Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers
M. Henkenjohann, U. Nolte, F. Sion, C. Henke, A. Trächtler, Actuators 13 (2024).
Download
No fulltext has been uploaded.
Journal Article
| Published
| English
Author
Henkenjohann, Mark;
Nolte, Udo;
Sion, Fabian;
Henke, Christian;
Trächtler, AnsgarLibreCat
Department
Abstract
Incremental nonlinear dynamic inversion (INDI) is a widely used approach to controlling UAVs with highly nonlinear dynamics. One key element of INDI-based controllers is the control allocation realizing pseudo controls using available actuators. However, the tracking of commanded pseudo controls is not the only objective considered during control allocation. Since the approach only works locally due to linearization and the solution is often ambiguous, additional aspects like control efforts or penalizing the deviation of certain states must be considered. Conducting the control allocation by solving a quadratic program this results in a considerable number of weighting parameters, which must be tuned during control design. Currently, this is conducted manually and is therefore time consuming. An automated approach for tuning these parameters is therefore highly beneficial. Thus, this paper presents and evaluates a model-based approach automatically tuning the control allocation parameters of a tiltrotor VTOL using an optimization algorithm. This optimization algorithm searches for optimal parameters minimizing a cost functional that reflects the design target. This cost functional is calculated based on a test mission for the VTOL which is conducted within a simulation environment. The test mission represents the common operating range of the VTOL. The simulation environment consists of an aircraft model as well as a model of the INDI-based controller which is dependent on the control allocation parameters. On this basis, model-based optimization is conducted and the optimal parameters are identified. Finally, successful real-world tests on a 4-degrees-of-freedom testbench using the identified parameters are presented. Since the control allocation parameters can significantly influence the aircraft’s stability, the 4-DOF testbench for the aircraft is required for rapid validation of the parameters at a minimum amount of risk.
Publishing Year
Journal Title
Actuators
Volume
13
Issue
5
Article Number
187
ISSN
LibreCat-ID
Cite this
Henkenjohann M, Nolte U, Sion F, Henke C, Trächtler A. Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers. Actuators. 2024;13(5). doi:10.3390/act13050187
Henkenjohann, M., Nolte, U., Sion, F., Henke, C., & Trächtler, A. (2024). Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers. Actuators, 13(5), Article 187. https://doi.org/10.3390/act13050187
@article{Henkenjohann_Nolte_Sion_Henke_Trächtler_2024, title={Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers}, volume={13}, DOI={10.3390/act13050187}, number={5187}, journal={Actuators}, publisher={MDPI AG}, author={Henkenjohann, Mark and Nolte, Udo and Sion, Fabian and Henke, Christian and Trächtler, Ansgar}, year={2024} }
Henkenjohann, Mark, Udo Nolte, Fabian Sion, Christian Henke, and Ansgar Trächtler. “Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers.” Actuators 13, no. 5 (2024). https://doi.org/10.3390/act13050187.
M. Henkenjohann, U. Nolte, F. Sion, C. Henke, and A. Trächtler, “Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers,” Actuators, vol. 13, no. 5, Art. no. 187, 2024, doi: 10.3390/act13050187.
Henkenjohann, Mark, et al. “Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers.” Actuators, vol. 13, no. 5, 187, MDPI AG, 2024, doi:10.3390/act13050187.