34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, S., Koers, T., Magyar, B., Zimmer, D., & Lieneke, T. (2023). Depiction of support structures in technical drawings. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023 (Vol. 34).
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, S., Koers, T., Magyar, B., Zimmer, D., & Lieneke, T. (2023). Depiction of support structures in technical drawings. 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, T., Lammers, S., & Zimmer, D. (2021). Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy. 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium . 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA. http://dx.doi.org/10.26153/tsw/17565
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, S., Lieneke, T., & Zimmer, D. (2021). Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
Lieneke, T., Künneke, T., Eschner, N., Jacob, A., Schäfer, M., Hickmann, T., Faroun, R., Hoffmann, M., Scholl, M., Baumeister, K., Zimmer, D., & Lanza, G. (2020). Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, T., Lieneke, T., Lammers, S., & Zimmer, D. (2019). Design guidelines for post-processing of laser beam melting in context of support structures. In Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing (pp. 137–140). https://www.euspen.eu/knowledge-base/AM19127.pdf
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., & Zimmer, D. (2019). Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing. https://www.euspen.eu/knowledge-base/AM19129.pdf
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018 IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., … Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., & Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 113(11), 742–745. https://doi.org/10.3139/104.112005
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., & Schöppner, V. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, 10, 83–88.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035 LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, S., Tominski, J., Magerkohl, S., Künneke, T., Lieneke, T., & Zimmer, D. (2018). Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. Proceedings of the 15th Rapid.Tech Conference, 81–94. https://doi.org/10.3139/9783446458123.005
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, S., Tominski, J., Magerkohl, S., Lieneke, T., Künneke, T., & Zimmer, D. (2018). Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production. 29th Annual International Solid Freeform Fabrication Symposium, 29. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018 IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, V., Knoop, F., Köhler, M., Lieneke, T., & Zimmer, D. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion, 70. Jg. Heft 10, 83–88.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, V., Zimmer, D., Knoop, F., & Lieneke, T. (2018). Additive Fertigung nach Maß. Kunststoffe, 108. Jg. Heft 6.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, T., Adam, G., Josupeit, S., Delfs, P., & Zimmer, D. (2017). Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern. In Proceedings of the 14th Rapid.Tech Conference (pp. 327–344). Hanser Verlag. https://doi.org/10.3139/9783446454606.024
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, F., & Lieneke, T. (2017). Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling. In Inside 3D Printing 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, T., Denzer, V., & Zimmer, D. (2017). Geometrische Toleranzen für additive Fertigungsverfahren. In 3. Summer School Toleranzmangement 2017 (Vol. 3).
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
Eschner, N., Kopf, R., Lieneke, T., Künneke, T., Berger, D., Häfner, B., … Zimmer, D. (2017). Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 112(7–8), 469–472. https://doi.org/10.3139/104.111751
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Lieneke, T., & Schöppner, V. (2017). Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66. https://doi.org/10.3139/9783446454606.004
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H., & Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts: Influences and measures. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 107–120). https://doi.org/10.3139/9783446450608.009
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, S., Delfs, P., Lieneke, T., & Schmid, H.-J. (2016). Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In 27th Annual International Solid Freeform Fabrication Symposium .
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, T., de Groot, S., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting. In ASPE 2016 Summer Topical Meeting (p. S.9-15).
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In ASPE Spring Topical Meeting (p. S.3-8). https://doi.org/10.3139/9783446454606.004
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In Summer Topical Meeting 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, T., Denzer, V., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling. In CAT 2016 (Vol. 43, pp. 286–291). https://doi.org/10.1016/j.procir.2016.02.361
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, W., Eichmann, M., Witt, G., Josupeit, S., Delfs, P., Lieneke, T., Adam, G., & Schmid, H.-J. (Eds.). (2016). Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. https://doi.org/10.3139/9783446450608.009
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, T. (2015). Systematical determination of dimensional tolerances for additive manufacturing . In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26).
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: APA

Export / Embed

34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, S., Koers, T., Magyar, B., Zimmer, D., & Lieneke, T. (2023). Depiction of support structures in technical drawings. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023 (Vol. 34).
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, S., Koers, T., Magyar, B., Zimmer, D., & Lieneke, T. (2023). Depiction of support structures in technical drawings. 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, T., Lammers, S., & Zimmer, D. (2021). Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy. 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium . 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA. http://dx.doi.org/10.26153/tsw/17565
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, S., Lieneke, T., & Zimmer, D. (2021). Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
Lieneke, T., Künneke, T., Eschner, N., Jacob, A., Schäfer, M., Hickmann, T., Faroun, R., Hoffmann, M., Scholl, M., Baumeister, K., Zimmer, D., & Lanza, G. (2020). Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, T., Lieneke, T., Lammers, S., & Zimmer, D. (2019). Design guidelines for post-processing of laser beam melting in context of support structures. In Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing (pp. 137–140). https://www.euspen.eu/knowledge-base/AM19127.pdf
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., & Zimmer, D. (2019). Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing. https://www.euspen.eu/knowledge-base/AM19129.pdf
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018 IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., … Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., & Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 113(11), 742–745. https://doi.org/10.3139/104.112005
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., & Schöppner, V. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, 10, 83–88.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035 LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, S., Tominski, J., Magerkohl, S., Künneke, T., Lieneke, T., & Zimmer, D. (2018). Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. Proceedings of the 15th Rapid.Tech Conference, 81–94. https://doi.org/10.3139/9783446458123.005
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, S., Tominski, J., Magerkohl, S., Lieneke, T., Künneke, T., & Zimmer, D. (2018). Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production. 29th Annual International Solid Freeform Fabrication Symposium, 29. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., & Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. 2018 IEEE Transportation Electrification Conference and Expo (ITEC). https://doi.org/10.1109/itec.2018.8450250
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, V., Knoop, F., Köhler, M., Lieneke, T., & Zimmer, D. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion, 70. Jg. Heft 10, 83–88.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, V., Zimmer, D., Knoop, F., & Lieneke, T. (2018). Additive Fertigung nach Maß. Kunststoffe, 108. Jg. Heft 6.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, T., Adam, G., Josupeit, S., Delfs, P., & Zimmer, D. (2017). Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern. In Proceedings of the 14th Rapid.Tech Conference (pp. 327–344). Hanser Verlag. https://doi.org/10.3139/9783446454606.024
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, F., & Lieneke, T. (2017). Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling. In Inside 3D Printing 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, T., Denzer, V., & Zimmer, D. (2017). Geometrische Toleranzen für additive Fertigungsverfahren. In 3. Summer School Toleranzmangement 2017 (Vol. 3).
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
Eschner, N., Kopf, R., Lieneke, T., Künneke, T., Berger, D., Häfner, B., … Zimmer, D. (2017). Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 112(7–8), 469–472. https://doi.org/10.3139/104.111751
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Lieneke, T., & Schöppner, V. (2017). Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66. https://doi.org/10.3139/9783446454606.004
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H., & Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts: Influences and measures. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 107–120). https://doi.org/10.3139/9783446450608.009
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, S., Delfs, P., Lieneke, T., & Schmid, H.-J. (2016). Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In 27th Annual International Solid Freeform Fabrication Symposium .
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, T., de Groot, S., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting. In ASPE 2016 Summer Topical Meeting (p. S.9-15).
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In ASPE Spring Topical Meeting (p. S.3-8). https://doi.org/10.3139/9783446454606.004
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In Summer Topical Meeting 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, T., Denzer, V., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling. In CAT 2016 (Vol. 43, pp. 286–291). https://doi.org/10.1016/j.procir.2016.02.361
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, W., Eichmann, M., Witt, G., Josupeit, S., Delfs, P., Lieneke, T., Adam, G., & Schmid, H.-J. (Eds.). (2016). Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. https://doi.org/10.3139/9783446450608.009
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, T. (2015). Systematical determination of dimensional tolerances for additive manufacturing . In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26).
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: APA

Export / Embed