34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion,” 2021.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
W. Kniffka et al., Eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. München, 2016.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
T. Lieneke et al., “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

34 Publications

Mark all

[34]
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat | Download (ext.)
 
[33]
2023 | Conference Paper | LibreCat-ID: 46745
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.
LibreCat
 
[32]
2021 | Conference Paper | LibreCat-ID: 32799
T. Lieneke, S. Lammers, and D. Zimmer, “Geometrical Deviations In Additive Manufacturing -- Influences On The Manufacturing Accuracy,” presented at the 32nd Annual International Virtual Solid Freeform Fabrication (SFF) Symposium , Austin, Texas, USA, 2021, doi: http://dx.doi.org/10.26153/tsw/17565.
LibreCat | DOI
 
[31]
2021 | Conference Paper | LibreCat-ID: 23880
S. Lammers, T. Lieneke, and D. Zimmer, “Development of a Method to Derive Design Guidelines for Production-suitable Support Structures in Metal Laser Powder Bed Fusion,” 2021.
LibreCat
 
[30]
2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat | Files available
 
[29]
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 
[28]
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 
[25]
2018 | Conference Paper | LibreCat-ID: 22435
T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 22436
A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
 
[22]
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 
[21]
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 
[20]
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[18]
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
 
[17]
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
 
[16]
2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 
[15]
2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 
[14]
2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 
[13]
2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 
[12]
2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 
[11]
2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 
[8]
2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 
[5]
2016 | Book (Editor) | LibreCat-ID: 26113
W. Kniffka et al., Eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. München, 2016.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 22396
T. Lieneke et al., “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
LibreCat | DOI
 
[3]
2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
 
[2]
2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
 
[1]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed