Sven Helge Klippstein
Partikelverfahrenstechnik (PVT)
Direct Manufacturing Research Center (DMRC) – Academic
Direct Manufacturing Research Center (DMRC) (bis 2022)
helge.klippstein@dmrc.deID
18 Publications
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43046 | 
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 30229
S. H. Klippstein, “Reproducibility in Polymer Laser Sintering,” presented at the Public Science Session of the DMRC Technical Meeting Feb 2022, Online, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 33355
S. H. Klippstein, “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung,” presented at the AM Forum Berlin, Berlin, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 33695
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 31871
I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 30227
S. H. Klippstein, “Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse,” presented at the Rudolstädter Kunststofftage 2021, Tudolstadt, 2021.
LibreCat
| Files available
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 17835
S. H. Klippstein, H. Hassanin, A. Diaz De Cerio Sanchez, Y. Zweiri, and L. Seneviratne, “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications,” Advanced Engineering Materials, vol. 20, no. 2, Art. no. 1800290, 2018, doi: 10.1002/adem.201800290.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16252
S. H. Klippstein, A. Diaz De Cerio Sanchez, H. Hassanin, Y. Zweiri, and L. Seneviratne, “Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review,” Advanced Engineering Materials, Art. no. 1700552, 2017, doi: 10.1002/adem.201700552.
LibreCat
| DOI
18 Publications
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43046 |
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 30229
S. H. Klippstein, “Reproducibility in Polymer Laser Sintering,” presented at the Public Science Session of the DMRC Technical Meeting Feb 2022, Online, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 33355
S. H. Klippstein, “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung,” presented at the AM Forum Berlin, Berlin, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 33695
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 31871
I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 30227
S. H. Klippstein, “Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse,” presented at the Rudolstädter Kunststofftage 2021, Tudolstadt, 2021.
LibreCat
| Files available
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 17835
S. H. Klippstein, H. Hassanin, A. Diaz De Cerio Sanchez, Y. Zweiri, and L. Seneviratne, “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications,” Advanced Engineering Materials, vol. 20, no. 2, Art. no. 1800290, 2018, doi: 10.1002/adem.201800290.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16252
S. H. Klippstein, A. Diaz De Cerio Sanchez, H. Hassanin, Y. Zweiri, and L. Seneviratne, “Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review,” Advanced Engineering Materials, Art. no. 1700552, 2017, doi: 10.1002/adem.201700552.
LibreCat
| DOI