Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
Download
No fulltext has been uploaded.
Conference Paper
| English
Author
Josupeit, Stefan;
Tutzschky, S.;
Gessler, M.;
Schmid, Hans-JoachimLibreCat
Department
Abstract
Powder ageing effects due to thermal load usually lead to a limited recyclability of unmolten polyamide 12 powders in the laser sintering process. In this work, the recycling optimized material PA 2221 is analyzed regarding its ageing behavior along a series of more than ten build/refresh cycles using a refresh ratio of about 30%. Thereby, the melt viscosity is measured before and after every cycle and the “steady-state” condition is determined accordingly. In addition, the material properties of parts manufactured with PA 2221 are discussed dependent on different process parameters and compared to parts made of standard PA 2200 material with a refresh rate of about 50%. These parameters include the mechanical properties as well as for example the impact strength and geometrical properties as function of layer thickness and testing temperature. As a result, the optimal process conditions and achievable material properties for PA 2221 can be derived from this work.
Publishing Year
Proceedings Title
Proceedings of the Rapid Tech 2015
Page
63-78
ISBN
LibreCat-ID
Cite this
Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In: Proceedings of the Rapid Tech 2015. Springer Vieweg; 2015:63-78. doi:10.1007/978-3-662-48473-9_5
Josupeit, S., Tutzschky, S., Gessler, M., & Schmid, H.-J. (2015). Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In Proceedings of the Rapid Tech 2015 (pp. 63–78). Springer Vieweg. https://doi.org/10.1007/978-3-662-48473-9_5
@inproceedings{Josupeit_Tutzschky_Gessler_Schmid_2015, title={Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates}, DOI={10.1007/978-3-662-48473-9_5}, booktitle={Proceedings of the Rapid Tech 2015}, publisher={Springer Vieweg}, author={Josupeit, Stefan and Tutzschky, S. and Gessler, M. and Schmid, Hans-Joachim}, year={2015}, pages={63–78} }
Josupeit, Stefan, S. Tutzschky, M. Gessler, and Hans-Joachim Schmid. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” In Proceedings of the Rapid Tech 2015, 63–78. Springer Vieweg, 2015. https://doi.org/10.1007/978-3-662-48473-9_5.
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
Google Scholar
ISBN Search