects for Business Applications.” Setting Quality Standards, Proceedings of the 11th International Conference on Quality Engineering in Software Technology (CONQUEST 2008), Potsdam (Germany), dpunkt Verlag, 2008, pp. 15–32.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8001
Mlynarski, Michael. “Qualitätssicherung Im Business Process Modeling Durch Automatische Ableitung Visueller Kontrakte Aus Heterogenen UML-Modellen.” Informatiktage 2008. Fachwissenschaftlicher Informatik-Kongress, 14. Und 15. März 2008, B-IT Bonn-Aachen International Center for Information Technology in Bonn, Gesellschaft für Informatik (GI), 2008, pp. 87–90.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8002
Koehler, Jana, et al. “Combining Quality Assurance and Model Transformations in Business-Driven Development.” Proceedings of the 3rd International Symposium on Applications of Graph Transformations with Industrial Relevance 2007 (AGTIVE ’07), Kassel (Germany), vol. 5088, Springer, 2008, pp. 1–16, doi:http://dx.doi.org/10.1007/978-3-540-89020-1_1.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 8003
Voigt, Hendrik, and Gregor Engels. “Kontextsensitive Qualitätsplanung Für Software-Modelle.” Proceedings of Modellierung (2008), Berlin (Germany), vol. 127, Gesellschaft für Informatik (GI), 2008, pp. 165–80.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8004
Voigt, Hendrik, and Gregor Engels. “Ein Verfeinerter GQM-Ansatz Zur Qualitätsbewertung von Software-Modellen.” Proceedings of Software-Qualitätsmodellierung Und -Bewertung (SQMB ’08), München, Germany, Technische Universität München, 2008, pp. 39–46.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8005
Voigt, Hendrik, et al. “Quality Plans for Measuring the Testability of Models.” Proceedings of the 11th International Conference on Quality Engineering in Software Technology (CONQUEST 2008), Potsdam (Germany), dpunkt.verlag, 2008, pp. 353–70.
LibreCat
2008 | Conference Paper | LibreCat-ID: 8006
Voigt, Hendrik, and Thomas Ruhroth. “A Quality Circle Tool for Software Models.” Proceedings of the 27th International Conference on Conceptual Modeling (ER 2008), Barcelona, Spain, vol. 5231, Springer, 2008, pp. 526–27, doi:http://dx.doi.org/10.1007/978-3-540-87877-3_44.
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 8007
Wahler, Michael, and Jochen Küster. “Predicting Coupling of Object-Centric Business Process Implementations.” Proceedings of the 6th International Conference on Business Process Management, vol. 5240, Springer, 2008, pp. 148–63, doi:http://dx.doi.org/10.1007/978-3-540-85758-7.
LibreCat
| DOI