214 Publications

Mark all

[214]
2022 | Report | LibreCat-ID: 33070
Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen
A. Fuhrmann, R. Schoch, A. Rusam, M. Bosse, F. Flachmann, E. Moritzer, T. Hochrein, M. Bastian, Verbessertes Füllverhalten Im Spritzgießprozess Durch Schäumen von WPC: Bewertung Des Fließverhaltens Treibmittelbeladener Polymerschmelzen, Shaker, 2022.
LibreCat
 
[213]
2022 | Conference Paper | LibreCat-ID: 33288
Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process
E. Moritzer, F.I. Bürenhaus, in: 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
 
[212]
2022 | Conference Paper | LibreCat-ID: 33290
Multimaterial Injection Moulding of Thermosets and Elastomers
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, U. Giese, in: ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
 
[211]
2022 | Newspaper Article | LibreCat-ID: 33287
Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS
E. Moritzer, C. Held, J. Hillemeyer, Joining Plastic (2022) 84–90.
LibreCat
 
[210]
2022 | Newspaper Article | LibreCat-ID: 33292
Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, U. Giese, Kunststoffland NRW (2022) 34–35.
LibreCat
 
[209]
2022 | Newspaper Article | LibreCat-ID: 33289
Mit der richtigen Auslegung zur sicheren Verbindung
E. Moritzer, C. Held, C. Hopmann, M. Kramer, Kunststoffe (2022) 30–33.
LibreCat
 
[208]
2022 | Newspaper Article | LibreCat-ID: 33291
Plasmaaktivierung fehlgeschlagen!
E. Moritzer, D. Rauen, Kunststoffe (2022) 79–81.
LibreCat
 
[207]
2022 | Conference Paper | LibreCat-ID: 33296 LibreCat
 
[206]
2022 | Journal Article | LibreCat-ID: 33856
Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science 6 (2022).
LibreCat | DOI
 
 
[204]
 
[203]
2022 | Conference Paper | LibreCat-ID: 33852 | OA
VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
LibreCat | Download (ext.)
 
[202]
2022 | Conference Paper | LibreCat-ID: 33853 | OA
INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat | Download (ext.)
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33987
Mit Gestaltungsrichtlinien zum Erfolg
E. Moritzer, C.L. Elsner, Kunststoffe 11/2022 (2022).
LibreCat
 
[200]
2021 | Conference Paper | LibreCat-ID: 25576
Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
LibreCat
 
[199]
2021 | Journal Article | LibreCat-ID: 25577
Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
LibreCat
 
[198]
2021 | Newspaper Article | LibreCat-ID: 24095 | OA
Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
LibreCat | Download (ext.)
 
[197]
2021 | Journal Article | LibreCat-ID: 24161 LibreCat
 
[196]
2021 | Conference Paper | LibreCat-ID: 24165 LibreCat
 
[195]
2021 | Journal Article | LibreCat-ID: 24168
Einfluss eines beheizten Bauraums auf die Schweißnahtqualität
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
LibreCat
 
[194]
2021 | Newspaper Article | LibreCat-ID: 24556
Kleine Tropfen, große Wirkung
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
LibreCat
 
[193]
2021 | Conference Paper | LibreCat-ID: 26390
Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC)
E. Moritzer, F. Flachmann, in: PPS-36 Proceedings, 2021.
LibreCat
 
[192]
2021 | Newspaper Article | LibreCat-ID: 27366
Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
LibreCat | Download (ext.)
 
[191]
2021 | Conference Paper | LibreCat-ID: 23851
Influence of Processing Parameters on Fiber Length Degradation during Injection Molding
E. Moritzer, F.I. Bürenhaus, in: SPE ANTEC 2021 Proceedings, 2021.
LibreCat
 
[190]
2021 | Conference Paper | LibreCat-ID: 23746
Influence of Chemical Blowing Agents on the Filling Behavior of Wood-Plastic-Composite Melts
E. Moritzer, F. Flachmann, in: SPE ANTEC 2021: The Annual Technical Conference for Plastic Professionals, 2021, pp. 536–540.
LibreCat
 
[189]
2021 | Journal Article | LibreCat-ID: 26854
Die Fließfront darf nicht brechen
E. Moritzer, F. Flachmann, Kunststoffe 12 (2021) 42–44.
LibreCat
 
[188]
2021 | Newspaper Article | LibreCat-ID: 31707
Direktverschraubung von Duroplasten Eine wirtschaftliche Lösung
E. Moritzer, J. Hillemeyer, M. Kramer, C. Hopmann, Plastverarbeiter (2021) 56–60.
LibreCat
 
[187]
2021 | Newspaper Article | LibreCat-ID: 31725
Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer
E. Moritzer, M. Wortmann, K. Viertel, A. Welle, W. Keil, N. Frese, W. Hachmann, P. Krieger, J. Brikmann, C. Schmidt, B. Hüsgen, International Journal of Heat  and Mass Transfer (2021).
LibreCat
 
[186]
2021 | Conference Paper | LibreCat-ID: 25283
Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36), n.d.
LibreCat | Files available
 
[185]
2021 | Conference Paper | LibreCat-ID: 24101 | OA
Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 467–474.
LibreCat | Download (ext.)
 
[184]
2021 | Conference Paper | LibreCat-ID: 24099 | OA
Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling
E. Moritzer, F. Hecker, C. Driediger, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 575–584.
LibreCat | Download (ext.)
 
[183]
2021 | Conference Paper | LibreCat-ID: 24096 | OA
Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
LibreCat | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 23944
Characterization of wood-filled thermoplastic polyurethane for the injection modling process
E. Moritzer, M. Richters, Journal of Applied Polymer Science (2021).
LibreCat
 
[181]
2021 | Journal Article | LibreCat-ID: 23948
Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden
E. Moritzer, M. Richters, J. Hillemeyer, D. Krassmann, Joining Plastics (2021).
LibreCat
 
[180]
2021 | Book | LibreCat-ID: 22032
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability, Springer, 2021.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 24162
Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK
E. Moritzer, J. Wächter, C.L. Elsner, Macromolecular Symposia 395 (2021).
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24681 LibreCat | DOI
 
[177]
2021 | Conference Paper | LibreCat-ID: 24554
Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems
E. Moritzer, C.L. Elsner, J. Wächter, F. Knoop, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
 
[176]
2021 | Journal Article | LibreCat-ID: 24555
Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters
E. Moritzer, C.L. Elsner, C. Schumacher, Polymer Composites 42 (2021) 6065–6079.
LibreCat | DOI
 
[175]
2021 | Newspaper Article | LibreCat-ID: 31744
Designing of thermosetting plastic components for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung
E. Moritzer, J. Hillemeyer, M. Kramer, C. Hopmann, Joining Plastics (2021) 94–103.
LibreCat
 
[174]
2021 | Newspaper Article | LibreCat-ID: 31740
Characterization of wood-filled thermoplastic polyurethanes for the injection molding process
E. Moritzer, M. Richters, Journal of Applied Polymer Science 138 (2021).
LibreCat
 
[173]
2021 | Conference Paper | LibreCat-ID: 31760
Entwicklung der Spritzniettechnik als werkstoffgerechtes Fügeverfahren für hybride Strukturen
E. Moritzer, D. Krassmann, J. Brikmann, in: 11. Fügetechnisches  Gemeinschaftskolloquium, Dresden, 2021.
LibreCat
 
[172]
2021 | Newspaper Article | LibreCat-ID: 31762 LibreCat
 
[171]
2021 | Newspaper Article | LibreCat-ID: 31757 LibreCat
 
[170]
2021 | Newspaper Article | LibreCat-ID: 31765 LibreCat
 
[169]
2021 | Newspaper Article | LibreCat-ID: 31769
Injection Molding of Wood-Filled Thermoplastic Polyurethane
E. Moritzer, M. Richters, Journal of  Composites Science (2021).
LibreCat
 
[168]
2021 | Newspaper Article | LibreCat-ID: 31763
Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, N. Frese, ACS Omega (2021).
LibreCat
 
[167]
2021 | Conference Paper | LibreCat-ID: 31774
INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR
E. Moritzer, J. Wächter, C. Fuhrmann, in: 23rd International Conference Materials, Burgas (Bulgarien), 2021, pp. 58–67.
LibreCat
 
[166]
2021 | Newspaper Article | LibreCat-ID: 31775
Kühlen mit dem Wärmerohr
E. Moritzer, Kunststoffe (2021) 64–67.
LibreCat
 
[165]
2021 | Conference Paper | LibreCat-ID: 31781
Untersuchung der Faserlängenabnahme von kurz- und langglasfaserverstärk-ten Thermoplasten im Spritzgießprozess
E. Moritzer, F.I. Bürenhaus, in: 27. Techomer - Fachtagung Über  Verarbeitung Und Anwendung von Polymeren, Chemnitz (Online), 2021.
LibreCat
 
[164]
2021 | Newspaper Article | LibreCat-ID: 31778 LibreCat
 
[163]
2021 | Newspaper Article | LibreCat-ID: 31780
Silicone Mold Accuracy in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, N. Frese, J. Brinkmann, A. Ehrmann, B. Hüsgen, Macromolecular Symposia (2021).
LibreCat
 
[162]
2021 | Conference Abstract | LibreCat-ID: 31771
Investigation of Fiber Orientation and its Influence on Fiber Length Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene
E. Moritzer, F.I. Bürenhaus, in: 36th International  Conference of the Polymer Processing Society (PPS), Montréal (Kanada), 2021.
LibreCat
 
[161]
2020 | Journal Article | LibreCat-ID: 24183
Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, J. Mirasol, JOURNAL OF INDUSTRIAL TEXTILES (2020) 224–239.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 24184
2K-Haftverbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Krampe, E. Lochbaum, Plastverarbeiter (2020) 20–23.
LibreCat
 
[159]
2020 | Conference Paper | LibreCat-ID: 24201
Additive Manufactured Heat Pipe Injection Mould Element
E. Moritzer, S. Kartelmeyer, V. Hüttemann, in: Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
 
[158]
2020 | Conference Paper | LibreCat-ID: 24203
Additiveteile Direktverschrauben
E. Moritzer, J. Hillemeyer, in: 6. Fachkonferenz 3D-Druck in Der Automobielindustrie, Hamburg, 2020.
LibreCat
 
[157]
2020 | Conference Paper | LibreCat-ID: 24206
Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben
E. Moritzer, J. Hillemeyer, in: 10. Gemeinschaftskolloquium, 2020.
LibreCat
 
[156]
2020 | Journal Article | LibreCat-ID: 24208
Chemical and morphological transition of poly(acrylonitrile) / poly(vinylidene fluoride) blend nanofibers during oxidative stabilization and incipient carbonization
E. Moritzer, M. Wortmann, N. Frese, A. Mamun, M. Trabelsi, W. Keil, B. Büker, A. Javed, M. Tiemann, A. Mehrmann, A. Hütten, C. Schmidt, G. Gölzhäuser, B. Hüsgen, L. Sabantina, Nanomaterials 10(06) (2020) 1210.
LibreCat
 
[155]
2020 | Conference Paper | LibreCat-ID: 24213
CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS
E. Moritzer, M. Wittke, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
LibreCat
 
[154]
2020 | Conference Paper | LibreCat-ID: 24228
Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics
E. Moritzer, D. Krassmann, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
 
[153]
2020 | Journal Article | LibreCat-ID: 24232
Die Kunst der Entformung
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, W. Friesenbichler, Kunststoffe (2020) 60–63.
LibreCat
 
[152]
2020 | Journal Article | LibreCat-ID: 24233
EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG
E. Moritzer, M. Hopp, M. Wittke, WAK Jahreszeitschrift (2020) 2–5.
LibreCat
 
[151]
2020 | Journal Article | LibreCat-ID: 24234
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, Joining Plastics (2020) 96–103.
LibreCat
 
[150]
2020 | Conference Paper | LibreCat-ID: 24235
Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen
E. Moritzer, D. Krassmann, J. Brikmann, in: 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
 
[149]
2020 | Conference Paper | LibreCat-ID: 24237
INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT
E. Moritzer, S. Kartelmeyer, M. Hüttemann, C. Jaroschek, in: 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
 
[148]
2020 | Journal Article | LibreCat-ID: 24239
InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Lochbaum, E. Krampe, KGK - Rubberpoint (2020) 22–26.
LibreCat
 
[147]
2020 | Conference Paper | LibreCat-ID: 24242
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, in: Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
 
[146]
2020 | Journal Article | LibreCat-ID: 24246
Kostensenkung beim Mehrkomponenten-Spritzgießen
E. Moritzer, F.M. Mühlhoff, E. Krampe, Kunststoff + Verarbeitung (2020) 92–93.
LibreCat
 
[145]
2020 | Conference Paper | LibreCat-ID: 24247
Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process
E. Moritzer, J. Hillemeyer, in: 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
 
[144]
2020 | Journal Article | LibreCat-ID: 24248
Mehr Materialkombinationen, weniger Kosten
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe (2020) 39–42.
LibreCat
 
[143]
2020 | Journal Article | LibreCat-ID: 24249
Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite
E. Moritzer, M. Wittke, MNWP Magazin (2020) 26–27.
LibreCat
 
[142]
2020 | Journal Article | LibreCat-ID: 24250
More Material Combinations, Lower Costs
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe International (2020) 22–25.
LibreCat
 
[141]
2020 | Conference Paper | LibreCat-ID: 24251
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, in: DVS Congress 2020, 2020.
LibreCat
 
[140]
2020 | Journal Article | LibreCat-ID: 24252
Neue Maßstäbe in puncto Festigkeit und Faserlänge
E. Moritzer, M. Wittke, Plastverarbeiter (2020) 18–21.
LibreCat
 
[139]
2020 | Journal Article | LibreCat-ID: 24253
Plasma technology rationalizes 2-component processes
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhesion ADHESIVES + SEALANTS (2020).
LibreCat
 
[138]
2020 | Journal Article | LibreCat-ID: 24256
Plasma-Technologie zur Rationalisierung von 2K-Prozessen
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhäsion KLEBEN & DICHTEN (2020) 16–19.
LibreCat
 
[137]
2020 | Conference (Editor) | LibreCat-ID: 24259
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
 
[136]
2020 | Conference Paper | LibreCat-ID: 24260
Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting
E. Moritzer, C. Schumacher, in: 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
 
[135]
2020 | Journal Article | LibreCat-ID: 24261
The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, N. Frese, W. Keil, J. Brikmann, J. Biedinger, B. Brockhagen, G. Reiss, C. Schmidt, A. Gölzhäuser, B. Hüsgen, Applied Polymer Materials (2020).
LibreCat
 
[134]
2020 | Conference Abstract | LibreCat-ID: 24478 LibreCat
 
[133]
2020 | Book Chapter | LibreCat-ID: 24479
The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat | DOI
 
[132]
2020 | Conference (Editor) | LibreCat-ID: 25768
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, eds., Neuartige Fügetechnik Für Organoblech-Hybridverbindungen, 2020.
LibreCat
 
[131]
2020 | Conference (Editor) | LibreCat-ID: 25779
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
 
[130]
2020 | Journal Article | LibreCat-ID: 25901
Chemical and Morphological Transition of Poly(acrylonitrile)/Poly(vinylidene Fluoride) Blend Nanofibers during Oxidative Stabilization and Incipient Carbonization
M. Wortmann, N. Frese, A. Mamun, M. Trabelsi, W. Keil, B. Büker, A. Javed, M. Tiemann, E. Moritzer, A. Ehrmann, A. Hütten, C. Schmidt, A. Gölzhäuser, B. Hüsgen, L. Sabantina, Nanomaterials (2020).
LibreCat | DOI
 
[129]
2019 | Conference (Editor) | LibreCat-ID: 25580
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
 
[128]
2019 | Conference Paper | LibreCat-ID: 25582 LibreCat
 
[127]
2019 | Conference (Editor) | LibreCat-ID: 25583
Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, D. Krassmann, eds., Nieten Ohne Fügeelement Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
 
[126]
2019 | Journal Article | LibreCat-ID: 25608
New Polymers for Needleless Electrospinning from Low-Toxic Solvents
E. Moritzer, M. Wortmann, N. Frese, L. Sabantina, R. Petkau, F. Kinzel, A. Golzhauser, B. Husgen, A. Ehrmann, NANOMATERIALS (2019).
LibreCat
 
[125]
2019 | Journal Article | LibreCat-ID: 25610
Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation
E. Moritzer, M. Wortmann, A. Hoffmann, N. Frese, A. Heide, J. Brikmann, N. Brandt, M. Menzel, A. Gölzhäuser, B. Häsgen, POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019) 1937–1943.
LibreCat
 
[124]
2019 | Conference Paper | LibreCat-ID: 25611
Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, F. Woitschek, in: 45. Deutsche Jahrestagung Für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
 
[123]
2019 | Conference Paper | LibreCat-ID: 25613
Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen
E. Moritzer, T. Westhues, in: 26. Fachtagung Über Die Verarbeitung Und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
 
[122]
2019 | Conference Paper | LibreCat-ID: 25621
Charakterisierung des Arburg Kunststoff Freiformens
E. Moritzer, A. Hirsch, in: ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design Und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
 
[121]
2019 | Conference Paper | LibreCat-ID: 25624
Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC)
E. Moritzer, J. Jilg, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[120]
2019 | Conference Paper | LibreCat-ID: 25626
Direktverschraubung additiv gefertigter Kunststoffbauteile
E. Moritzer, J. Hillemeyer, in: 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[119]
2019 | Conference Paper | LibreCat-ID: 25630
Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting
E. Moritzer, J. Hillemeyer, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[118]
2019 | Journal Article | LibreCat-ID: 25631 LibreCat
 
[117]
2019 | Journal Article | LibreCat-ID: 25635
Improved abrasion resistance of textile fabrics due to polymer coatings
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, A. Ehrmann, JOURNAL OF INDUSTRIAL TEXTILES (2019) 572–583.
LibreCat
 
[116]
2019 | Conference Paper | LibreCat-ID: 25636
Influences on structural intensity for injection mouldet thermoplastic parts
E. Moritzer, D. Netzband, A. Ujma, in: 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
 
[115]
2019 | Journal Article | LibreCat-ID: 25637
Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, Wissenschaftlicher Arbeitskreis Der Universitäts-Professoren Der Kunststofftechnik (2019) 54–59.
LibreCat
 
[114]
2019 | Conference Paper | LibreCat-ID: 25638
InMould-Plasma
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, in: Eröffnung Plasma-Campus Bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
 
[113]
2019 | Journal Article | LibreCat-ID: 25639
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, PU MAGAZIN - International (2019) 320–324.
LibreCat
 
[112]
2019 | Journal Article | LibreCat-ID: 25640
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, TPE Magazine International (2019) 230–234.
LibreCat
 
[111]
2019 | Conference Paper | LibreCat-ID: 25689
Lebensdauer von Composites und Composite-Metall-Hybridverbindungen
E. Moritzer, M. Hüttner, D. Krassmann, M. Wittke, in: Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
 
[110]
2019 | Conference Paper | LibreCat-ID: 25738
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
 
[109]
2019 | Conference Paper | LibreCat-ID: 25745
Oberflächennachbearbeitung und Kleben von FDM-Bauteilen
E. Moritzer, A. Hirsch, in: DGM-Seminar Für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
 
[108]
2019 | Conference Paper | LibreCat-ID: 25747 LibreCat
 
[107]
2019 | Journal Article | LibreCat-ID: 25748
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, W. Truemper, Welding in the World (2019) 867–873.
LibreCat
 
[106]
2019 | Conference Paper | LibreCat-ID: 25755
Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders
E. Moritzer, M. Wittke, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[105]
2019 | Conference Paper | LibreCat-ID: 25756
Spritzgießwerkzeuge mit Heatpipe-Temperierung
E. Moritzer, S. Kartelmeyer, B. Hüttemann, C. Jaroschek, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[104]
2019 | Journal Article | LibreCat-ID: 25757 LibreCat
 
[103]
2019 | Conference Paper | LibreCat-ID: 25760
Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC)
E. Moritzer, J. Jilg, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[102]
2019 | Journal Article | LibreCat-ID: 23844 LibreCat | DOI
 
[101]
2019 | Newspaper Article | LibreCat-ID: 23845
Advancing into New Dimensions
E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe Internationl 109 (2019) 48–52.
LibreCat | PubMed | Europe PMC
 
[100]
2019 | Newspaper Article | LibreCat-ID: 23850
Vorstoß in neue Dimensionen
E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe 109 (2019) 68–72.
LibreCat
 
[99]
2019 | Conference Paper | LibreCat-ID: 22022
Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength
E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 856–863.
LibreCat | DOI
 
[98]
2019 | Conference Paper | LibreCat-ID: 22041
Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components
E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 705–714.
LibreCat | DOI
 
[97]
2019 | Journal Article | LibreCat-ID: 22047
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the World 63 (2019) 867–873.
LibreCat | DOI
 
[96]
2019 | Conference Paper | LibreCat-ID: 22028
Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures
E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat | DOI
 
[95]
2019 | Book | LibreCat-ID: 22026
Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung
E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
LibreCat | DOI
 
[94]
2018 | Conference Paper | LibreCat-ID: 25784
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2018.
LibreCat
 
[93]
2018 | Conference Paper | LibreCat-ID: 25785
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2018.
LibreCat
 
[92]
2018 | Conference (Editor) | LibreCat-ID: 25787
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neuartige Fügetechnik Für Organoblech-Metall-Hybridverbindungen, 2018.
LibreCat
 
[91]
2018 | Conference (Editor) | LibreCat-ID: 25788
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Stempelnieten Als Neuartige Fügetechnik Für Organoblech-Metall-Hybridverbindungen, 2018.
LibreCat
 
[90]
2018 | Conference Paper | LibreCat-ID: 25790
Neue Methoden zum Fügen von Organoblechen
E. Moritzer, C. Budde, D. Krassmann, in: 2018.
LibreCat
 
[89]
2018 | Conference Paper | LibreCat-ID: 26937
Charakterisierung des Arburg Kunststoff Freiformens
E. Moritzer, A. Hirsch, in: 2018.
LibreCat
 
[88]
2018 | Conference Paper | LibreCat-ID: 26938
Dauerschwinguntersuchungen an FDM-Verstärkungsstrukturen
E. Moritzer, A. Hirsch, S. Paulus, in: 3. Tagung Des DVM-Arbeitskreises Additiv Gefertigte Bauteile Und Strukturen, 2018.
LibreCat
 
[87]
2018 | Journal Article | LibreCat-ID: 26939
Die effiziente Materialentwicklung mittels Spritzgießdirektcompoundierung (SGDC)
E. Moritzer, J. Jilg, Y. Martin, E. Müller, Zeitschrift Kunststofftechnik / Journal of Plastics Technology 14. Jg. Heft 1 (2018) 1–34.
LibreCat
 
[86]
2018 | Journal Article | LibreCat-ID: 26941
Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints
E. Moritzer, T. Nordmeyer, Welding in the World 62. Jg. Heft 3 (2018) 601–608.
LibreCat
 
[85]
2018 | Journal Article | LibreCat-ID: 26942 LibreCat
 
[84]
2018 | Journal Article | LibreCat-ID: 26946
Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising During Vacuum Castin Processes
E. Moritzer, M. Wortmann, N. Frese, A. Heide, J. Brinkmann, O. Strube, R. Dalpke, A. Gölzhausen, B. Hüsgen, Polymer-Plastics Technology and Engineering 57. Jg. Heft 15 (2018) 1524–1529.
LibreCat
 
[83]
2018 | Journal Article | LibreCat-ID: 26948
Glasfaseragglomerate im Visier - eine Zerreißprobe
E. Moritzer, J. Jilg, A. Neunhäuserer, W. Friesenbichler, Kunststoffe 108. Jg. (2018) 48–52.
LibreCat
 
[82]
2018 | Conference Paper | LibreCat-ID: 26949
Inflation Behavior of Preforms in the Special Injection Molding Process GITBlow Combining Gas Assisted Injection Molding and Blow Molding
E. Moritzer, B. Landgräber, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[81]
2018 | Conference Paper | LibreCat-ID: 26951
Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, S.S. Asad, in: 17. EWIKON Heißkanal-Forum, 2018.
LibreCat
 
[80]
2018 | Conference Paper | LibreCat-ID: 26953
Investigation on the Fiber Compounding with a New Type of Compounding Machine
E. Moritzer, G. Heiderich, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[79]
2018 | Conference Paper | LibreCat-ID: 26961
Neue Methoden zum Fügen von Organoblechen
E. Moritzer, C. Budde, D. Krassmann, in: Fügen von Kunststoffen Im Automobil 2018, 2018.
LibreCat
 
[78]
2018 | Conference Paper | LibreCat-ID: 26963
Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates
E. Moritzer, G. Heiderich, M. Wittke, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[77]
2018 | Conference Paper | LibreCat-ID: 26969
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 8. Fügetechnisches Gemeinschaftskolloquium, 2018.
LibreCat
 
[76]
2018 | Conference Paper | LibreCat-ID: 26970
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 8. Fügetechnisches Gemeinschaftskolloquium, 2018.
LibreCat
 
[75]
2018 | Journal Article | LibreCat-ID: 26971
Synergies from the Screw
E. Moritzer, M. Wittke, Kunststoffe International (2018) 34–37.
LibreCat
 
[74]
2018 | Journal Article | LibreCat-ID: 26972
Syngerien aus der Schnecke
E. Moritzer, M. Wittke, Kunststoffe (2018) 69–72.
LibreCat
 
[73]
2018 | Conference Paper | LibreCat-ID: 26974
System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes
E. Moritzer, T. Nordmeyer, in: Joining in Car Body Engineering 2018, 2018.
LibreCat
 
[72]
2018 | Conference Paper | LibreCat-ID: 26975
The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets
E. Moritzer, A. Hirsch, M. Hüttner, J. Wächter, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[71]
2018 | Conference Paper | LibreCat-ID: 26977
The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics
E. Moritzer, M. Hüttner, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[70]
2018 | Book Chapter | LibreCat-ID: 26979
Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen
E. Moritzer, B. Landgräber, in: Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
 
[69]
2017 | Conference Paper | LibreCat-ID: 25578
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2017.
LibreCat
 
[68]
2017 | Conference Paper | LibreCat-ID: 24529
Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes
E. Moritzer, M. Hopp, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim, USA, 2017.
LibreCat
 
[67]
2017 | Conference (Editor) | LibreCat-ID: 25739
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Entwicklung Einer Neuartigen Fügetechnik Für Organoblech-Hybridverbindungen, 2017.
LibreCat
 
[66]
2017 | Conference Paper | LibreCat-ID: 27200
Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung
E. Moritzer, T. Westhues, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[65]
2017 | Conference Paper | LibreCat-ID: 27203
Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding
E. Moritzer, B. Landgräber, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[64]
2017 | Conference Paper | LibreCat-ID: 27204
Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, in: Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[63]
2017 | Conference Paper | LibreCat-ID: 27206
Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths
E. Moritzer, T. Nordmeyer, in: 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
 
[62]
2017 | Conference Paper | LibreCat-ID: 27209
Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints
E. Moritzer, T. Nordmeyer, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[61]
2017 | Conference Paper | LibreCat-ID: 27212
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
 
[60]
2017 | Conference Paper | LibreCat-ID: 27215
Fiber Length Reduction during Injection Molding
E. Moritzer, G. Heiderich, A. Hirsch, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[59]
2017 | Journal Article | LibreCat-ID: 27218
Inline Surface Activation in the Injection Molding Process for High Adhesive Strength
E. Moritzer, T. Nordmeyer, M. Häußler, Adhesion ADHESIVES & SEALANTS (2017).
LibreCat
 
[58]
2017 | Journal Article | LibreCat-ID: 27219
Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten
E. Moritzer, T. Nordmeyer, M. Häußler, Adhäsion (2017) 46–51.
LibreCat
 
[57]
2017 | Conference Paper | LibreCat-ID: 27223
Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[56]
2017 | Journal Article | LibreCat-ID: 27224
Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?
E. Moritzer, J. Krugmann, C. Leister, Kunststoffe Erfolgreich Kleben (2017) 81–86.
LibreCat
 
[55]
2017 | Journal Article | LibreCat-ID: 27225
Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig.
E. Moritzer, N. Friedrich, J. Berger, Kunststoffe Erfolgreich Kleben (2017) 213–221.
LibreCat
 
[54]
2017 | Conference Paper | LibreCat-ID: 27229
Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, Y. Martin, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[53]
2017 | Conference Paper | LibreCat-ID: 27230
Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, Y. Martin, in: 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
 
[52]
2017 | Journal Article | LibreCat-ID: 27243
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A. Lasagni, Micromachines (2017) 246.
LibreCat
 
[51]
2017 | Journal Article | LibreCat-ID: 27244
Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen
E. Moritzer, M. Wortmann, N. Frese, A. Heide, O. Strube, A. Gölzhausne, B. Hüsgen, Ingenieurspiegel - Fachmagazin Für Ingenieure (2017) 52–54.
LibreCat
 
[50]
2017 | Journal Article | LibreCat-ID: 22038
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni, Micromachines 8 (2017).
LibreCat | DOI
 
[49]
2016 | Conference Paper | LibreCat-ID: 27246
An Approach to Non-Destructive Testing of Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[48]
2016 | Journal Article | LibreCat-ID: 27250
Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe International (2016) 43–45.
LibreCat
 
[47]
2016 | Conference Paper | LibreCat-ID: 27251
Development of an Inline Plasma Treatment During Injection Molding Process
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[46]
2016 | Conference Paper | LibreCat-ID: 27252
Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints
E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
 
[45]
2016 | Conference Paper | LibreCat-ID: 27253
Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
 
[44]
2016 | Conference Paper | LibreCat-ID: 27254
Experimental Investigations on the Fibre Length Degradation in Injection Moulds
E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[43]
2016 | Conference Paper | LibreCat-ID: 27255
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[42]
2016 | Conference Paper | LibreCat-ID: 27256
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
 
[41]
2016 | Conference Paper | LibreCat-ID: 27257
Fiber Length Reduction during Shearing in Polymer Processing
E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[40]
2016 | Journal Article | LibreCat-ID: 27259 LibreCat
 
[39]
2016 | Journal Article | LibreCat-ID: 27260
In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern
E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier, S. Waschke, Kunststoffe (2016) 70–72.
LibreCat
 
[38]
2016 | Journal Article | LibreCat-ID: 27264
Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess
E. Moritzer, Y. Martin, E. Müller, Kunststofftechnik - Spritzgießen 2016 (2016) 27–39.
LibreCat
 
[37]
2016 | Journal Article | LibreCat-ID: 27267 LibreCat
 
[36]
2016 | Conference Paper | LibreCat-ID: 27269
Organoblechnieten
E. Moritzer, C. Budde, M. Hüttner, in: 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
 
[35]
2016 | Journal Article | LibreCat-ID: 27271
Plasmaunterstütztes Fügen von Kunststoffen
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
LibreCat
 
[34]
2016 | Conference Paper | LibreCat-ID: 27276
The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, M. Webersen, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[33]
2016 | Journal Article | LibreCat-ID: 27278
Ultraschallbasierte Charakterisierung von gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Jahresmagazin Kunststofftechnik (2016) 98–103.
LibreCat
 
[32]
2016 | Conference Paper | LibreCat-ID: 27279
Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 18. GMA/ITG Fachtagung Sensoren Und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
 
[31]
2016 | Journal Article | LibreCat-ID: 22025
Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme
E. Moritzer, A. Hirsch, K. Günther, S. Teutoburg-Weiss, A.F. Lasagni, U. Klotzbach, F. Sonntag, 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ 6 (2016) 65–70.
LibreCat
 
[30]
2015 | Conference Paper | LibreCat-ID: 24530
Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications
E. Moritzer, M. Hopp, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki, Finnland, 2015.
LibreCat
 
[29]
2015 | Newspaper Article | LibreCat-ID: 27292
Wie Kurz- und Endlosfasern sich am besten vertragen
E. Moritzer, C. Budde, M. Hüttner, Kunststoffe 105 (2015).
LibreCat
 
[28]
2015 | Newspaper Article | LibreCat-ID: 27295
Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma
E. Moritzer, C. Leister, T. Nordmeyer, Zeitschrift Kunststofftechnik 11 (2015) 205–226.
LibreCat
 
[27]
2015 | Conference Paper | LibreCat-ID: 27297
Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time
E. Moritzer, R. Kleeschulte, S. Pollmann, K. Anger, in: Europe-Africa Conference of the Polymer Processing Society, Graz (Österrreich), 2015.
LibreCat
 
[26]
2015 | Conference Paper | LibreCat-ID: 27304
Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic
E. Moritzer, C. Budde, in: 20. Symposium Verbundwerkstoffe Und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
 
[25]
2015 | Conference Paper | LibreCat-ID: 27309
Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, A. Knospe, in: 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[24]
2015 | Conference Paper | LibreCat-ID: 27312
Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers
E. Moritzer, C. Budde, in: DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
 
[23]
2015 | Conference Paper | LibreCat-ID: 27313
Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets
E. Moritzer, G. Heiderich, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[22]
2015 | Newspaper Article | LibreCat-ID: 27317 LibreCat
 
[21]
2015 | Newspaper Article | LibreCat-ID: 27326
Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität
E. Moritzer, J. Leßmann, T. Plugge, S. Seidel, Zeitschrift Kunststofftechnik / Journal of Plastics Technology 11 (2015) 69–102.
LibreCat
 
[20]
2015 | Conference Paper | LibreCat-ID: 27327
Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, M. Bastian, in: 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 24532
The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC)
E. Moritzer, M. Hopp, in: 67th Annual Assembly of the International Institute of Welding (IIW), Seoul, Südkorea, 2014.
LibreCat
 
[18]
2014 | Newspaper Article | LibreCat-ID: 27328 LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27330
Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine
E. Moritzer, Y. Martin, E. Müller, R. Kleeschulte, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[16]
2014 | Conference Paper | LibreCat-ID: 27333
Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process
E. Moritzer, S. Seidel, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27335
Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow
E. Moritzer, in: WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed

214 Publications

Mark all

[214]
2022 | Report | LibreCat-ID: 33070
Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen
A. Fuhrmann, R. Schoch, A. Rusam, M. Bosse, F. Flachmann, E. Moritzer, T. Hochrein, M. Bastian, Verbessertes Füllverhalten Im Spritzgießprozess Durch Schäumen von WPC: Bewertung Des Fließverhaltens Treibmittelbeladener Polymerschmelzen, Shaker, 2022.
LibreCat
 
[213]
2022 | Conference Paper | LibreCat-ID: 33288
Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process
E. Moritzer, F.I. Bürenhaus, in: 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
 
[212]
2022 | Conference Paper | LibreCat-ID: 33290
Multimaterial Injection Moulding of Thermosets and Elastomers
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, U. Giese, in: ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
 
[211]
2022 | Newspaper Article | LibreCat-ID: 33287
Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS
E. Moritzer, C. Held, J. Hillemeyer, Joining Plastic (2022) 84–90.
LibreCat
 
[210]
2022 | Newspaper Article | LibreCat-ID: 33292
Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, U. Giese, Kunststoffland NRW (2022) 34–35.
LibreCat
 
[209]
2022 | Newspaper Article | LibreCat-ID: 33289
Mit der richtigen Auslegung zur sicheren Verbindung
E. Moritzer, C. Held, C. Hopmann, M. Kramer, Kunststoffe (2022) 30–33.
LibreCat
 
[208]
2022 | Newspaper Article | LibreCat-ID: 33291
Plasmaaktivierung fehlgeschlagen!
E. Moritzer, D. Rauen, Kunststoffe (2022) 79–81.
LibreCat
 
[207]
2022 | Conference Paper | LibreCat-ID: 33296 LibreCat
 
[206]
2022 | Journal Article | LibreCat-ID: 33856
Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science 6 (2022).
LibreCat | DOI
 
 
[204]
 
[203]
2022 | Conference Paper | LibreCat-ID: 33852 | OA
VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
LibreCat | Download (ext.)
 
[202]
2022 | Conference Paper | LibreCat-ID: 33853 | OA
INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat | Download (ext.)
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33987
Mit Gestaltungsrichtlinien zum Erfolg
E. Moritzer, C.L. Elsner, Kunststoffe 11/2022 (2022).
LibreCat
 
[200]
2021 | Conference Paper | LibreCat-ID: 25576
Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
LibreCat
 
[199]
2021 | Journal Article | LibreCat-ID: 25577
Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
LibreCat
 
[198]
2021 | Newspaper Article | LibreCat-ID: 24095 | OA
Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
LibreCat | Download (ext.)
 
[197]
2021 | Journal Article | LibreCat-ID: 24161 LibreCat
 
[196]
2021 | Conference Paper | LibreCat-ID: 24165 LibreCat
 
[195]
2021 | Journal Article | LibreCat-ID: 24168
Einfluss eines beheizten Bauraums auf die Schweißnahtqualität
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
LibreCat
 
[194]
2021 | Newspaper Article | LibreCat-ID: 24556
Kleine Tropfen, große Wirkung
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
LibreCat
 
[193]
2021 | Conference Paper | LibreCat-ID: 26390
Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC)
E. Moritzer, F. Flachmann, in: PPS-36 Proceedings, 2021.
LibreCat
 
[192]
2021 | Newspaper Article | LibreCat-ID: 27366
Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
LibreCat | Download (ext.)
 
[191]
2021 | Conference Paper | LibreCat-ID: 23851
Influence of Processing Parameters on Fiber Length Degradation during Injection Molding
E. Moritzer, F.I. Bürenhaus, in: SPE ANTEC 2021 Proceedings, 2021.
LibreCat
 
[190]
2021 | Conference Paper | LibreCat-ID: 23746
Influence of Chemical Blowing Agents on the Filling Behavior of Wood-Plastic-Composite Melts
E. Moritzer, F. Flachmann, in: SPE ANTEC 2021: The Annual Technical Conference for Plastic Professionals, 2021, pp. 536–540.
LibreCat
 
[189]
2021 | Journal Article | LibreCat-ID: 26854
Die Fließfront darf nicht brechen
E. Moritzer, F. Flachmann, Kunststoffe 12 (2021) 42–44.
LibreCat
 
[188]
2021 | Newspaper Article | LibreCat-ID: 31707
Direktverschraubung von Duroplasten Eine wirtschaftliche Lösung
E. Moritzer, J. Hillemeyer, M. Kramer, C. Hopmann, Plastverarbeiter (2021) 56–60.
LibreCat
 
[187]
2021 | Newspaper Article | LibreCat-ID: 31725
Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer
E. Moritzer, M. Wortmann, K. Viertel, A. Welle, W. Keil, N. Frese, W. Hachmann, P. Krieger, J. Brikmann, C. Schmidt, B. Hüsgen, International Journal of Heat  and Mass Transfer (2021).
LibreCat
 
[186]
2021 | Conference Paper | LibreCat-ID: 25283
Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36), n.d.
LibreCat | Files available
 
[185]
2021 | Conference Paper | LibreCat-ID: 24101 | OA
Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 467–474.
LibreCat | Download (ext.)
 
[184]
2021 | Conference Paper | LibreCat-ID: 24099 | OA
Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling
E. Moritzer, F. Hecker, C. Driediger, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 575–584.
LibreCat | Download (ext.)
 
[183]
2021 | Conference Paper | LibreCat-ID: 24096 | OA
Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
LibreCat | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 23944
Characterization of wood-filled thermoplastic polyurethane for the injection modling process
E. Moritzer, M. Richters, Journal of Applied Polymer Science (2021).
LibreCat
 
[181]
2021 | Journal Article | LibreCat-ID: 23948
Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden
E. Moritzer, M. Richters, J. Hillemeyer, D. Krassmann, Joining Plastics (2021).
LibreCat
 
[180]
2021 | Book | LibreCat-ID: 22032
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability, Springer, 2021.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 24162
Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK
E. Moritzer, J. Wächter, C.L. Elsner, Macromolecular Symposia 395 (2021).
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24681 LibreCat | DOI
 
[177]
2021 | Conference Paper | LibreCat-ID: 24554
Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems
E. Moritzer, C.L. Elsner, J. Wächter, F. Knoop, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
 
[176]
2021 | Journal Article | LibreCat-ID: 24555
Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters
E. Moritzer, C.L. Elsner, C. Schumacher, Polymer Composites 42 (2021) 6065–6079.
LibreCat | DOI
 
[175]
2021 | Newspaper Article | LibreCat-ID: 31744
Designing of thermosetting plastic components for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung
E. Moritzer, J. Hillemeyer, M. Kramer, C. Hopmann, Joining Plastics (2021) 94–103.
LibreCat
 
[174]
2021 | Newspaper Article | LibreCat-ID: 31740
Characterization of wood-filled thermoplastic polyurethanes for the injection molding process
E. Moritzer, M. Richters, Journal of Applied Polymer Science 138 (2021).
LibreCat
 
[173]
2021 | Conference Paper | LibreCat-ID: 31760
Entwicklung der Spritzniettechnik als werkstoffgerechtes Fügeverfahren für hybride Strukturen
E. Moritzer, D. Krassmann, J. Brikmann, in: 11. Fügetechnisches  Gemeinschaftskolloquium, Dresden, 2021.
LibreCat
 
[172]
2021 | Newspaper Article | LibreCat-ID: 31762 LibreCat
 
[171]
2021 | Newspaper Article | LibreCat-ID: 31757 LibreCat
 
[170]
2021 | Newspaper Article | LibreCat-ID: 31765 LibreCat
 
[169]
2021 | Newspaper Article | LibreCat-ID: 31769
Injection Molding of Wood-Filled Thermoplastic Polyurethane
E. Moritzer, M. Richters, Journal of  Composites Science (2021).
LibreCat
 
[168]
2021 | Newspaper Article | LibreCat-ID: 31763
Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, N. Frese, ACS Omega (2021).
LibreCat
 
[167]
2021 | Conference Paper | LibreCat-ID: 31774
INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR
E. Moritzer, J. Wächter, C. Fuhrmann, in: 23rd International Conference Materials, Burgas (Bulgarien), 2021, pp. 58–67.
LibreCat
 
[166]
2021 | Newspaper Article | LibreCat-ID: 31775
Kühlen mit dem Wärmerohr
E. Moritzer, Kunststoffe (2021) 64–67.
LibreCat
 
[165]
2021 | Conference Paper | LibreCat-ID: 31781
Untersuchung der Faserlängenabnahme von kurz- und langglasfaserverstärk-ten Thermoplasten im Spritzgießprozess
E. Moritzer, F.I. Bürenhaus, in: 27. Techomer - Fachtagung Über  Verarbeitung Und Anwendung von Polymeren, Chemnitz (Online), 2021.
LibreCat
 
[164]
2021 | Newspaper Article | LibreCat-ID: 31778 LibreCat
 
[163]
2021 | Newspaper Article | LibreCat-ID: 31780
Silicone Mold Accuracy in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, N. Frese, J. Brinkmann, A. Ehrmann, B. Hüsgen, Macromolecular Symposia (2021).
LibreCat
 
[162]
2021 | Conference Abstract | LibreCat-ID: 31771
Investigation of Fiber Orientation and its Influence on Fiber Length Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene
E. Moritzer, F.I. Bürenhaus, in: 36th International  Conference of the Polymer Processing Society (PPS), Montréal (Kanada), 2021.
LibreCat
 
[161]
2020 | Journal Article | LibreCat-ID: 24183
Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, J. Mirasol, JOURNAL OF INDUSTRIAL TEXTILES (2020) 224–239.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 24184
2K-Haftverbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Krampe, E. Lochbaum, Plastverarbeiter (2020) 20–23.
LibreCat
 
[159]
2020 | Conference Paper | LibreCat-ID: 24201
Additive Manufactured Heat Pipe Injection Mould Element
E. Moritzer, S. Kartelmeyer, V. Hüttemann, in: Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
 
[158]
2020 | Conference Paper | LibreCat-ID: 24203
Additiveteile Direktverschrauben
E. Moritzer, J. Hillemeyer, in: 6. Fachkonferenz 3D-Druck in Der Automobielindustrie, Hamburg, 2020.
LibreCat
 
[157]
2020 | Conference Paper | LibreCat-ID: 24206
Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben
E. Moritzer, J. Hillemeyer, in: 10. Gemeinschaftskolloquium, 2020.
LibreCat
 
[156]
2020 | Journal Article | LibreCat-ID: 24208
Chemical and morphological transition of poly(acrylonitrile) / poly(vinylidene fluoride) blend nanofibers during oxidative stabilization and incipient carbonization
E. Moritzer, M. Wortmann, N. Frese, A. Mamun, M. Trabelsi, W. Keil, B. Büker, A. Javed, M. Tiemann, A. Mehrmann, A. Hütten, C. Schmidt, G. Gölzhäuser, B. Hüsgen, L. Sabantina, Nanomaterials 10(06) (2020) 1210.
LibreCat
 
[155]
2020 | Conference Paper | LibreCat-ID: 24213
CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS
E. Moritzer, M. Wittke, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
LibreCat
 
[154]
2020 | Conference Paper | LibreCat-ID: 24228
Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics
E. Moritzer, D. Krassmann, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
 
[153]
2020 | Journal Article | LibreCat-ID: 24232
Die Kunst der Entformung
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, W. Friesenbichler, Kunststoffe (2020) 60–63.
LibreCat
 
[152]
2020 | Journal Article | LibreCat-ID: 24233
EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG
E. Moritzer, M. Hopp, M. Wittke, WAK Jahreszeitschrift (2020) 2–5.
LibreCat
 
[151]
2020 | Journal Article | LibreCat-ID: 24234
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, Joining Plastics (2020) 96–103.
LibreCat
 
[150]
2020 | Conference Paper | LibreCat-ID: 24235
Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen
E. Moritzer, D. Krassmann, J. Brikmann, in: 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
 
[149]
2020 | Conference Paper | LibreCat-ID: 24237
INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT
E. Moritzer, S. Kartelmeyer, M. Hüttemann, C. Jaroschek, in: 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
 
[148]
2020 | Journal Article | LibreCat-ID: 24239
InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Lochbaum, E. Krampe, KGK - Rubberpoint (2020) 22–26.
LibreCat
 
[147]
2020 | Conference Paper | LibreCat-ID: 24242
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, in: Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
 
[146]
2020 | Journal Article | LibreCat-ID: 24246
Kostensenkung beim Mehrkomponenten-Spritzgießen
E. Moritzer, F.M. Mühlhoff, E. Krampe, Kunststoff + Verarbeitung (2020) 92–93.
LibreCat
 
[145]
2020 | Conference Paper | LibreCat-ID: 24247
Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process
E. Moritzer, J. Hillemeyer, in: 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
 
[144]
2020 | Journal Article | LibreCat-ID: 24248
Mehr Materialkombinationen, weniger Kosten
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe (2020) 39–42.
LibreCat
 
[143]
2020 | Journal Article | LibreCat-ID: 24249
Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite
E. Moritzer, M. Wittke, MNWP Magazin (2020) 26–27.
LibreCat
 
[142]
2020 | Journal Article | LibreCat-ID: 24250
More Material Combinations, Lower Costs
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe International (2020) 22–25.
LibreCat
 
[141]
2020 | Conference Paper | LibreCat-ID: 24251
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, in: DVS Congress 2020, 2020.
LibreCat
 
[140]
2020 | Journal Article | LibreCat-ID: 24252
Neue Maßstäbe in puncto Festigkeit und Faserlänge
E. Moritzer, M. Wittke, Plastverarbeiter (2020) 18–21.
LibreCat
 
[139]
2020 | Journal Article | LibreCat-ID: 24253
Plasma technology rationalizes 2-component processes
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhesion ADHESIVES + SEALANTS (2020).
LibreCat
 
[138]
2020 | Journal Article | LibreCat-ID: 24256
Plasma-Technologie zur Rationalisierung von 2K-Prozessen
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhäsion KLEBEN & DICHTEN (2020) 16–19.
LibreCat
 
[137]
2020 | Conference (Editor) | LibreCat-ID: 24259
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
 
[136]
2020 | Conference Paper | LibreCat-ID: 24260
Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting
E. Moritzer, C. Schumacher, in: 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
 
[135]
2020 | Journal Article | LibreCat-ID: 24261
The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting
E. Moritzer, M. Wortmann, N. Frese, W. Keil, J. Brikmann, J. Biedinger, B. Brockhagen, G. Reiss, C. Schmidt, A. Gölzhäuser, B. Hüsgen, Applied Polymer Materials (2020).
LibreCat
 
[134]
2020 | Conference Abstract | LibreCat-ID: 24478 LibreCat
 
[133]
2020 | Book Chapter | LibreCat-ID: 24479
The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat | DOI
 
[132]
2020 | Conference (Editor) | LibreCat-ID: 25768
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, eds., Neuartige Fügetechnik Für Organoblech-Hybridverbindungen, 2020.
LibreCat
 
[131]
2020 | Conference (Editor) | LibreCat-ID: 25779
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
 
[130]
2020 | Journal Article | LibreCat-ID: 25901
Chemical and Morphological Transition of Poly(acrylonitrile)/Poly(vinylidene Fluoride) Blend Nanofibers during Oxidative Stabilization and Incipient Carbonization
M. Wortmann, N. Frese, A. Mamun, M. Trabelsi, W. Keil, B. Büker, A. Javed, M. Tiemann, E. Moritzer, A. Ehrmann, A. Hütten, C. Schmidt, A. Gölzhäuser, B. Hüsgen, L. Sabantina, Nanomaterials (2020).
LibreCat | DOI
 
[129]
2019 | Conference (Editor) | LibreCat-ID: 25580
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
 
[128]
2019 | Conference Paper | LibreCat-ID: 25582 LibreCat
 
[127]
2019 | Conference (Editor) | LibreCat-ID: 25583
Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, D. Krassmann, eds., Nieten Ohne Fügeelement Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
 
[126]
2019 | Journal Article | LibreCat-ID: 25608
New Polymers for Needleless Electrospinning from Low-Toxic Solvents
E. Moritzer, M. Wortmann, N. Frese, L. Sabantina, R. Petkau, F. Kinzel, A. Golzhauser, B. Husgen, A. Ehrmann, NANOMATERIALS (2019).
LibreCat
 
[125]
2019 | Journal Article | LibreCat-ID: 25610
Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation
E. Moritzer, M. Wortmann, A. Hoffmann, N. Frese, A. Heide, J. Brikmann, N. Brandt, M. Menzel, A. Gölzhäuser, B. Häsgen, POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019) 1937–1943.
LibreCat
 
[124]
2019 | Conference Paper | LibreCat-ID: 25611
Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, F. Woitschek, in: 45. Deutsche Jahrestagung Für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
 
[123]
2019 | Conference Paper | LibreCat-ID: 25613
Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen
E. Moritzer, T. Westhues, in: 26. Fachtagung Über Die Verarbeitung Und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
 
[122]
2019 | Conference Paper | LibreCat-ID: 25621
Charakterisierung des Arburg Kunststoff Freiformens
E. Moritzer, A. Hirsch, in: ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design Und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
 
[121]
2019 | Conference Paper | LibreCat-ID: 25624
Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC)
E. Moritzer, J. Jilg, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[120]
2019 | Conference Paper | LibreCat-ID: 25626
Direktverschraubung additiv gefertigter Kunststoffbauteile
E. Moritzer, J. Hillemeyer, in: 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[119]
2019 | Conference Paper | LibreCat-ID: 25630
Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting
E. Moritzer, J. Hillemeyer, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[118]
2019 | Journal Article | LibreCat-ID: 25631 LibreCat
 
[117]
2019 | Journal Article | LibreCat-ID: 25635
Improved abrasion resistance of textile fabrics due to polymer coatings
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, A. Ehrmann, JOURNAL OF INDUSTRIAL TEXTILES (2019) 572–583.
LibreCat
 
[116]
2019 | Conference Paper | LibreCat-ID: 25636
Influences on structural intensity for injection mouldet thermoplastic parts
E. Moritzer, D. Netzband, A. Ujma, in: 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
 
[115]
2019 | Journal Article | LibreCat-ID: 25637
Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, Wissenschaftlicher Arbeitskreis Der Universitäts-Professoren Der Kunststofftechnik (2019) 54–59.
LibreCat
 
[114]
2019 | Conference Paper | LibreCat-ID: 25638
InMould-Plasma
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, in: Eröffnung Plasma-Campus Bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
 
[113]
2019 | Journal Article | LibreCat-ID: 25639
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, PU MAGAZIN - International (2019) 320–324.
LibreCat
 
[112]
2019 | Journal Article | LibreCat-ID: 25640
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, TPE Magazine International (2019) 230–234.
LibreCat
 
[111]
2019 | Conference Paper | LibreCat-ID: 25689
Lebensdauer von Composites und Composite-Metall-Hybridverbindungen
E. Moritzer, M. Hüttner, D. Krassmann, M. Wittke, in: Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
 
[110]
2019 | Conference Paper | LibreCat-ID: 25738
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
 
[109]
2019 | Conference Paper | LibreCat-ID: 25745
Oberflächennachbearbeitung und Kleben von FDM-Bauteilen
E. Moritzer, A. Hirsch, in: DGM-Seminar Für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
 
[108]
2019 | Conference Paper | LibreCat-ID: 25747 LibreCat
 
[107]
2019 | Journal Article | LibreCat-ID: 25748
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, W. Truemper, Welding in the World (2019) 867–873.
LibreCat
 
[106]
2019 | Conference Paper | LibreCat-ID: 25755
Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders
E. Moritzer, M. Wittke, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[105]
2019 | Conference Paper | LibreCat-ID: 25756
Spritzgießwerkzeuge mit Heatpipe-Temperierung
E. Moritzer, S. Kartelmeyer, B. Hüttemann, C. Jaroschek, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[104]
2019 | Journal Article | LibreCat-ID: 25757 LibreCat
 
[103]
2019 | Conference Paper | LibreCat-ID: 25760
Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC)
E. Moritzer, J. Jilg, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[102]
2019 | Journal Article | LibreCat-ID: 23844 LibreCat | DOI
 
[101]
2019 | Newspaper Article | LibreCat-ID: 23845
Advancing into New Dimensions
E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe Internationl 109 (2019) 48–52.
LibreCat | PubMed | Europe PMC
 
[100]
2019 | Newspaper Article | LibreCat-ID: 23850
Vorstoß in neue Dimensionen
E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe 109 (2019) 68–72.
LibreCat
 
[99]
2019 | Conference Paper | LibreCat-ID: 22022
Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength
E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 856–863.
LibreCat | DOI
 
[98]
2019 | Conference Paper | LibreCat-ID: 22041
Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components
E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 705–714.
LibreCat | DOI
 
[97]
2019 | Journal Article | LibreCat-ID: 22047
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the World 63 (2019) 867–873.
LibreCat | DOI
 
[96]
2019 | Conference Paper | LibreCat-ID: 22028
Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures
E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat | DOI
 
[95]
2019 | Book | LibreCat-ID: 22026
Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung
E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
LibreCat | DOI
 
[94]
2018 | Conference Paper | LibreCat-ID: 25784
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2018.
LibreCat
 
[93]
2018 | Conference Paper | LibreCat-ID: 25785
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2018.
LibreCat
 
[92]
2018 | Conference (Editor) | LibreCat-ID: 25787
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neuartige Fügetechnik Für Organoblech-Metall-Hybridverbindungen, 2018.
LibreCat
 
[91]
2018 | Conference (Editor) | LibreCat-ID: 25788
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Stempelnieten Als Neuartige Fügetechnik Für Organoblech-Metall-Hybridverbindungen, 2018.
LibreCat
 
[90]
2018 | Conference Paper | LibreCat-ID: 25790
Neue Methoden zum Fügen von Organoblechen
E. Moritzer, C. Budde, D. Krassmann, in: 2018.
LibreCat
 
[89]
2018 | Conference Paper | LibreCat-ID: 26937
Charakterisierung des Arburg Kunststoff Freiformens
E. Moritzer, A. Hirsch, in: 2018.
LibreCat
 
[88]
2018 | Conference Paper | LibreCat-ID: 26938
Dauerschwinguntersuchungen an FDM-Verstärkungsstrukturen
E. Moritzer, A. Hirsch, S. Paulus, in: 3. Tagung Des DVM-Arbeitskreises Additiv Gefertigte Bauteile Und Strukturen, 2018.
LibreCat
 
[87]
2018 | Journal Article | LibreCat-ID: 26939
Die effiziente Materialentwicklung mittels Spritzgießdirektcompoundierung (SGDC)
E. Moritzer, J. Jilg, Y. Martin, E. Müller, Zeitschrift Kunststofftechnik / Journal of Plastics Technology 14. Jg. Heft 1 (2018) 1–34.
LibreCat
 
[86]
2018 | Journal Article | LibreCat-ID: 26941
Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints
E. Moritzer, T. Nordmeyer, Welding in the World 62. Jg. Heft 3 (2018) 601–608.
LibreCat
 
[85]
2018 | Journal Article | LibreCat-ID: 26942 LibreCat
 
[84]
2018 | Journal Article | LibreCat-ID: 26946
Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising During Vacuum Castin Processes
E. Moritzer, M. Wortmann, N. Frese, A. Heide, J. Brinkmann, O. Strube, R. Dalpke, A. Gölzhausen, B. Hüsgen, Polymer-Plastics Technology and Engineering 57. Jg. Heft 15 (2018) 1524–1529.
LibreCat
 
[83]
2018 | Journal Article | LibreCat-ID: 26948
Glasfaseragglomerate im Visier - eine Zerreißprobe
E. Moritzer, J. Jilg, A. Neunhäuserer, W. Friesenbichler, Kunststoffe 108. Jg. (2018) 48–52.
LibreCat
 
[82]
2018 | Conference Paper | LibreCat-ID: 26949
Inflation Behavior of Preforms in the Special Injection Molding Process GITBlow Combining Gas Assisted Injection Molding and Blow Molding
E. Moritzer, B. Landgräber, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[81]
2018 | Conference Paper | LibreCat-ID: 26951
Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, S.S. Asad, in: 17. EWIKON Heißkanal-Forum, 2018.
LibreCat
 
[80]
2018 | Conference Paper | LibreCat-ID: 26953
Investigation on the Fiber Compounding with a New Type of Compounding Machine
E. Moritzer, G. Heiderich, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[79]
2018 | Conference Paper | LibreCat-ID: 26961
Neue Methoden zum Fügen von Organoblechen
E. Moritzer, C. Budde, D. Krassmann, in: Fügen von Kunststoffen Im Automobil 2018, 2018.
LibreCat
 
[78]
2018 | Conference Paper | LibreCat-ID: 26963
Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates
E. Moritzer, G. Heiderich, M. Wittke, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[77]
2018 | Conference Paper | LibreCat-ID: 26969
Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 8. Fügetechnisches Gemeinschaftskolloquium, 2018.
LibreCat
 
[76]
2018 | Conference Paper | LibreCat-ID: 26970
Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 8. Fügetechnisches Gemeinschaftskolloquium, 2018.
LibreCat
 
[75]
2018 | Journal Article | LibreCat-ID: 26971
Synergies from the Screw
E. Moritzer, M. Wittke, Kunststoffe International (2018) 34–37.
LibreCat
 
[74]
2018 | Journal Article | LibreCat-ID: 26972
Syngerien aus der Schnecke
E. Moritzer, M. Wittke, Kunststoffe (2018) 69–72.
LibreCat
 
[73]
2018 | Conference Paper | LibreCat-ID: 26974
System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes
E. Moritzer, T. Nordmeyer, in: Joining in Car Body Engineering 2018, 2018.
LibreCat
 
[72]
2018 | Conference Paper | LibreCat-ID: 26975
The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets
E. Moritzer, A. Hirsch, M. Hüttner, J. Wächter, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[71]
2018 | Conference Paper | LibreCat-ID: 26977
The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics
E. Moritzer, M. Hüttner, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[70]
2018 | Book Chapter | LibreCat-ID: 26979
Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen
E. Moritzer, B. Landgräber, in: Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
 
[69]
2017 | Conference Paper | LibreCat-ID: 25578
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 2017.
LibreCat
 
[68]
2017 | Conference Paper | LibreCat-ID: 24529
Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes
E. Moritzer, M. Hopp, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim, USA, 2017.
LibreCat
 
[67]
2017 | Conference (Editor) | LibreCat-ID: 25739
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Entwicklung Einer Neuartigen Fügetechnik Für Organoblech-Hybridverbindungen, 2017.
LibreCat
 
[66]
2017 | Conference Paper | LibreCat-ID: 27200
Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung
E. Moritzer, T. Westhues, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[65]
2017 | Conference Paper | LibreCat-ID: 27203
Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding
E. Moritzer, B. Landgräber, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[64]
2017 | Conference Paper | LibreCat-ID: 27204
Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, in: Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[63]
2017 | Conference Paper | LibreCat-ID: 27206
Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths
E. Moritzer, T. Nordmeyer, in: 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
 
[62]
2017 | Conference Paper | LibreCat-ID: 27209
Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints
E. Moritzer, T. Nordmeyer, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[61]
2017 | Conference Paper | LibreCat-ID: 27212
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
 
[60]
2017 | Conference Paper | LibreCat-ID: 27215
Fiber Length Reduction during Injection Molding
E. Moritzer, G. Heiderich, A. Hirsch, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[59]
2017 | Journal Article | LibreCat-ID: 27218
Inline Surface Activation in the Injection Molding Process for High Adhesive Strength
E. Moritzer, T. Nordmeyer, M. Häußler, Adhesion ADHESIVES & SEALANTS (2017).
LibreCat
 
[58]
2017 | Journal Article | LibreCat-ID: 27219
Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten
E. Moritzer, T. Nordmeyer, M. Häußler, Adhäsion (2017) 46–51.
LibreCat
 
[57]
2017 | Conference Paper | LibreCat-ID: 27223
Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[56]
2017 | Journal Article | LibreCat-ID: 27224
Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?
E. Moritzer, J. Krugmann, C. Leister, Kunststoffe Erfolgreich Kleben (2017) 81–86.
LibreCat
 
[55]
2017 | Journal Article | LibreCat-ID: 27225
Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig.
E. Moritzer, N. Friedrich, J. Berger, Kunststoffe Erfolgreich Kleben (2017) 213–221.
LibreCat
 
[54]
2017 | Conference Paper | LibreCat-ID: 27229
Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, Y. Martin, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[53]
2017 | Conference Paper | LibreCat-ID: 27230
Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process
E. Moritzer, B. Landgräber, Y. Martin, in: 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
 
[52]
2017 | Journal Article | LibreCat-ID: 27243
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A. Lasagni, Micromachines (2017) 246.
LibreCat
 
[51]
2017 | Journal Article | LibreCat-ID: 27244
Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen
E. Moritzer, M. Wortmann, N. Frese, A. Heide, O. Strube, A. Gölzhausne, B. Hüsgen, Ingenieurspiegel - Fachmagazin Für Ingenieure (2017) 52–54.
LibreCat
 
[50]
2017 | Journal Article | LibreCat-ID: 22038
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni, Micromachines 8 (2017).
LibreCat | DOI
 
[49]
2016 | Conference Paper | LibreCat-ID: 27246
An Approach to Non-Destructive Testing of Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[48]
2016 | Journal Article | LibreCat-ID: 27250
Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe International (2016) 43–45.
LibreCat
 
[47]
2016 | Conference Paper | LibreCat-ID: 27251
Development of an Inline Plasma Treatment During Injection Molding Process
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[46]
2016 | Conference Paper | LibreCat-ID: 27252
Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints
E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
 
[45]
2016 | Conference Paper | LibreCat-ID: 27253
Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
 
[44]
2016 | Conference Paper | LibreCat-ID: 27254
Experimental Investigations on the Fibre Length Degradation in Injection Moulds
E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[43]
2016 | Conference Paper | LibreCat-ID: 27255
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[42]
2016 | Conference Paper | LibreCat-ID: 27256
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
 
[41]
2016 | Conference Paper | LibreCat-ID: 27257
Fiber Length Reduction during Shearing in Polymer Processing
E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[40]
2016 | Journal Article | LibreCat-ID: 27259 LibreCat
 
[39]
2016 | Journal Article | LibreCat-ID: 27260
In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern
E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier, S. Waschke, Kunststoffe (2016) 70–72.
LibreCat
 
[38]
2016 | Journal Article | LibreCat-ID: 27264
Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess
E. Moritzer, Y. Martin, E. Müller, Kunststofftechnik - Spritzgießen 2016 (2016) 27–39.
LibreCat
 
[37]
2016 | Journal Article | LibreCat-ID: 27267 LibreCat
 
[36]
2016 | Conference Paper | LibreCat-ID: 27269
Organoblechnieten
E. Moritzer, C. Budde, M. Hüttner, in: 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
 
[35]
2016 | Journal Article | LibreCat-ID: 27271
Plasmaunterstütztes Fügen von Kunststoffen
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
LibreCat
 
[34]
2016 | Conference Paper | LibreCat-ID: 27276
The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, M. Webersen, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[33]
2016 | Journal Article | LibreCat-ID: 27278
Ultraschallbasierte Charakterisierung von gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Jahresmagazin Kunststofftechnik (2016) 98–103.
LibreCat
 
[32]
2016 | Conference Paper | LibreCat-ID: 27279
Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 18. GMA/ITG Fachtagung Sensoren Und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
 
[31]
2016 | Journal Article | LibreCat-ID: 22025
Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme
E. Moritzer, A. Hirsch, K. Günther, S. Teutoburg-Weiss, A.F. Lasagni, U. Klotzbach, F. Sonntag, 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ 6 (2016) 65–70.
LibreCat
 
[30]
2015 | Conference Paper | LibreCat-ID: 24530
Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications
E. Moritzer, M. Hopp, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki, Finnland, 2015.
LibreCat
 
[29]
2015 | Newspaper Article | LibreCat-ID: 27292
Wie Kurz- und Endlosfasern sich am besten vertragen
E. Moritzer, C. Budde, M. Hüttner, Kunststoffe 105 (2015).
LibreCat
 
[28]
2015 | Newspaper Article | LibreCat-ID: 27295
Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma
E. Moritzer, C. Leister, T. Nordmeyer, Zeitschrift Kunststofftechnik 11 (2015) 205–226.
LibreCat
 
[27]
2015 | Conference Paper | LibreCat-ID: 27297
Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time
E. Moritzer, R. Kleeschulte, S. Pollmann, K. Anger, in: Europe-Africa Conference of the Polymer Processing Society, Graz (Österrreich), 2015.
LibreCat
 
[26]
2015 | Conference Paper | LibreCat-ID: 27304
Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic
E. Moritzer, C. Budde, in: 20. Symposium Verbundwerkstoffe Und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
 
[25]
2015 | Conference Paper | LibreCat-ID: 27309
Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, A. Knospe, in: 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[24]
2015 | Conference Paper | LibreCat-ID: 27312
Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers
E. Moritzer, C. Budde, in: DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
 
[23]
2015 | Conference Paper | LibreCat-ID: 27313
Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets
E. Moritzer, G. Heiderich, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[22]
2015 | Newspaper Article | LibreCat-ID: 27317 LibreCat
 
[21]
2015 | Newspaper Article | LibreCat-ID: 27326
Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität
E. Moritzer, J. Leßmann, T. Plugge, S. Seidel, Zeitschrift Kunststofftechnik / Journal of Plastics Technology 11 (2015) 69–102.
LibreCat
 
[20]
2015 | Conference Paper | LibreCat-ID: 27327
Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, M. Bastian, in: 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 24532
The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC)
E. Moritzer, M. Hopp, in: 67th Annual Assembly of the International Institute of Welding (IIW), Seoul, Südkorea, 2014.
LibreCat
 
[18]
2014 | Newspaper Article | LibreCat-ID: 27328 LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27330
Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine
E. Moritzer, Y. Martin, E. Müller, R. Kleeschulte, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[16]
2014 | Conference Paper | LibreCat-ID: 27333
Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process
E. Moritzer, S. Seidel, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27335
Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow
E. Moritzer, in: WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed