Tobias Lieneke

tobias.lieneke@uni-paderborn.de
ID
13956

34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, Stefan, et al. Depiction of Support Structures in Technical Drawings. 2023.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, Tobias, et al. “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy.” 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , 2021, doi:http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, Stefan, et al. Development of a Method to Derive Design Guidelines for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion. 2021.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
Lieneke, Tobias, et al. Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, Tobias, et al. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019, doi:https://www.euspen.eu/knowledge-base/AM19129.pdf.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, vol. 10, VDI Fachmedien GmbH & Co. KG, 2018, pp. 83–88.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., et al. “Additive Fertigung Nach Maß.” Kunststoffe, vol. 6, 2018, pp. 70–73, doi:https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, Volker, et al. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” Konstruktion, vol. 70. Jg. Heft 10, 2018, pp. 83–88.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, Volker, et al. “Additive Fertigung nach Maß.” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” 3. Summer School Toleranzmangement 2017, vol. 3, 2017.
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
Eschner, Niclas, et al. “Kombination Etablierter Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, De Gruyter, 2017, pp. 469–72, doi:10.3139/104.111751.
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., et al. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi:10.3139/9783446454606.004.
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.” CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, Wieland, et al., editors. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures. 2016, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
Lammers, Stefan, et al. Depiction of Support Structures in Technical Drawings. 2023.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
Lieneke, Tobias, et al. “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy.” 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , 2021, doi:http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
Lammers, Stefan, et al. Development of a Method to Derive Design Guidelines for Production-Suitable Support Structures in Metal Laser Powder Bed Fusion. 2021.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
Lieneke, Tobias, et al. Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, et al. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–40, doi:https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, Tobias, et al. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019, doi:https://www.euspen.eu/knowledge-base/AM19129.pdf.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, vol. 10, VDI Fachmedien GmbH & Co. KG, 2018, pp. 83–88.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., et al. “Additive Fertigung Nach Maß.” Kunststoffe, vol. 6, 2018, pp. 70–73, doi:https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, Volker, et al. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” Konstruktion, vol. 70. Jg. Heft 10, 2018, pp. 83–88.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, Volker, et al. “Additive Fertigung nach Maß.” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” 3. Summer School Toleranzmangement 2017, vol. 3, 2017.
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
Eschner, Niclas, et al. “Kombination Etablierter Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, De Gruyter, 2017, pp. 469–72, doi:10.3139/104.111751.
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., et al. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi:10.3139/9783446454606.004.
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.” CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, Wieland, et al., editors. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures. 2016, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed