Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
45 Publications
2023 | Dissertation | LibreCat-ID: 44509
@book{Kruse_2023, series={Forschungsberichte des Direct Manufacturing Research Centers }, title={Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns}, volume={27}, author={Kruse, Anne}, year={2023}, collection={Forschungsberichte des Direct Manufacturing Research Centers } }
LibreCat
2023 | Conference Paper | LibreCat-ID: 46957
@inproceedings{Ott_Meihöfener_Mozgova_2023, place={Austin, Texas, United States}, title={Methodical Approach to Reducing Design Time by using Neural Networks in Early Stages of Concept Development}, booktitle={Proceedings of the 34rd Annual International Solid Freeform Fabrication Symposium 2023}, author={Ott, Manuel and Meihöfener, Niclas and Mozgova, Iryna}, editor={Ott, Manuel}, year={2023} }
LibreCat
2022 | Conference Paper | LibreCat-ID: 36866
@inproceedings{Ott_Meihöfener_Koch_2022, place={Berlin}, series={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen}, title={Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien}, volume={7}, DOI={10.48447/ADD-2022-014}, booktitle={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen}, author={Ott, Manuel and Meihöfener, Niclas and Koch, Rainer}, editor={Deutscher Verband für Materialforschung und -prüfung e.V. }, year={2022}, pages={91–106}, collection={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen} }
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36871 | 
@inproceedings{Ott_Meihöfener_Koch_2022, place={Austin, Texas}, series={Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022}, title={Boosting artificial intelligence in design processes by the use of additive manufacturing}, volume={33}, booktitle={Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022}, author={Ott, Manuel and Meihöfener, Niclas and Koch, Rainer}, year={2022}, pages={696–705}, collection={Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022} }
LibreCat
| Files available
| Download (ext.)
2021 | Book (Editor) | LibreCat-ID: 26996
@book{Koch_Gräßler_Zimmer_Tröster_2021, place={Düren}, series={Forschungsberichte des Direct Manufacturing Research Centers (DMRC)}, title={Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix}, volume={25}, publisher={Shaker Verlag}, year={2021}, collection={Forschungsberichte des Direct Manufacturing Research Centers (DMRC)} }
LibreCat
2021 | Conference Paper | LibreCat-ID: 36845
@article{Kruse_Ott_Risse_Koch_2021, series={Additiv gefertigte Bauteile und Strukturen}, title={3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe}, DOI={10.48447/Add-2021-016}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Kruse, Anne and Ott, Manuel and Risse, Lena and Koch, Rainer}, year={2021}, collection={Additiv gefertigte Bauteile und Strukturen} }
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 42046
@book{Habdank_2020, place={Düren}, title={Entwicklung eines Konzepts zum qualitätsorientierten Monitoring von Social Media in der zivilen Gefahrenabwehr}, publisher={Shaker Verlag}, author={Habdank, Matthias}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 22898
@article{Schultz_Lamers_Koch_Lüke_Sauerland_2020, title={IRiS – Intelligente Rettung im SmartHome}, volume={4}, journal={vfdb-Zeitschrift}, author={Schultz, Andreas Maximilian and Lamers, Christoph and Koch, Rainer and Lüke, Richard and Sauerland, Torben}, year={2020} }
LibreCat
2019 | Dissertation | LibreCat-ID: 24752
@book{Rohde_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing Research Centers}, title={Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen}, volume={16}, publisher={Shaker Verlag}, author={Rohde, Johannes }, year={2019}, collection={Forschungsbericht des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24759
@book{Jahnke_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing Research Centers}, title={Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren}, volume={13}, publisher={Shaker Verlag}, author={Jahnke, Ulrich}, year={2019}, collection={Forschungsbericht des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24761
@book{Reiher_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing Research Centers}, title={Intelligente Optimierung von Produktgeometrien für die additive Fertigung}, volume={12}, publisher={Shaker Verlag}, author={Reiher, Thomas}, year={2019}, collection={Forschungsbericht des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24762
@book{Deppe_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing Research Centers}, title={Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung}, volume={9}, publisher={Shaker Verlag}, author={Deppe, Gereon}, year={2019}, collection={Forschungsbericht des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2019 | Journal Article | LibreCat-ID: 36846
@article{Kruse_Mummert_2019, title={Mit 3D-Druck umfassende Teilhabe möglich machen }, number={4}, journal={Werkstatt:Dialog}, author={Kruse, Anne and Mummert, Michael}, year={2019}, pages={34–35} }
LibreCat
2019 | Dissertation | LibreCat-ID: 42060
@book{Schäfer_2019, place={Hamburg}, title={Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr}, publisher={tredition GmbH}, author={Schäfer, Christina }, year={2019} }
LibreCat
2018 | Conference Paper | LibreCat-ID: 21696
@inproceedings{Büsching_Lindemann_Jahnke_Kruse_Koch_2018, title={Technology Integration into Existing Companies}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Büsching, J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R.}, year={2018}, pages={14–31} }
LibreCat
| DOI
2018 | Dissertation | LibreCat-ID: 42768
@book{Lindemann_2018, title={Systematic Approach for Cost Efficient Design and Planning with Additive Manufacturing}, author={Lindemann, Christian-Friedrich Wilhelm}, year={2018} }
LibreCat
2017 | Conference Paper | LibreCat-ID: 21690
@inproceedings{Deppe_Koch_Kaesberg_2017, title={Rational Decision-Making for the Beneficial Application of Additive Manufacturing}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Deppe, G. and Koch, R. and Kaesberg, M.}, year={2017}, pages={2597–2611} }
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21691
@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration for geometry generation for product optimization with Additive Manufacturing}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher, T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21692
@inproceedings{Kruse_Reiher_Koch_2017, title={Integrating AM into existing companies - selection of existing parts for increase of acceptance}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Kruse, A. and Reiher, T. and Koch, R.}, year={2017}, pages={2575–2584} }
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
@inproceedings{Jahnke_Koch_Oppermann_2017, title={Design for protection: Systematic approach to prevent product piracy during product development using AM }, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke, U. and Koch, R. and Oppermann, A. T.}, year={2017}, pages={2481–2492} }
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21694
@inproceedings{Büsching_Koch_2017, title={Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Büsching, J. and Koch, R.}, year={2017}, pages={2585–2596} }
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21695
@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration for geometry generation for product optimization with Additive Manufacturing}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher, T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21697
@article{Deppe_Lindemann_2017, title={Hybrid Manufacturing with Additive Manufacturing}, volume={17}, DOI={https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf}, number={11}, journal={CECIMO Magazine}, author={Deppe, G. and Lindemann, C.}, year={2017}, pages={28–29} }
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21704
@article{Reiher_Lindemann_Jahnke_Deppe_Koch_2017, title={Holistic approach for industrializing AM technology - from part selection to test and verification}, volume={2}, DOI={https://doi.org/10.1007/s40964-017-0018-y}, journal={Progress in Additive Manufacturing}, publisher={Springer}, author={Reiher, T. and Lindemann, C. and Jahnke, U. and Deppe, G. and Koch, R.}, year={2017}, pages={43–55} }
LibreCat
| DOI
2017 | Conference Abstract | LibreCat-ID: 41389
@inproceedings{Seifert_Schaper_2017, title={Veränderungen des bildungswissenschaftlichen Wissens und der subjektiven Kompetenzeinschätzungen von Studierenden im Praxissemester.}, booktitle={2. Internationalen Kongress „Lernen in der Praxis.“}, author={Seifert, Andreas and Schaper, Niclas}, year={2017} }
LibreCat
2017 | Dissertation | LibreCat-ID: 42085
@book{Plaß_2017, place={Hamburg}, title={Akteurzentrierte Unterstützung bei Gefahrensituationen in der U-Bahn}, publisher={tredition GmbH}, author={Plaß, Marco}, year={2017} }
LibreCat
2016 | Conference Paper | LibreCat-ID: 21687
@inproceedings{Deppe_Koch_2016, title={Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM}, volume={27}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf}, booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Deppe, G. and Koch, R.}, year={2016}, pages={81–92} }
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21688
@inproceedings{Reiher_Koch_2016, title={Product optimization with and for Additive Manufacturing}, volume={27}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf}, booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Reiher, T. and Koch, R.}, year={2016}, pages={2236–2249} }
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21689
@inproceedings{Lindemann_Koch_2016, title={Cost Efficient Design and Planning for Additive Manufacturing Technologies}, volume={27}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf}, booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Lindemann, C. and Koch, R.}, year={2016}, pages={93–112} }
LibreCat
| DOI
2016 | Book | LibreCat-ID: 21698
@book{Lindemann_Deppe_Koch_2016, title={Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market}, publisher={Metropolis Verlag}, author={Lindemann, C. and Deppe, G. and Koch, R.}, year={2016} }
LibreCat
2016 | Book | LibreCat-ID: 21699
@book{Jahnke_Koch_2016, title={Prevention of Product Piracy - Potentials of Additive Manufacturing}, publisher={Metropolis Verlag}, author={Jahnke, U. and Koch, R.}, year={2016} }
LibreCat
2016 | Conference Paper | LibreCat-ID: 21702
@inproceedings{Reiher_Deppe_Koch_2016, title={Combining material efficiency and part reliability by product optimization applying additive manufacturing}, volume={6}, DOI={https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf}, booktitle={International Conference Production Engineering and Management 2016}, author={Reiher, T. and Deppe, G. and Koch, R.}, year={2016}, pages={27–38} }
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21705
@inproceedings{Deppe_Koch_2016, title={Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung}, volume={13}, DOI={https://doi.org/10.3139/9783446450608.031}, booktitle={Rapid Tech 2016}, publisher={Hanser Verlag}, author={Deppe, G. and Koch, R.}, year={2016}, pages={349–360} }
LibreCat
| DOI
2016 | Dissertation | LibreCat-ID: 42045
@book{Schneider_2016, title={Konzeptentwicklung zur Einbindung von Simulationen - Unterstützung des Informationsmanagements im Bereich der zivilen Gefahrenabwehr}, publisher={Shaker Verlag}, author={Schneider, Steffen }, year={2016} }
LibreCat
2015 | Conference Paper | LibreCat-ID: 21683
@inproceedings{Lindemann_Jahnke_Reiher_Koch_2015, title={Towards a sustainable and economic selection of part candidates for Additive Manufacturing}, volume={21}, DOI={https://doi.org/10.1108/RPJ-12-2014-0179}, number={2}, booktitle={Rapid Prototyping Journal}, publisher={Emerald}, author={Lindemann, C. and Jahnke, U. and Reiher, T. and Koch, R.}, year={2015}, pages={216–227} }
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21684
@inproceedings{Deppe_Lindemann_Koch_2015, title={Developement of an economic decision support for the application of Additive Manufacturing in aerospace}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Deppe, G. and Lindemann, C. and Koch, R.}, year={2015}, pages={1560–1563} }
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21685
@inproceedings{Jahnke_Büsching_Reiher_Koch_2015, title={Protection measures against product piracy and application by the use of AM}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke, U. and Büsching, J. and Reiher, T. and Koch, R.}, year={2015}, pages={1601–1611} }
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21686
@inproceedings{Reiher_Koch_2015, title={FE-Optimization and data handling for Additive Manufacturing of structural parts}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Reiher, T. and Koch, R.}, year={2015}, pages={1092–1103} }
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21700
@inproceedings{Jahnke_Lindemann_2015, title={Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy}, booktitle={Inside 3D Printing Conference and Expo}, author={Jahnke, U. and Lindemann, C.}, year={2015} }
LibreCat
2015 | Conference Paper | LibreCat-ID: 21701
@inproceedings{Deppe_Reiher_Koch_2015, title={Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing}, volume={5}, DOI={https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf}, booktitle={International Conference Production Engineering and Management 2015}, author={Deppe, G. and Reiher, T. and Koch, R.}, year={2015}, pages={219–230} }
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21703
@inproceedings{Lindemann_Reiher_Koch_2015, title={Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing}, booktitle={Paris Space Week}, author={Lindemann, C. and Reiher, T. and Koch, R.}, year={2015} }
LibreCat
2014 | Journal Article | LibreCat-ID: 21706
@article{Deppe_Koch_2014, title={Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics}, volume={2014}, DOI={https://www.rtejournal.de/ausgabe11/3958}, number={11}, journal={Rtejournal}, author={Deppe, G. and Koch, R.}, year={2014} }
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 21682
@inproceedings{Lindemann_Jahnke_Moi_Koch_2013, title={Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs}, volume={24}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf}, booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Lindemann, C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2013}, pages={998–1008} }
LibreCat
| DOI
2013 | Dissertation | LibreCat-ID: 42097
@book{Becker_2013, title={Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen durch interaktive SOPs }, author={Becker, Tobias }, year={2013} }
LibreCat
| Download (ext.)
2012 | Conference Paper | LibreCat-ID: 21680
@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing}, volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf}, booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann, C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }
LibreCat
| DOI