Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2022 | Journal Article | LibreCat-ID: 36815
S. Shaqiri, D. Kaczmarek, F. vom Lehn, J. Beeckmann, H. Pitsch, and T. Kasper, “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion,” Frontiers in Energy Research, vol. 10, 2022, doi: 10.3389/fenrg.2022.859112.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36817
M. Hoener and T. Kasper, “Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate,” Combustion and Flame, vol. 243, Art. no. 112096, 2022, doi: 10.1016/j.combustflame.2022.112096.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36810
D. A. Knyazkov, A. V. Cherepanov, V. G. Kiselev, I. E. Gerasimov, T. Kasper, and A. G. Shmakov, “Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.157.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31330
F. Beule, D. Teutenberg, and G. Meschut, “Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Art. no. 095440702211001, 2022, doi: 10.1177/09544070221100130.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36814
D. Kaczmarek et al., “Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition,” Applications in Energy and Combustion Science, Art. no. 100107, 2022, doi: 10.1016/j.jaecs.2022.100107.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36811
D. Kaczmarek, C. Rudolph, B. Atakan, and T. Kasper, “Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.195.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36813
T. Bierkandt et al., “A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.205.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33002
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, doi: 10.1177/14644207221145886.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32103
H. Hanses and I. Horwath, “Development of operational and demand-oriented firefighting equipment,” Materials Today: Proceedings, vol. 62, no. 5, pp. 2684–2688, 2022, doi: 10.1016/j.matpr.2022.06.031.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34459
L. Schmelzle et al., “Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature,” Journal of Adhesion Science and Technology, 2022, doi: 10.1080/01694243.2022.2125714.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 20446
S. Neumann, G. Meschut, F. Schmatz, and W. Flügge, “Robotergestütztes manuelles mechanisches Fügen – RoboterFügen.”
LibreCat
2022 | Conference Paper | LibreCat-ID: 36866
M. Ott, N. Meihöfener, and R. Koch, “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien,” in Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, vol. 7, pp. 91–106, doi: 10.48447/ADD-2022-014.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 37258
S. Haller, S. R. Tinkloh, T. Tröster, and R. Brandt, “The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element,” presented at the 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32819
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier, “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,” presented at the 6th International Conference on Steels in Cars and Trucks, Mailand, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37635
M. Dörner, Wave-Schnecken in der Einschneckenextrusion. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37639
L. R. Helmlinger, Untersuchungen zur werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen und Entwicklung eines neuen Aufbereitungsverfahrens. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37638
F. M. Mühlhoff, Ein Beitrag zur InMould-Plasma Technologie zur Oberflächenvorbehandlung im Mehrkomponentenspritzgießwerkzeug. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37637
M. O. Bialaschik, Ein Beitrag zum Warmgasstumpfschweißen von Kunststoffen. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37636
H. Malatyali, Modellierung der Carbonfaserlängenverkürzung. 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 23405
I. Gräßler, P. Scholle, and H. Thiele, “Szenario-Technik,” in Integrated Design Engineering. Ein interdisziplinäres Modell für die ganzheitliche Produktentwicklung, Kapitel: 20, vol. Kapitel 20, S. Vajna, Ed. Berlin Heidelberg: Springer-Verlag, 2022, pp. 544–566.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32174 | 
I. Gräßler, H. Thiele, B. Grewe, and M. Hieb, “Responsibility Assignment in Systems Engineering,” Proceedings of the Design Society, vol. 2, pp. 1875–1884, 2022, doi: 10.1017/pds.2022.190.
LibreCat
| Files available
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 31185
X. Ju, R. Mahnken, Y. Xu, L. Liang, C. Cheng, and W. Zhou, “Multiscale analysis of composite structures with goal-oriented mesh adaptivity and reduced order homogenization,” Composite Structures, Art. no. 115699, 2022, doi: 10.1016/j.compstruct.2022.115699.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33035
L. A. Mapura and E. Y. Kenig, “Effect of diffusivity and chemical reactions on the determination of mass transfer coefficients in columns with structured packing,” presented at the Annual Meeting on Reaction Engineering and ProcessNet Subject Division Heat and Mass Transfer, Würzburg, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33254
F. Buckmann and E. Kenig, “Experimental study on the condensation of pure substances in outer pillow-plate channels,” presented at the Annual Meeting on Reaction Engineering and ProcessNet Subject Division “Heat and Mass Transfer,” Würzburg, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30656
R. Mahnken, “Strain mode-dependent weighting functions in hyperelasticity accounting for verification, validation, and stability of material parameters,” Archive of Applied Mechanics, vol. 92, no. 3, pp. 713–754, 2022, doi: 10.1007/s00419-021-02069-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30655
X. Ju, R. Mahnken, Y. Xu, and L. Liang, “Goal-oriented error estimation and h-adaptive finite elements for hyperelastic micromorphic continua,” Computational Mechanics, vol. 69, no. 3, pp. 847–863, 2022, doi: 10.1007/s00466-021-02117-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30657
A. Henkes, H. Wessels, and R. Mahnken, “Physics informed neural networks for continuum micromechanics,” Computer Methods in Applied Mechanics and Engineering, vol. 393, Art. no. 114790, 2022, doi: 10.1016/j.cma.2022.114790.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 40647
T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, and E. Y. Kenig, “Liquid flow morphology investigation in structured packings for offshore applications using a novel flow imaging sensor,” presented at the Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am Main, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 40518
A. Pöhler, Automatisierte dezentrale Produktionssteuerung für cyber-physische Produktionssysteme mit digitaler Repräsentation der Beschäftigten. LibreCat University, 2022.
LibreCat
| Files available
| DOI
2022 | Conference Paper | LibreCat-ID: 35271
D. Weiß and B. Schramm, “Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen,” in Procedia Structural Integrity, Madeira, 2022, vol. 42, pp. 879–885, doi: 10.1016/j.prostr.2022.12.111.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 41906
L. Risse, S. C. Woodcock, J.-P. Brüggemann, G. Kullmer, and H. A. Richard, “Stiffness optimization and reliable design of a hip implant by using the potential of additive manufacturing processes,” BioMedical Engineering OnLine, vol. 21, no. 1, Art. no. 23, 2022, doi: 10.1186/s12938-022-00990-z.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 29853
K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, and G. Kullmer, “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze ,” presented at the 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 41907
S. C. Woodcock, B. Schramm, G. Kullmer, and H. A. Richard, “Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode,” presented at the Workshop – Zuverlässigkeit von Implantaten und Biostrukturen, Rostock, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32392
T. Duffe, G. Kullmer, K. Tews, T. Aubel, and G. Meschut, “Global energy release rate of small penny-shaped cracks in hyperelastic materials under general stress conditions,” Theoretical and Applied Fracture Mechanics, 2022, doi: 10.1016/j.tafmec.2022.103461.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 33088
T. Duffe, K. Tews, G. Kullmer, and G. Meschut, “Fracture mechanical concept to predict crack nucleation in elastic adhesive joints,” presented at the ECF23, European Conference on Fracture 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33495
T. Duffe, K. Tews, T. Aubel, G. Meschut, and G. Kullmer, “Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz,” Fachzeitschrift für Schweißen und verwandte Verfahren, vol. 74, no. 9, pp. 570–576, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 31848
J. A. Striewe, Haftung und Korrosionsbeständigkeit direktgefügter Hybridsysteme aus kohlenstofffaserverstärktem Epoxidharz und verzinktem Stahl für den Automobilleichtbau. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32492
S. Lau et al., “Aluminum Diethylphosphinate as a Flame Retardant for Polyethylene: Investigation of the Pyrolysis and Combustion Behavior of PE/AlPi-Mixtures,” Combustion and Flame, vol. 240, Art. no. 112006, 2022, doi: 10.1016/j.combustflame.2022.112006.
LibreCat
| DOI
2022 | Dissertation | LibreCat-ID: 42127
C. Kummert, Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe, vol. 26. Düren: Shaker Verlag, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 42637
L. M. Blumenthal, Multidomänenbasierte Optimierung des axialdynamischen Schaltverhaltens von Federkraftbremsen, vol. 15. Düren: Shaker Verlag, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30153
T. Schmolke et al., “Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur,” Online, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 42762
S. Meyer, Umformtechnisches Fügen von Stanzmuttern während des Formhärtens von 22MnB5. 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 37424
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster),” presented at the 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 37436
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, and H.-J. Schmid, “Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 37426
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 11th International Aerosol Conference (IAC), Athens, 2022.
LibreCat
| Files available