Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
Download
No fulltext has been uploaded.
Conference Paper
| English
Author
Fischer, M.;
Schöppner, VolkerLibreCat
Department
Abstract
Fused Deposition Modeling (FDM) parts are prone to process-related rough and wavy surfaces with stair-stepping effects whenever the parts produced have sloped or rounded geometries. These stair-stepping effects can be reduced by using a smaller slice height, but complete elimination is not possible. In this paper, FDM parts manufactured with the material ABS-M30 are finished using mass finishing methods. The mass finishing is done with a trough vibrator, which is comparatively gentle to the parts in comparison to other mass finishing technologies. The analysis discusses the surface-smoothing effect of finishing time and intensity on various part sizes and build orientations. In addition, the dimensional accuracy of the parts after the finishing process is examined.
Publishing Year
Proceedings Title
25th Annual International Solid Freeform Fabrication Symposium
Volume
25
Page
923-934
LibreCat-ID
Cite this
Fischer M, Schöppner V. Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:923-934. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
Fischer, M., & Schöppner, V. (2014). Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy. 25th Annual International Solid Freeform Fabrication Symposium, 25, 923–934. http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
@inproceedings{Fischer_Schöppner_2014, title={Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf}, booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Fischer, M. and Schöppner, Volker}, year={2014}, pages={923–934} }
Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.” In 25th Annual International Solid Freeform Fabrication Symposium, 25:923–34, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
Google Scholar