Mortaza Otroshi

mortaza.otroshi@lwf.uni-paderborn.de
ID
71269

23 Publications

Mark all

[23]
2023 | Conference Paper | LibreCat-ID: 36839
S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “Mechanically Joined Extrusion Profiles for Battery Trays.”
LibreCat
 
[22]
2022 | Journal Article | LibreCat-ID: 27186
M. Otroshi and G. Meschut, “Influence of cutting clearance and punch geometry on the stress state in small punch test ,” Engineering Failure Analysis, vol. 136, no. c, 2022, doi: 10.1016/j.engfailanal.2022.106183.
LibreCat | DOI
 
[21]
2022 | Conference Paper | LibreCat-ID: 34152
M. Otroshi and G. Meschut, “Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung,” presented at the 12. Kolloquium Gemeinsame Forschung zur Mechanischen Fügetechnik, Rostock, 2022.
LibreCat
 
[20]
2022 | Conference Abstract | LibreCat-ID: 34153
M. Otroshi and G. Meschut, “Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen,” 2022.
LibreCat
 
[19]
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[18]
2022 | Dissertation | LibreCat-ID: 33499
M. Otroshi, Damage modeling in the numerical simulation of mechanical joining processes. Shaker Verlag, 2022.
LibreCat | DOI
 
[17]
2022 | Conference Abstract | LibreCat-ID: 30123
M. Otroshi and G. Meschut, “Investigation of the three-dimensional stress state during loading of self-piercing riveted joints,” presented at the Materials Science & Technology (MS&T22), Pittsburg, Pennsylvania, USA.
LibreCat
 
[16]
2022 | Conference Paper | LibreCat-ID: 36838
S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.
LibreCat
 
[15]
2022 | Journal Article | LibreCat-ID: 30963
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 21280
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Simulationsbasierte Lebensdauerabschätzung einer stanzgenieteten Fügeverbindung unter zyklischer Belastung,” presented at the 4. Symposium Materialtechnik, 2021.
LibreCat
 
[13]
2021 | Journal Article | LibreCat-ID: 25476 | OA
M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed steels,” Journal of Manufacturing Engineering, vol. 16, no. 3, pp. 70–76, 2021, doi: https://doi.org/10.37255/jme.v16i3pp070-076.
LibreCat | DOI | Download (ext.)
 
[12]
2021 | Journal Article | LibreCat-ID: 21810
M. Otroshi, G. Meschut, C. R. Bielak, L. Masendorf, and A. Esderts, “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components,” Key Engineering Materials, vol. 883, pp. 35–40, 2021, doi: https://doi.org/10.4028/www.scientific.net/KEM.883.35.
LibreCat | DOI
 
[11]
2021 | Journal Article | LibreCat-ID: 21545 | OA
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Service life estimation of self‐piercing riveted joints by linear damage accumulation,” Fatigue & Fracture of Engineering Materials & Structures, p. 15, 2021, doi: 10.1111/ffe.13446.
LibreCat | DOI | Download (ext.)
 
[10]
2020 | Report | LibreCat-ID: 20145
M. Otroshi and G. Meschut, Methodenentwicklung zur Schädigungsmodellierung für die numerische Prozesssimulation mechanischer Fügeverfahren. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2020.
LibreCat | Files available | Download (ext.)
 
[9]
2020 | Conference Paper | LibreCat-ID: 20146
L. Masendorf, M. Wächter, S. Horstmann, M. Otroshi, A. Esderts, and G. Meschut, “Linear damage accumulation of self-pierce riveted joints,” presented at the Fourth International Conference on Material and Component Performance under Variable Amplitude Loading, Darmstadt, Germany, 2020.
LibreCat
 
[8]
2020 | Journal Article | LibreCat-ID: 20170 | OA
M. Otroshi and G. Meschut, “Spannungszustandsabhängige Schädigungsmodellierung zum Halbhohlstanznieten,” Umformtechnik Blech Rohre Profile, no. 7/20, pp. 48–50, 2020.
LibreCat | Files available | Download (ext.)
 
[7]
2020 | Report | LibreCat-ID: 21152
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2020.
LibreCat | Files available | Download (ext.)
 
[6]
2020 | Conference Abstract | LibreCat-ID: 20567
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, “Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium , Rostock, Germany, 2020.
LibreCat
 
[5]
2020 | Journal Article | LibreCat-ID: 20143 | OA
M. Otroshi, M. Rossel, and G. Meschut, “Stress state dependent damage modeling of self-pierce riveting process simulation using GISSMO damage model,” Journal of Advanced Joining Processes, vol. 1, 2020, doi: 10.1016/j.jajp.2020.100015.
LibreCat | DOI | Download (ext.)
 
[4]
2019 | Conference Paper | LibreCat-ID: 20147
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, “Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile.” Europäische Forschungsgesellschaft für Blechverarbeitung e.V., pp. 75–80, 2019.
LibreCat
 
[3]
2019 | Conference Paper | LibreCat-ID: 20149
L. Masendorf, M. Wächter, A. Esderts, S. Horstmann, M. Otroshi, and G. Meschut, “Experimentelle Ermittlung von Eingangsdaten für eine simulationsbasierte Lebensdauerabschätzung halbhohlstanzgenieteter Bauteile,” presented at the Werkstoffe und Bauteile auf dem Prüfstand, Neu-Ulm, Germany, 2019.
LibreCat
 
[2]
2019 | Conference Paper | LibreCat-ID: 20152
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, S. Horstmann, and G. Meschut, “Erstellung eines Simulationsmodells für die Lebensdauerabschätzung halbhohlstanzgenieteter Bauteile unter zyklischer Belastung,” presented at the 37. CADFEM ANSYS Simulation Conference, Kassel, Germany, 2019.
LibreCat
 
[1]
2015 | Conference Paper | LibreCat-ID: 20153
M. Kaveh, J. Pourmohammad, M. Hassanalian, M. Nili Ahmadabadi, and M. Otroshi, “Optimized method in sizing of Flapping Wing,” presented at the International Micro Air Vehicles Conference and Flight Competition IMAV, Aachen, Germany, 2015.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

23 Publications

Mark all

[23]
2023 | Conference Paper | LibreCat-ID: 36839
S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “Mechanically Joined Extrusion Profiles for Battery Trays.”
LibreCat
 
[22]
2022 | Journal Article | LibreCat-ID: 27186
M. Otroshi and G. Meschut, “Influence of cutting clearance and punch geometry on the stress state in small punch test ,” Engineering Failure Analysis, vol. 136, no. c, 2022, doi: 10.1016/j.engfailanal.2022.106183.
LibreCat | DOI
 
[21]
2022 | Conference Paper | LibreCat-ID: 34152
M. Otroshi and G. Meschut, “Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung,” presented at the 12. Kolloquium Gemeinsame Forschung zur Mechanischen Fügetechnik, Rostock, 2022.
LibreCat
 
[20]
2022 | Conference Abstract | LibreCat-ID: 34153
M. Otroshi and G. Meschut, “Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen,” 2022.
LibreCat
 
[19]
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[18]
2022 | Dissertation | LibreCat-ID: 33499
M. Otroshi, Damage modeling in the numerical simulation of mechanical joining processes. Shaker Verlag, 2022.
LibreCat | DOI
 
[17]
2022 | Conference Abstract | LibreCat-ID: 30123
M. Otroshi and G. Meschut, “Investigation of the three-dimensional stress state during loading of self-piercing riveted joints,” presented at the Materials Science & Technology (MS&T22), Pittsburg, Pennsylvania, USA.
LibreCat
 
[16]
2022 | Conference Paper | LibreCat-ID: 36838
S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya, “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.
LibreCat
 
[15]
2022 | Journal Article | LibreCat-ID: 30963
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[14]
2021 | Conference Paper | LibreCat-ID: 21280
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Simulationsbasierte Lebensdauerabschätzung einer stanzgenieteten Fügeverbindung unter zyklischer Belastung,” presented at the 4. Symposium Materialtechnik, 2021.
LibreCat
 
[13]
2021 | Journal Article | LibreCat-ID: 25476 | OA
M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed steels,” Journal of Manufacturing Engineering, vol. 16, no. 3, pp. 70–76, 2021, doi: https://doi.org/10.37255/jme.v16i3pp070-076.
LibreCat | DOI | Download (ext.)
 
[12]
2021 | Journal Article | LibreCat-ID: 21810
M. Otroshi, G. Meschut, C. R. Bielak, L. Masendorf, and A. Esderts, “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components,” Key Engineering Materials, vol. 883, pp. 35–40, 2021, doi: https://doi.org/10.4028/www.scientific.net/KEM.883.35.
LibreCat | DOI
 
[11]
2021 | Journal Article | LibreCat-ID: 21545 | OA
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Service life estimation of self‐piercing riveted joints by linear damage accumulation,” Fatigue & Fracture of Engineering Materials & Structures, p. 15, 2021, doi: 10.1111/ffe.13446.
LibreCat | DOI | Download (ext.)
 
[10]
2020 | Report | LibreCat-ID: 20145
M. Otroshi and G. Meschut, Methodenentwicklung zur Schädigungsmodellierung für die numerische Prozesssimulation mechanischer Fügeverfahren. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2020.
LibreCat | Files available | Download (ext.)
 
[9]
2020 | Conference Paper | LibreCat-ID: 20146
L. Masendorf, M. Wächter, S. Horstmann, M. Otroshi, A. Esderts, and G. Meschut, “Linear damage accumulation of self-pierce riveted joints,” presented at the Fourth International Conference on Material and Component Performance under Variable Amplitude Loading, Darmstadt, Germany, 2020.
LibreCat
 
[8]
2020 | Journal Article | LibreCat-ID: 20170 | OA
M. Otroshi and G. Meschut, “Spannungszustandsabhängige Schädigungsmodellierung zum Halbhohlstanznieten,” Umformtechnik Blech Rohre Profile, no. 7/20, pp. 48–50, 2020.
LibreCat | Files available | Download (ext.)
 
[7]
2020 | Report | LibreCat-ID: 21152
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2020.
LibreCat | Files available | Download (ext.)
 
[6]
2020 | Conference Abstract | LibreCat-ID: 20567
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, “Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium , Rostock, Germany, 2020.
LibreCat
 
[5]
2020 | Journal Article | LibreCat-ID: 20143 | OA
M. Otroshi, M. Rossel, and G. Meschut, “Stress state dependent damage modeling of self-pierce riveting process simulation using GISSMO damage model,” Journal of Advanced Joining Processes, vol. 1, 2020, doi: 10.1016/j.jajp.2020.100015.
LibreCat | DOI | Download (ext.)
 
[4]
2019 | Conference Paper | LibreCat-ID: 20147
M. Otroshi, G. Meschut, L. Masendorf, and A. Esderts, “Simulationsbasierte Betriebsfestigkeitsanalyse stanzgenieteter Bauteile.” Europäische Forschungsgesellschaft für Blechverarbeitung e.V., pp. 75–80, 2019.
LibreCat
 
[3]
2019 | Conference Paper | LibreCat-ID: 20149
L. Masendorf, M. Wächter, A. Esderts, S. Horstmann, M. Otroshi, and G. Meschut, “Experimentelle Ermittlung von Eingangsdaten für eine simulationsbasierte Lebensdauerabschätzung halbhohlstanzgenieteter Bauteile,” presented at the Werkstoffe und Bauteile auf dem Prüfstand, Neu-Ulm, Germany, 2019.
LibreCat
 
[2]
2019 | Conference Paper | LibreCat-ID: 20152
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, S. Horstmann, and G. Meschut, “Erstellung eines Simulationsmodells für die Lebensdauerabschätzung halbhohlstanzgenieteter Bauteile unter zyklischer Belastung,” presented at the 37. CADFEM ANSYS Simulation Conference, Kassel, Germany, 2019.
LibreCat
 
[1]
2015 | Conference Paper | LibreCat-ID: 20153
M. Kaveh, J. Pourmohammad, M. Hassanalian, M. Nili Ahmadabadi, and M. Otroshi, “Optimized method in sizing of Flapping Wing,” presented at the International Micro Air Vehicles Conference and Flight Competition IMAV, Aachen, Germany, 2015.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed