Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

300 Publications


2016 | Conference Paper | LibreCat-ID: 22130
W. Reschetnik, J. P. Brüggemann, M. E. Aydinöz, G. Kullmer, H. A. Richard, and M. Schaper, “Lebensdauerbeeinflussung durch Additive Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 131–140.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22132
A. Riemer, L. Leuders, G. Kullmer, and H. A. Richard, “Materialkennwerte lasergeschmolzener Werkstoffe,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 161–174.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22146
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” in Procedia Structural Integrity, 2016, pp. 3040–3048.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22149
A. Riemer and H. A. Richard, “Crack Propagation in Additive Manufactured Materials and Structures,” in Procedia Structural Integrity, 2016, pp. 1229–1236.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22403
T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2016, pp. 151–160.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21687
G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 81–92.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21688
T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2236–2249.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21689
C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive Manufacturing Technologies,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 93–112.
LibreCat | DOI
 

2016 | Book | LibreCat-ID: 21698
C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
 

2016 | Book | LibreCat-ID: 21699
U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 21702
T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21705
G. Deppe and R. Koch, “Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung,” in Rapid Tech 2016, 2016, vol. 13, pp. 349–360.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21997
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management for additive manufacturing: survey on requirements and current state,” in 14th International DESIGN Conference 2016, 2016, vol. 14.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 16270
T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no. 5, 2016.
LibreCat
 

2015 | Dissertation | LibreCat-ID: 24751
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, vol. Band, 2. Düren: Shaker Verlag GmbH, 2015.
LibreCat | Download (ext.)
 

2015 | Conference Paper | LibreCat-ID: 22108
W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2015, pp. 63–72.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22166
E. Klemp, “Industrial applications in AM - aerospace and overhaul,” in ASME AM3D Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22168
E. Klemp, “Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen,” in Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22169
E. Klemp, “Möglichkeiten, Chancen und Mythen additiver Fertigung,” in Hanse-Aerospace-Themennachmittag im Hause SLM, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22170
E. Klemp, “Additive Manufacturing - Potenziale, Zukunftschancen und Hürden,” in Messe Interzum, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22171
E. Klemp, “Technology Update 2015 for Metals,” in SLM-Usermeeting, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22172
E. Klemp, “AM-Verfahren - Möglichkeiten in der industriellen Fertigung,” in VDMA - Symposium auf der Hannover Messe Industrie, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22178
P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 514–526.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22179
S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22189
P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22199
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22394
G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating geometrical limitations,” Rapid Prototyping Journal, vol. 21, no. 6, pp. 662–670, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22395
T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22396
T. Lieneke et al., “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
LibreCat | DOI
 

2015 | Dissertation | LibreCat-ID: 22397
G. Adam, Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling. Shaker Verlag, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22398
G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 21683
C. Lindemann, U. Jahnke, T. Reiher, and R. Koch, “Towards a sustainable and economic selection of part candidates for Additive Manufacturing,” in Rapid Prototyping Journal, 2015, vol. 21, no. 2, pp. 216–227.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21684
G. Deppe, C. Lindemann, and R. Koch, “Developement of an economic decision support for the application of Additive Manufacturing in aerospace,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1560–1563.
LibreCat | DOI
 

Filters and Search Terms

department=219

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed