283 Publications
2018 | Conference Paper | LibreCat-ID: 26951
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, and S. S. Asad, “Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen,” presented at the 17. EWIKON Heißkanal-Forum, Frankenberg (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26953
E. Moritzer and G. Heiderich, “Investigation on the Fiber Compounding with a New Type of Compounding Machine,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26961
E. Moritzer, C. Budde, and D. Krassmann, “Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26963
E. Moritzer, G. Heiderich, and M. Wittke, “Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26969
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26970
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26971
E. Moritzer and M. Wittke, “Synergies from the Screw,” Kunststoffe International, no. 12/2018, pp. 34–37, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26972
E. Moritzer and M. Wittke, “Syngerien aus der Schnecke,” Kunststoffe, no. 12/2018, pp. 69–72, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26974
E. Moritzer and T. Nordmeyer, “System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes,” presented at the Joining in Car Body Engineering 2018, Bad Nauheim (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26975
E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26977
E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Book Chapter | LibreCat-ID: 26979
E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen,” in Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
2017 | Conference Paper | LibreCat-ID: 25578
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 24529
E. Moritzer and M. Hopp, “Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes,” 2017.
LibreCat
2017 | Conference (Editor) | LibreCat-ID: 25739
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27200
E. Moritzer and T. Westhues, “Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27203
E. Moritzer and B. Landgräber, “Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27204
E. Moritzer, C. Budde, and M. Hüttner, “Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27206
E. Moritzer and T. Nordmeyer, “Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths,” presented at the 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27209
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27212
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27215
E. Moritzer, G. Heiderich, and A. Hirsch, “Fiber Length Reduction during Injection Molding,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27218
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline Surface Activation in the Injection Molding Process for High Adhesive Strength,” adhesion ADHESIVES & SEALANTS, no. 14. Jg. Heft 4, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27219
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten,” Adhäsion, no. 61. Jg. Heft 10, pp. 46–51, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27223
E. Moritzer and B. Landgräber, “Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27224
E. Moritzer, J. Krugmann, and C. Leister, “Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?,” Kunststoffe erfolgreich kleben, no. 1, pp. 81–86, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27225
E. Moritzer, N. Friedrich, and J. Berger, “Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig. ,” Kunststoffe erfolgreich kleben, no. 1, pp. 213–221, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27229
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27230
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27243
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, no. 8. Jg. Heft 8, p. 246, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27244
E. Moritzer et al., “Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen,” Ingenieurspiegel - Fachmagazin für Ingenieure, no. 5. Jg. Heft 3, pp. 52–54, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 27246
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “An Approach to Non-Destructive Testing of Aged Polymers,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27250
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers,” Kunststoffe international, no. 10. Jg. Heft 4, pp. 43–45, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27251
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske, “Development of an Inline Plasma Treatment During Injection Molding Process,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27252
E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27253
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27254
E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length Degradation in Injection Moulds,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27255
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27256
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27257
E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer Processing,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27259
E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft 2, pp. 54–58, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27260
E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,” Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27264
E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess,” Kunststofftechnik - Spritzgießen 2016, no. 1, pp. 27–39, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27267
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren,” Kunststoffe, no. 106. Jg. Heft 6, pp. 94–96, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27269
E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27276
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, and M. Webersen, “The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27278
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ultraschallbasierte Charakterisierung von gealterten Polymeren,” Jahresmagazin Kunststofftechnik, pp. 98–103, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27279
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren,” presented at the 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 24530
E. Moritzer and M. Hopp, “Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications,” 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27292
E. Moritzer, C. Budde, and M. Hüttner, “Wie Kurz- und Endlosfasern sich am besten vertragen,” Kunststoffe, vol. 105, no. 3, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27295
E. Moritzer, C. Leister, and T. Nordmeyer, “Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma,” Zeitschrift Kunststofftechnik, vol. 11, no. 4, pp. 205–226, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27297
E. Moritzer, R. Kleeschulte, S. Pollmann, and K. Anger, “Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time,” presented at the Europe-Africa Conference of the Polymer Processing Society, Graz (Österreich), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27304
E. Moritzer and C. Budde, “Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27309
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, and A. Knospe, “Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet,” presented at the 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27312
E. Moritzer and C. Budde, “Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers,” presented at the DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27313
E. Moritzer and G. Heiderich, “Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27317
E. Moritzer and S. Seidel, “Numerical Analysis and Evaluation of Process and Geometry Specific Transient Temperature Fields for a New Variation of Gas-Assisted Injection Molding,” International Polymer Processing, vol. 30, no. 2, pp. 265–275, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27326
E. Moritzer, J. Leßmann, T. Plugge, and S. Seidel, “Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, pp. 69–102, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27327
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, and M. Bastian, “Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen,” presented at the 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
2014 | Conference Paper | LibreCat-ID: 24532
E. Moritzer and M. Hopp, “The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC),” 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27328
E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” Welding in the World, vol. 58, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27330
E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27333
E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27335
E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27336
E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” Joining Plastics, vol. 8, no. 3, pp. 178–182, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27339
E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27340
E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27343
E. Moritzer and C. Budde, “Hybrid Lightweight Construction of a Chassis Frame Structure,” presented at the Polymers and Energy, Jena (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27345
E. Moritzer, S. Seidel, S. Gövert, and J. Schnieders, “Im geschlossenen Werkzeug aufgeblasen,” Kunststoffe, vol. 104, no. 5, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27347
E. Moritzer and S. Seidel, “Influence of Process Parameters on Wall Thickness Distribution During the Initial Step of the Direct GITBlow Process,” presented at the 30th International Conference of The Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27350
E. Moritzer and J. Krugmann, “Molded-On Mechanical Fastener Ensures Uniform Force Transmission and Sealing of the Joint Surface: Joining Parts Together with the Aid of Self-Tapping Screws,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27351
E. Moritzer and R. Kleeschulte, “Nicht nur gleich und gleich gesellt sich gern,” Kunststoffe, vol. 104, no. 8, pp. 50–53, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27352
E. Moritzer and J. Krugmann, “Nutzung der Materialdeformation zur Entwicklung eines neuartigen Kunststoffblindniets,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27355
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics, vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27358
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27359
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Polypropylene Composite Sheet and Short-Fiber Thermoplastic,” presented at the Euro Hybrid Materials and Systems 2014 (EHMS), Stade (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27362
E. Moritzer and G. Heiderich, “Vom Reststoff zum hochtechnischen Spritzgießkunststoff - Recyclingtechnologie für thermoplastische endlosfaserverstärkte Kunststoffe,” Ingenieurspiegel - Fachmagazin für Ingenieure, vol. 1, no. 3, pp. 50–52, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat
| DOI
283 Publications
2018 | Conference Paper | LibreCat-ID: 26951
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, and S. S. Asad, “Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen,” presented at the 17. EWIKON Heißkanal-Forum, Frankenberg (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26953
E. Moritzer and G. Heiderich, “Investigation on the Fiber Compounding with a New Type of Compounding Machine,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26961
E. Moritzer, C. Budde, and D. Krassmann, “Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26963
E. Moritzer, G. Heiderich, and M. Wittke, “Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26969
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26970
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26971
E. Moritzer and M. Wittke, “Synergies from the Screw,” Kunststoffe International, no. 12/2018, pp. 34–37, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26972
E. Moritzer and M. Wittke, “Syngerien aus der Schnecke,” Kunststoffe, no. 12/2018, pp. 69–72, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26974
E. Moritzer and T. Nordmeyer, “System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes,” presented at the Joining in Car Body Engineering 2018, Bad Nauheim (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26975
E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26977
E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Book Chapter | LibreCat-ID: 26979
E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen,” in Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
2017 | Conference Paper | LibreCat-ID: 25578
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 24529
E. Moritzer and M. Hopp, “Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes,” 2017.
LibreCat
2017 | Conference (Editor) | LibreCat-ID: 25739
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27200
E. Moritzer and T. Westhues, “Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27203
E. Moritzer and B. Landgräber, “Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27204
E. Moritzer, C. Budde, and M. Hüttner, “Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27206
E. Moritzer and T. Nordmeyer, “Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths,” presented at the 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27209
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27212
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27215
E. Moritzer, G. Heiderich, and A. Hirsch, “Fiber Length Reduction during Injection Molding,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27218
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline Surface Activation in the Injection Molding Process for High Adhesive Strength,” adhesion ADHESIVES & SEALANTS, no. 14. Jg. Heft 4, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27219
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten,” Adhäsion, no. 61. Jg. Heft 10, pp. 46–51, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27223
E. Moritzer and B. Landgräber, “Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27224
E. Moritzer, J. Krugmann, and C. Leister, “Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?,” Kunststoffe erfolgreich kleben, no. 1, pp. 81–86, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27225
E. Moritzer, N. Friedrich, and J. Berger, “Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig. ,” Kunststoffe erfolgreich kleben, no. 1, pp. 213–221, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27229
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27230
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27243
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, no. 8. Jg. Heft 8, p. 246, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27244
E. Moritzer et al., “Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen,” Ingenieurspiegel - Fachmagazin für Ingenieure, no. 5. Jg. Heft 3, pp. 52–54, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 27246
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “An Approach to Non-Destructive Testing of Aged Polymers,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27250
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers,” Kunststoffe international, no. 10. Jg. Heft 4, pp. 43–45, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27251
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske, “Development of an Inline Plasma Treatment During Injection Molding Process,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27252
E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27253
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27254
E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length Degradation in Injection Moulds,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27255
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27256
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27257
E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer Processing,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27259
E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft 2, pp. 54–58, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27260
E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,” Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27264
E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess,” Kunststofftechnik - Spritzgießen 2016, no. 1, pp. 27–39, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27267
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren,” Kunststoffe, no. 106. Jg. Heft 6, pp. 94–96, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27269
E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27276
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, and M. Webersen, “The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27278
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ultraschallbasierte Charakterisierung von gealterten Polymeren,” Jahresmagazin Kunststofftechnik, pp. 98–103, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27279
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren,” presented at the 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 24530
E. Moritzer and M. Hopp, “Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications,” 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27292
E. Moritzer, C. Budde, and M. Hüttner, “Wie Kurz- und Endlosfasern sich am besten vertragen,” Kunststoffe, vol. 105, no. 3, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27295
E. Moritzer, C. Leister, and T. Nordmeyer, “Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma,” Zeitschrift Kunststofftechnik, vol. 11, no. 4, pp. 205–226, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27297
E. Moritzer, R. Kleeschulte, S. Pollmann, and K. Anger, “Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time,” presented at the Europe-Africa Conference of the Polymer Processing Society, Graz (Österreich), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27304
E. Moritzer and C. Budde, “Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27309
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, and A. Knospe, “Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet,” presented at the 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27312
E. Moritzer and C. Budde, “Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers,” presented at the DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27313
E. Moritzer and G. Heiderich, “Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27317
E. Moritzer and S. Seidel, “Numerical Analysis and Evaluation of Process and Geometry Specific Transient Temperature Fields for a New Variation of Gas-Assisted Injection Molding,” International Polymer Processing, vol. 30, no. 2, pp. 265–275, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27326
E. Moritzer, J. Leßmann, T. Plugge, and S. Seidel, “Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, pp. 69–102, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27327
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, and M. Bastian, “Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen,” presented at the 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
2014 | Conference Paper | LibreCat-ID: 24532
E. Moritzer and M. Hopp, “The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC),” 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27328
E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” Welding in the World, vol. 58, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27330
E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27333
E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27335
E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27336
E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” Joining Plastics, vol. 8, no. 3, pp. 178–182, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27339
E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27340
E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27343
E. Moritzer and C. Budde, “Hybrid Lightweight Construction of a Chassis Frame Structure,” presented at the Polymers and Energy, Jena (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27345
E. Moritzer, S. Seidel, S. Gövert, and J. Schnieders, “Im geschlossenen Werkzeug aufgeblasen,” Kunststoffe, vol. 104, no. 5, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27347
E. Moritzer and S. Seidel, “Influence of Process Parameters on Wall Thickness Distribution During the Initial Step of the Direct GITBlow Process,” presented at the 30th International Conference of The Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27350
E. Moritzer and J. Krugmann, “Molded-On Mechanical Fastener Ensures Uniform Force Transmission and Sealing of the Joint Surface: Joining Parts Together with the Aid of Self-Tapping Screws,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27351
E. Moritzer and R. Kleeschulte, “Nicht nur gleich und gleich gesellt sich gern,” Kunststoffe, vol. 104, no. 8, pp. 50–53, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27352
E. Moritzer and J. Krugmann, “Nutzung der Materialdeformation zur Entwicklung eines neuartigen Kunststoffblindniets,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27355
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics, vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27358
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27359
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Polypropylene Composite Sheet and Short-Fiber Thermoplastic,” presented at the Euro Hybrid Materials and Systems 2014 (EHMS), Stade (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27362
E. Moritzer and G. Heiderich, “Vom Reststoff zum hochtechnischen Spritzgießkunststoff - Recyclingtechnologie für thermoplastische endlosfaserverstärkte Kunststoffe,” Ingenieurspiegel - Fachmagazin für Ingenieure, vol. 1, no. 3, pp. 50–52, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat
| DOI