185 Publications

Mark all

[185]
2021 | Journal Article | LibreCat-ID: 23839
A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion
C. Marschik, W. Roland, M. Döner, G. Steinbichler, V. Schöppner, Polymers (2021).
LibreCat
 
[184]
2021 | Conference Paper | LibreCat-ID: 24382 LibreCat
 
 
[182]
2021 | Journal Article | LibreCat-ID: 24383
Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples
A. Wübbeke, V. Schöppner, T. Arndt, J.-O. Maras, M. Fitze, C. Moltzahn, T. Wu, T. Niendorf, Polymers (2021).
LibreCat
 
[181]
 
[180]
2021 | Journal Article | LibreCat-ID: 23867
Influence of material degradation on weld seam quality in hot gas butt welding of polyamides
M. Bialaschik, V. Schöppner, M. Albrecht, M. Gehde, Welding in the World (2021) 1161–1169.
LibreCat | DOI
 
[179]
2021 | Newspaper Article | LibreCat-ID: 24372
Lebensdauer vorhersagen?
K. Gevers, V. Schöppner, K-Zeitung (n.d.).
LibreCat
 
[178]
2021 | Conference Paper | LibreCat-ID: 24389 LibreCat
 
[177]
2021 | Conference Paper | LibreCat-ID: 24442
Investigation of the pressure-throughput behavior of different faceted mixer geometries on an analytical and simulative basis
M. Frank, V. Hollenhorst, V. Schöppner, in: 36th International Conference of the Polymer Processing - PPS 2021, 2021.
LibreCat
 
[176]
2021 | Conference Paper | LibreCat-ID: 26630 LibreCat
 
[175]
2020 | Journal Article | LibreCat-ID: 24231
Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws
V. Schöppner, M. Dörner, C. Marschik, G. Steinbichler, Polymers (2020) 946.
LibreCat
 
[174]
2020 | Conference Paper | LibreCat-ID: 24318
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, V. Schöppner, in: DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020.
LibreCat
 
[173]
2020 | Newspaper Article | LibreCat-ID: 24387
Quasi-Simultaneous Laser Transmission Welding
T. Arndt, V. Schöppner, PhotonicsViews (2020).
LibreCat
 
[172]
2020 | Conference Paper | LibreCat-ID: 23865
Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations
V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, Springer, 2020.
LibreCat
 
[171]
2020 | Conference Paper | LibreCat-ID: 24471
Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides
V. Schöppner, M. Bialaschik, in: 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
 
[170]
2020 | Journal Article | LibreCat-ID: 24236
Selected Aspects for the Assessment of Laser Transmission Welding
V. Schöppner, A. Wübbeke, F. Schriegel, A. Paul, M. Tiemann, B. Geißler, M. Schmidt, A. Magnier, T. Niendorf, Joining Plastics (2020) 30–35.
LibreCat
 
[169]
2020 | Conference Paper | LibreCat-ID: 23873
Hot gas welding – Influences of the tool design
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.
LibreCat | DOI
 
[168]
2020 | Journal Article | LibreCat-ID: 23861
Materialabbau im Doppelschneckenextruder
M. Altepeter, V. Schöppner, Kunststoffe (2020).
LibreCat
 
[167]
2020 | Journal Article | LibreCat-ID: 24321
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, Welding in the World 64 (2020) 1843–1853.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 24472
LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P.- Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: ANTEC20, 2020.
LibreCat
 
[165]
2020 | Journal Article | LibreCat-ID: 24207
Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion)
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, G. Steinbichler, Polymers (2020) 1900.
LibreCat
 
[164]
2020 | Conference Paper | LibreCat-ID: 24245
Investigation of residual stresses of hot plate welding
V. Schöppner, A. Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, H. Heim, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Springer-Verlag, Marina Bay (Singapore), 2020.
LibreCat
 
[163]
2020 | Journal Article | LibreCat-ID: 23868
Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
LibreCat
 
[162]
2020 | Newspaper Article | LibreCat-ID: 24133
Der richtige Dreh für Simulationen
V. Schöppner, L. Austermeier, K. Dietl, Blasformen & Extrusionswerkzeuge (2020).
LibreCat
 
[161]
2020 | Newspaper Article | LibreCat-ID: 24385 LibreCat
 
[160]
2020 | Newspaper Article | LibreCat-ID: 24134
SKZ simuliert Doppelschnecke
V. Schöppner, L. Austermeier, K. Dietl, K Zeitung (2020).
LibreCat
 
[159]
2020 | Misc | LibreCat-ID: 24204
ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION
V. Schöppner, M. Dörner, C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
LibreCat
 
[158]
2020 | Journal Article | LibreCat-ID: 24312
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, I. Fiebig, V. Schöppner, Joining Plastics (2020).
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 24324 LibreCat
 
[156]
2020 | Newspaper Article | LibreCat-ID: 24386
Wenn Regeln Potenziale freisetzen
T. Arndt, V. Schöppner, K-Zeitung (2020).
LibreCat
 
[155]
2019 | Journal Article | LibreCat-ID: 25619
Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).
V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, G. Steinbichler, Polymers (2019) 1488–1515.
LibreCat
 
[154]
2019 | Journal Article | LibreCat-ID: 25633
Extruder optimier dich!
V. Schöppner, V. Resonnek, Kunstsstoffe (2019) 56–61.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 25746
Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters
V. Schöppner, H. Bayazian, A. Yadegari, H. Haddad, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
 
[152]
2019 | Journal Article | LibreCat-ID: 25753
Simulation aids compounding success
V. Schöppner, F. Sporkmann, Compounding World (2019) 47–56.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 22027
A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process
V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat | DOI
 
[150]
2019 | Conference Paper | LibreCat-ID: 24326
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, in: Bratislava, 2019.
LibreCat
 
[149]
2019 | Journal Article | LibreCat-ID: 23866
Simulation der Feststoffförderung im Einzug von Einschneckenextrudern
V. Schöppner, F. Brüning, WAK Jahresmagazin (2019).
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 25622
COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS
V. Schöppner, M. Dörner, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 25634
Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess
V. Schöppner, in: VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
 
[146]
2019 | Book | LibreCat-ID: 25627
Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern
V. Schöppner, K. Westhues, Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern, Chemnitz (Deutschland), 2019.
LibreCat
 
[145]
2019 | Conference Paper | LibreCat-ID: 25759
Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern
V. Schöppner, K. Westhues, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
 
[144]
2019 | Journal Article | LibreCat-ID: 25754
Simulation der Feststoffförderung im Einschneckenextruder
V. Schöppner, F. Brüning, WAK Jahresmagazin (2019) 64–67.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 25641
Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, F. Fitze, L. Austermeier, M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: Werkstoffwoche (2019), Dresden (Deutschland), 2019.
LibreCat
 
[142]
2019 | Conference Paper | LibreCat-ID: 23879
Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen
M. Albrecht, M. Gehde, M. Bialaschik, V. Schöppner, in: 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 25623
DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC
V. Schöppner, V. Resonnek, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[140]
2019 | Journal Article | LibreCat-ID: 25628
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1
V. Schöppner, J. Walter, GAK-Gummi Fasern Kunststoffe (2019) S. 152-159.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 25736
Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters
V. Schöppner, H. Bayazian, A. Yadegari, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[138]
2019 | Conference Paper | LibreCat-ID: 25750
Scale up von Doppelschneckenmaschinen
V. Schöppner, F. Sporkmann, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 25617
Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation
V. Schöppner, F. Sporkmann, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
 
[136]
2019 | Journal Article | LibreCat-ID: 25629
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2
V. Schöppner, J. Walter, GAK Gummi Faser Kunststoffe (2019) 206–213.
LibreCat
 
[135]
2019 | Conference Paper | LibreCat-ID: 25737
New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method
V. Schöppner, F. Sporkmann, A. Heide, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
 
[134]
2019 | Book | LibreCat-ID: 25751
Schmelzefilter
V. Schöppner, P. Meilwes, K. Westhues, Schmelzefilter, Chemnitz (Deutschland), 2019.
LibreCat
 
[133]
2018 | Journal Article | LibreCat-ID: 26934
Building the Perfect Model
V. Schöppner, F. Sporkmann, J. Markarian, Compounding World (2018) 31–40.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 26958
Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders
V. Schöppner, J. Trippe, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 26960
Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene
V. Schöppner, H. Bayazian, M. Hopp, A. Yadegari, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 26965
Scale-Up of Garvey-Die Test Setup
V. Schöppner, J. Walter, in: 13. Kautschuk-Herbst-Kolloquium (KHK), 2018.
LibreCat
 
[129]
2018 | Conference Paper | LibreCat-ID: 22046
Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process
F. Knoop, V. Schöppner, in: SPE ANTEC 2018, Society of Plastics Engineers , 2018.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 22034
Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, V. Schöppner, Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018) 83–88.
LibreCat
 
[127]
2018 | Journal Article | LibreCat-ID: 26930
Additive Fertigung nach Maß
V. Schöppner, D. Zimmer, F. Knoop, T. Lieneke, Kunststoffe 108. Jg. Heft 6 (2018).
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 26935
CAD-Datenerzeugung zur Druckverlustsimulation von Filtermedien
V. Schöppner, P. Meilwes, Konstruktion 70. Jg. Heft 11 (2018).
LibreCat
 
[125]
2018 | Conference Paper | LibreCat-ID: 26954
Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity
V. Schöppner, M. Schadomsky, D. Stüker, in: Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
 
[124]
2018 | Journal Article | LibreCat-ID: 26947
Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics
V. Schöppner, J. Fiebig, Welding in the World 62. Jg. (2018) 997–1012.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 26959
Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media
V. Schöppner, P. Meilwes, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[122]
2018 | Conference Paper | LibreCat-ID: 26966
Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte
V. Schöppner, J. Walter, in: Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
 
[121]
2018 | Journal Article | LibreCat-ID: 22035
Additive Fertigung nach Maß
F. Knoop, T. Lieneke, V. Schöppner, D. Zimmer, Kunststoffe 6 (2018) 70–73.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 26943
Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, Konstruktion 70. Jg. Heft 10 (2018) 83–88.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 26929
A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process
V. Schöppner, C. Schumacher, C. Fels, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[118]
2018 | Conference Paper | LibreCat-ID: 26962 LibreCat
 
[117]
2018 | Journal Article | LibreCat-ID: 26950
Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics
V. Schöppner, I. Fiebig, Welding in the World 62 (2018) 1301–1309.
LibreCat
 
[116]
2018 | Journal Article | LibreCat-ID: 26967
Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente
V. Schöppner, I. Fiebig, Joining Plastics 12 (2018) 87–93.
LibreCat
 
[115]
2018 | Conference Paper | LibreCat-ID: 26955
Materialentwicklung für FLM
V. Schöppner, C. Schumacher, C. Fels, in: WAK-Symposium, 2018.
LibreCat
 
[114]
2018 | Conference Paper | LibreCat-ID: 22043
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 1112–1120.
LibreCat | DOI
 
[113]
2018 | Journal Article | LibreCat-ID: 26932
Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths
V. Schöppner, P. Lakemeyer, B. Geißler, T. Laumer, A. Wübbeke, T. Frick, Journal of Laser Applications 30. Jg. (2018).
LibreCat
 
[112]
2018 | Conference Paper | LibreCat-ID: 26944
Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films
V. Schöppner, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, M. Razavi-Nouri, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[111]
2018 | Conference Paper | LibreCat-ID: 26968
Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality
V. Schöppner, V. Resonnek, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[110]
2018 | Conference Paper | LibreCat-ID: 26956
Materialschwindung und Verzug im FDM-Prozess
V. Schöppner, C. Schumacher, C. Fels, in: DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2018.
LibreCat
 
[109]
2018 | Conference Paper | LibreCat-ID: 22020
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 1112–1120.
LibreCat | DOI
 
[108]
2018 | Journal Article | LibreCat-ID: 26933
Analysis of the weld seam morphology of polypropylene in laser transmission welding
V. Schöppner, A. Wübbeke, B. Geißler, T. Laumer, T. Frick, M. Schmidt, Manuf. Sci. Eng (2018) 140(11).
LibreCat
 
[107]
 
[106]
2018 | Conference Paper | LibreCat-ID: 26952
Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment
V. Schöppner, H. Bayazian, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[105]
2018 | Conference Paper | LibreCat-ID: 26945
Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding
V. Schöppner, I. Fiebig, in: 71st Annual Assembly of the International Institute of Welding (IIW), 2018.
LibreCat
 
[104]
2018 | Conference Paper | LibreCat-ID: 26964
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
V. Schöppner, C. Schumacher, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, 2018.
LibreCat
 
[103]
2018 | Journal Article | LibreCat-ID: 26957 LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 22045
Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling
F. Knoop, V. Schöppner, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 2757–2776.
LibreCat | DOI
 
[101]
2017 | Conference Paper | LibreCat-ID: 22040
Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling
F. Knoop, T. Lieneke, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66.
LibreCat | DOI
 
[100]
2017 | Journal Article | LibreCat-ID: 22033
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals & Materials Society (TMS) (2017) 563–568.
LibreCat | DOI
 
[99]
2017 | Conference Paper | LibreCat-ID: 27228
Mehrschichtaufbau zur Verbesserung der mechanischen Eigenschaften von ökologisch unbedenklichen Flammschutzfolien
V. Schöppner, F. Reinders, M. Müller-Roosen, P. Morandini, M. Wolfring, S. Terwolbeck, S. Dill, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[98]
2017 | Conference Paper | LibreCat-ID: 27235
Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model
V. Schöppner, F. Reinders, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[97]
2017 | Journal Article | LibreCat-ID: 27216
Filterverschmutzung berechenbar machen
V. Schöppner, P. Meilwes, Kunststoffe (2017) 58–61.
LibreCat
 
[96]
2017 | Conference Paper | LibreCat-ID: 27242
Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, F. Reinders, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[95]
2017 | Conference Paper | LibreCat-ID: 27205
Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process
V. Schöppner, H. Bayazian, F. Reinders, C. Goebel, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[94]
2017 | Conference Paper | LibreCat-ID: 27231
Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds
V. Schöppner, J. Trippe, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[93]
2017 | Conference Paper | LibreCat-ID: 27236
Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts
V. Schöppner, I. Fiebig, P. Lakemeyer, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[92]
2017 | Conference Paper | LibreCat-ID: 27217
High Speed Extrusion of Modified Polycarbonate
V. Schöppner, M. Pohl, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[91]
2017 | Conference Paper | LibreCat-ID: 22042
Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process
C. Schumacher, V. Schöppner, J. Guntermann, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 470–484.
LibreCat | DOI
 
[90]
2017 | Conference Paper | LibreCat-ID: 22023
Quality Improvement of FDM Parts by Parameter Optimization
F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the Polymer Processing Society, American Institute of Physics, 2017.
LibreCat | DOI
 
[89]
2017 | Conference Paper | LibreCat-ID: 27213
Entwicklung einer unweltverträglichen und unbedenklichen flammgeschützten Polyethylen-Blasfolie
V. Schöppner, F. Reinders, M. Müller-Roosen, S. Dill, A. Kaya, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[88]
2017 | Conference Paper | LibreCat-ID: 27201
Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden
V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[87]
2017 | Conference Paper | LibreCat-ID: 27220
Investigation of Residual Stress in Laser Transmission Welding of Polypropylene
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, M. Schmidt, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[86]
2017 | Journal Article | LibreCat-ID: 27237
Phänomenorientierte Untersuchung der Feststoffförderzonen gleichläufiger Doppelschneckenextruder mithilfe der DEM-Simulation
V. Schöppner, H. Westhues, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2017) 196–211.
LibreCat
 
[85]
2017 | Conference Paper | LibreCat-ID: 27232
Modellierung des Reckprozesses von mono- und biaxial verstreckten Polypropylenfolien
V. Schöppner, F. Reinders, in: Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[84]
2017 | Journal Article | LibreCat-ID: 27202
Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik (2017) S. 108-114.
LibreCat
 
[83]
2017 | Conference Paper | LibreCat-ID: 27207
Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder
V. Schöppner, K. Westhues, in: 43. Deutsche Compoundiertagung, Nürnberg (Deutschland), 2017.
LibreCat
 
[82]
2017 | Journal Article | LibreCat-ID: 27214
Feststoff effizienter fördern
V. Schöppner, J. Trippe, Kunststoffe (2017) 47–52.
LibreCat
 
[81]
2017 | Conference Paper | LibreCat-ID: 27221
Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control
V. Schöppner, V. Resonnek, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[80]
2017 | Conference Paper | LibreCat-ID: 27233
Modelling the Contamination Behaviour of Polymer Melt Filters
V. Schöppner, P. Meilwes, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[79]
2017 | Journal Article | LibreCat-ID: 27226
Laser Transmission Welding of Automotive Head Lamps without Clamping Tool
V. Schöppner, P. Lakemeyer, Welding in the World (2017) 589–602.
LibreCat
 
[78]
2017 | Conference Paper | LibreCat-ID: 27240
Simulation von Doppelschneckenextrudern - Einblicke in das Gemeinschaftsforschungsprojekt SIGMA
V. Schöppner, K. Westhues, in: 12. Würzburger Compoundiertage, Würzburg (Deutschland), 2017.
LibreCat
 
[77]
2017 | Conference Paper | LibreCat-ID: 27238
Potentiale zur Erhöhung der Schweißnahtfestigkeit faserverstärkter Thermoplaste
V. Schöppner, I. Fiebig, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[76]
2017 | Journal Article | LibreCat-ID: 22049
Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik 1 (2017) 108–114.
LibreCat
 
[75]
2017 | Conference Paper | LibreCat-ID: 27208
Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics while Measuring by Quasi-Static Tensile Testing
V. Schöppner, J. Walter, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[74]
2017 | Conference Paper | LibreCat-ID: 27210
Energieeintrag in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder
V. Schöppner, K. Westhues, R. Weinlein, A. Knieper, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[73]
2017 | Conference Paper | LibreCat-ID: 27222
Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM)
V. Schöppner, K. Westhues, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[72]
2017 | Conference Paper | LibreCat-ID: 27241
Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[71]
2017 | Conference Paper | LibreCat-ID: 27234
Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot
V. Schöppner, F. Reinders, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[70]
2017 | Journal Article | LibreCat-ID: 27227
Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, Welding in the World (2017) 1247–1252.
LibreCat
 
[69]
2017 | Journal Article | LibreCat-ID: 27239
Schnelllaufender Einschneckenextruder mit Direktantrieb
V. Schöppner, M. Schadomsky, C. Diekmann, M. Schneider, Kunststoffe (2017) 170–174.
LibreCat
 
[68]
2016 | Conference Paper | LibreCat-ID: 22019
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
LibreCat | DOI
 
[67]
2016 | Journal Article | LibreCat-ID: 27247
Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, KGK Kautschuk Gummi Kunststoffe (2016) 30–36.
LibreCat
 
[66]
2016 | Journal Article | LibreCat-ID: 27261
Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, International Journal of Polymer Science (2016).
LibreCat
 
[65]
2016 | Conference Paper | LibreCat-ID: 27266
Modellierung des Glasfaserlängenabbaus
V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
 
[64]
2016 | Journal Article | LibreCat-ID: 27273
Realitätsnah und definiert verschmutzen
V. Schöppner, P. Meilwes, Kunststoffe (2016) 80–84.
LibreCat
 
[63]
2016 | Conference Paper | LibreCat-ID: 22039
Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.
LibreCat | DOI
 
[62]
2016 | Conference Paper | LibreCat-ID: 27262
Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[61]
2016 | Journal Article | LibreCat-ID: 27248
Auswirkungen von Betriebsparametern in der Heißluftvulkanisation
V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe (2016) 410–413.
LibreCat
 
[60]
2016 | Journal Article | LibreCat-ID: 27274
Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht
V. Schöppner, I. Fiebig, Jahresmagazin Kunststofftechnik (2016) 120–126.
LibreCat
 
[59]
2016 | Conference Paper | LibreCat-ID: 27263
Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method
V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[58]
2016 | Conference Paper | LibreCat-ID: 27268
Non-Destructive Characterization of Hygrothermally Aged Polymers
V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[57]
2016 | Journal Article | LibreCat-ID: 27249
Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung
V. Schöppner, S. Littek, A. Döring, D. Kuckling, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2016) 18.
LibreCat
 
[56]
2016 | Journal Article | LibreCat-ID: 27270
Partikel und Schmelze im dynamischen Netz
V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.
LibreCat
 
[55]
2016 | Conference Paper | LibreCat-ID: 27275
Several Influences during Examinations of Laser Transmission Welding - Current Status
V. Schöppner, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[54]
2016 | Conference Paper | LibreCat-ID: 27245
A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[53]
2016 | Journal Article | LibreCat-ID: 27271
Plasmaunterstütztes Fügen von Kunststoffen
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
LibreCat
 
[52]
2016 | Conference Paper | LibreCat-ID: 27265
Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[51]
2016 | Conference Paper | LibreCat-ID: 27272
Quality Improvement of FDM Parts by Parameter Optimization
V. Schöppner, A. Bagsik, F. Knoop, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[50]
2016 | Conference Paper | LibreCat-ID: 27258
First Insight into the High Speed Extrusion of Polycarbonate
V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[49]
2016 | Journal Article | LibreCat-ID: 27277
The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials
V. Schöppner, F. Evers, P. Lakemeyer, Welding in the World (2016).
LibreCat
 
[48]
2015 | Newspaper Article | LibreCat-ID: 27305
Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe 68 (2015) 46–58.
LibreCat
 
[47]
2015 | Conference Paper | LibreCat-ID: 27300
Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood
V. Schöppner, F. Reinders, W. Bremser, E. Sabanov, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[46]
2015 | Conference Paper | LibreCat-ID: 27329
Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures
V. Schöppner, N. Fecke, T. Herken, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2015.
LibreCat
 
[45]
2015 | Conference Paper | LibreCat-ID: 27301
Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders
V. Schöppner, J. Leßmann, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[44]
2015 | Conference Paper | LibreCat-ID: 27306
Influence of the Screw Clearances on the Pressure Build-Up
V. Schöppner, T. Herken, M. Hüttner, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[43]
2015 | Conference Paper | LibreCat-ID: 27320
Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders
V. Schöppner, T. Herken, M. Pohl, K. Westhues, in: 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
 
[42]
2015 | Conference Paper | LibreCat-ID: 27318
Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk
V. Schöppner, J. Leßmann, in: 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
 
[41]
2015 | Conference Paper | LibreCat-ID: 27325
Transferbility of Investigation Results for Laser Transmission Welding
V. Schöppner, P. Lakemeyer, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
 
[40]
2015 | Conference Paper | LibreCat-ID: 27319
Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk
V. Schöppner, J. Leßmann, in: 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
 
[39]
2015 | Conference Paper | LibreCat-ID: 27314
Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, in: Deutsche Kautschuk-Tagung (DKT 2015), Nürnberg (Deutschland), 2015.
LibreCat
 
[38]
2015 | Newspaper Article | LibreCat-ID: 27321
Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz
V. Schöppner, T. Herken, M. Hüttner, Prozessoptimierung an Compoundieranlagen (2015).
LibreCat
 
[37]
2015 | Conference Paper | LibreCat-ID: 22031
Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30
F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.
LibreCat | DOI
 
[36]
2015 | Conference Paper | LibreCat-ID: 27308
Investigations of the Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[35]
2015 | Conference Paper | LibreCat-ID: 27310
Laser Transmission Welding of Automotive Headlamps without Clamping Tool
V. Schöppner, P. Lakemeyer, in: GNS8 - International Conference on Thermoplastics Joining, Genua (Italien), 2015.
LibreCat
 
[34]
2015 | Newspaper Article | LibreCat-ID: 27303
Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion
V. Schöppner, S. Brockhaus, GAK Gummi Fasern Kunststoffe 68 (2015) 470–474.
LibreCat
 
[33]
2015 | Conference Paper | LibreCat-ID: 27322
Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section
V. Schöppner, B. Henke, F. Reinders, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[32]
2015 | Conference Paper | LibreCat-ID: 27315
Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, in: Science Meets Tires, Aachen (Deutschland), 2015.
LibreCat
 
[31]
2015 | Conference Paper | LibreCat-ID: 22044
Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12
F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.
LibreCat | DOI
 
[30]
2015 | Newspaper Article | LibreCat-ID: 27296
Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern
V. Schöppner, N. Fecke, T. Herken, Jahresmagazin Kunststofftechnik (2015).
LibreCat
 
[29]
2015 | Conference Paper | LibreCat-ID: 27311
Laser Transmission Welding of Automotive Headlamps without Clamping Tool
V. Schöppner, P. Lakemeyer, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
 
[28]
2014 | Conference Paper | LibreCat-ID: 22021
Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.
LibreCat | DOI
 
[27]
2014 | Conference Paper | LibreCat-ID: 27331
Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures
V. Schöppner, N. Fecke, T. Herken, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[26]
2014 | Conference Paper | LibreCat-ID: 27348
Investigations about High-Speed Rubber Extrusion
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, in: 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
 
[25]
2014 | Conference Paper | LibreCat-ID: 27337
Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation - Auslegung
V. Schöppner, T. Herken, F. Reinders, K. Westhues, in: Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.
LibreCat
 
[24]
2014 | Conference Paper | LibreCat-ID: 27344
Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die
V. Schöppner, B. Henke, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[23]
2014 | Conference Paper | LibreCat-ID: 27332
Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs
V. Schöppner, S. Littek, in: PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
 
[22]
2014 | Conference Paper | LibreCat-ID: 27349
Measurement and Calculation of the Material Degradation of Polystyrene and Modeling of the Degradation by using REX
V. Schöppner, S. Littek, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[21]
2014 | Conference Paper | LibreCat-ID: 27356
Production of Graded Structures in Films
V. Schöppner, A. Wibbeke, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[20]
2014 | Conference Paper | LibreCat-ID: 27363
WPC: Compoundierung und Rezepturen
V. Schöppner, N. Böhm, F. Reinders, in: WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 22030
Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.
LibreCat
 
[18]
2014 | Conference Paper | LibreCat-ID: 27338
Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder
V. Schöppner, N. Fecke, T. Herken, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27357
Stretching of Polycarbonate
V. Schöppner, A. Wibbeke, in: 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
 
[16]
2014 | Newspaper Article | LibreCat-ID: 27341
Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe 67 (2014).
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27346
Influence of Flame Retardant Material on the Weld Strength of Plastic Parts
V. Schöppner, F. Evers, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[14]
2014 | Conference Paper | LibreCat-ID: 27334
Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood
V. Schöppner, F. Reinders, in: Biobased Materials 2014 - 10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
LibreCat
 
[13]
2014 | Conference Paper | LibreCat-ID: 27360
The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials
V. Schöppner, F. Evers, P. Lakemeyer, in: 67th Annual Assembly of the International Institute of Welding (IIW), Seoul (Südkorea), 2014.
LibreCat
 
[12]
2014 | Conference Paper | LibreCat-ID: 22018
Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
LibreCat | DOI
 
[11]
2014 | Conference Paper | LibreCat-ID: 27342
Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich
V. Schöppner, N. Böhm, in: 16th Workshop Odour and Emissions of Plastic Materials, Kassel (Deutschland), 2014.
LibreCat
 
[10]
2014 | Conference Paper | LibreCat-ID: 27361
Validation of Discrete Element Simulations in the Field of Solids Conveying in Single-screw Extruders
V. Schöppner, J. Leßmann, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[9]
2014 | Conference Paper | LibreCat-ID: 27354
Optimisation of the Mixing Behaviour of Rubber Pin-Type Extruders
V. Schöppner, M. Schadomsky, F. Lemke, in: 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
 
[8]
2013 | Conference Paper | LibreCat-ID: 22017
Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.
LibreCat | DOI
 
[7]
2012 | Conference Paper | LibreCat-ID: 22016
Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.
LibreCat | DOI
 
[6]
2012 | Conference Paper | LibreCat-ID: 22024
Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.
LibreCat | DOI
 
[5]
2012 | Conference Paper | LibreCat-ID: 22164
Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.
LibreCat
 
[4]
2011 | Conference Paper | LibreCat-ID: 22029
Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.
LibreCat | DOI
 
[3]
2010 | Conference Paper | LibreCat-ID: 23858
Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA
N. Kretzschmar, V. Schöppner, in: Proceedings of the 2010 Summer Computer Simulation Conference, Society for Computer Simulation International, San Diego, CA, USA, 2010, pp. 133–140.
LibreCat
 
[2]
2010 | Conference Paper | LibreCat-ID: 22050
FDM Part Quality Manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.
LibreCat | DOI
 
[1]
2010 | Journal Article | LibreCat-ID: 25092
Residual stresses in the quasi-simultaneous laser transmission welding of amorphous thermoplastics
D. Bonefeld, V. Schöppner, H. Potente, R. Mahnken, A. Shaban, Polymer Engineering & Science (2010) 1520–1526.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Export / Embed

185 Publications

Mark all

[185]
2021 | Journal Article | LibreCat-ID: 23839
A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion
C. Marschik, W. Roland, M. Döner, G. Steinbichler, V. Schöppner, Polymers (2021).
LibreCat
 
[184]
2021 | Conference Paper | LibreCat-ID: 24382 LibreCat
 
 
[182]
2021 | Journal Article | LibreCat-ID: 24383
Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples
A. Wübbeke, V. Schöppner, T. Arndt, J.-O. Maras, M. Fitze, C. Moltzahn, T. Wu, T. Niendorf, Polymers (2021).
LibreCat
 
[181]
 
[180]
2021 | Journal Article | LibreCat-ID: 23867
Influence of material degradation on weld seam quality in hot gas butt welding of polyamides
M. Bialaschik, V. Schöppner, M. Albrecht, M. Gehde, Welding in the World (2021) 1161–1169.
LibreCat | DOI
 
[179]
2021 | Newspaper Article | LibreCat-ID: 24372
Lebensdauer vorhersagen?
K. Gevers, V. Schöppner, K-Zeitung (n.d.).
LibreCat
 
[178]
2021 | Conference Paper | LibreCat-ID: 24389 LibreCat
 
[177]
2021 | Conference Paper | LibreCat-ID: 24442
Investigation of the pressure-throughput behavior of different faceted mixer geometries on an analytical and simulative basis
M. Frank, V. Hollenhorst, V. Schöppner, in: 36th International Conference of the Polymer Processing - PPS 2021, 2021.
LibreCat
 
[176]
2021 | Conference Paper | LibreCat-ID: 26630 LibreCat
 
[175]
2020 | Journal Article | LibreCat-ID: 24231
Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws
V. Schöppner, M. Dörner, C. Marschik, G. Steinbichler, Polymers (2020) 946.
LibreCat
 
[174]
2020 | Conference Paper | LibreCat-ID: 24318
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, V. Schöppner, in: DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020.
LibreCat
 
[173]
2020 | Newspaper Article | LibreCat-ID: 24387
Quasi-Simultaneous Laser Transmission Welding
T. Arndt, V. Schöppner, PhotonicsViews (2020).
LibreCat
 
[172]
2020 | Conference Paper | LibreCat-ID: 23865
Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations
V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, Springer, 2020.
LibreCat
 
[171]
2020 | Conference Paper | LibreCat-ID: 24471
Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides
V. Schöppner, M. Bialaschik, in: 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
 
[170]
2020 | Journal Article | LibreCat-ID: 24236
Selected Aspects for the Assessment of Laser Transmission Welding
V. Schöppner, A. Wübbeke, F. Schriegel, A. Paul, M. Tiemann, B. Geißler, M. Schmidt, A. Magnier, T. Niendorf, Joining Plastics (2020) 30–35.
LibreCat
 
[169]
2020 | Conference Paper | LibreCat-ID: 23873
Hot gas welding – Influences of the tool design
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.
LibreCat | DOI
 
[168]
2020 | Journal Article | LibreCat-ID: 23861
Materialabbau im Doppelschneckenextruder
M. Altepeter, V. Schöppner, Kunststoffe (2020).
LibreCat
 
[167]
2020 | Journal Article | LibreCat-ID: 24321
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, Welding in the World 64 (2020) 1843–1853.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 24472
LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P.- Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: ANTEC20, 2020.
LibreCat
 
[165]
2020 | Journal Article | LibreCat-ID: 24207
Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion)
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, G. Steinbichler, Polymers (2020) 1900.
LibreCat
 
[164]
2020 | Conference Paper | LibreCat-ID: 24245
Investigation of residual stresses of hot plate welding
V. Schöppner, A. Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, H. Heim, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Springer-Verlag, Marina Bay (Singapore), 2020.
LibreCat
 
[163]
2020 | Journal Article | LibreCat-ID: 23868
Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
LibreCat
 
[162]
2020 | Newspaper Article | LibreCat-ID: 24133
Der richtige Dreh für Simulationen
V. Schöppner, L. Austermeier, K. Dietl, Blasformen & Extrusionswerkzeuge (2020).
LibreCat
 
[161]
2020 | Newspaper Article | LibreCat-ID: 24385 LibreCat
 
[160]
2020 | Newspaper Article | LibreCat-ID: 24134
SKZ simuliert Doppelschnecke
V. Schöppner, L. Austermeier, K. Dietl, K Zeitung (2020).
LibreCat
 
[159]
2020 | Misc | LibreCat-ID: 24204
ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION
V. Schöppner, M. Dörner, C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
LibreCat
 
[158]
2020 | Journal Article | LibreCat-ID: 24312
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, I. Fiebig, V. Schöppner, Joining Plastics (2020).
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 24324 LibreCat
 
[156]
2020 | Newspaper Article | LibreCat-ID: 24386
Wenn Regeln Potenziale freisetzen
T. Arndt, V. Schöppner, K-Zeitung (2020).
LibreCat
 
[155]
2019 | Journal Article | LibreCat-ID: 25619
Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).
V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, G. Steinbichler, Polymers (2019) 1488–1515.
LibreCat
 
[154]
2019 | Journal Article | LibreCat-ID: 25633
Extruder optimier dich!
V. Schöppner, V. Resonnek, Kunstsstoffe (2019) 56–61.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 25746
Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters
V. Schöppner, H. Bayazian, A. Yadegari, H. Haddad, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
 
[152]
2019 | Journal Article | LibreCat-ID: 25753
Simulation aids compounding success
V. Schöppner, F. Sporkmann, Compounding World (2019) 47–56.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 22027
A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process
V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat | DOI
 
[150]
2019 | Conference Paper | LibreCat-ID: 24326
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, in: Bratislava, 2019.
LibreCat
 
[149]
2019 | Journal Article | LibreCat-ID: 23866
Simulation der Feststoffförderung im Einzug von Einschneckenextrudern
V. Schöppner, F. Brüning, WAK Jahresmagazin (2019).
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 25622
COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS
V. Schöppner, M. Dörner, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 25634
Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess
V. Schöppner, in: VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
 
[146]
2019 | Book | LibreCat-ID: 25627
Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern
V. Schöppner, K. Westhues, Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern, Chemnitz (Deutschland), 2019.
LibreCat
 
[145]
2019 | Conference Paper | LibreCat-ID: 25759
Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern
V. Schöppner, K. Westhues, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
 
[144]
2019 | Journal Article | LibreCat-ID: 25754
Simulation der Feststoffförderung im Einschneckenextruder
V. Schöppner, F. Brüning, WAK Jahresmagazin (2019) 64–67.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 25641
Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, F. Fitze, L. Austermeier, M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: Werkstoffwoche (2019), Dresden (Deutschland), 2019.
LibreCat
 
[142]
2019 | Conference Paper | LibreCat-ID: 23879
Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen
M. Albrecht, M. Gehde, M. Bialaschik, V. Schöppner, in: 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 25623
DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC
V. Schöppner, V. Resonnek, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[140]
2019 | Journal Article | LibreCat-ID: 25628
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1
V. Schöppner, J. Walter, GAK-Gummi Fasern Kunststoffe (2019) S. 152-159.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 25736
Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters
V. Schöppner, H. Bayazian, A. Yadegari, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[138]
2019 | Conference Paper | LibreCat-ID: 25750
Scale up von Doppelschneckenmaschinen
V. Schöppner, F. Sporkmann, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 25617
Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation
V. Schöppner, F. Sporkmann, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
 
[136]
2019 | Journal Article | LibreCat-ID: 25629
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2
V. Schöppner, J. Walter, GAK Gummi Faser Kunststoffe (2019) 206–213.
LibreCat
 
[135]
2019 | Conference Paper | LibreCat-ID: 25737
New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method
V. Schöppner, F. Sporkmann, A. Heide, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
 
[134]
2019 | Book | LibreCat-ID: 25751
Schmelzefilter
V. Schöppner, P. Meilwes, K. Westhues, Schmelzefilter, Chemnitz (Deutschland), 2019.
LibreCat
 
[133]
2018 | Journal Article | LibreCat-ID: 26934
Building the Perfect Model
V. Schöppner, F. Sporkmann, J. Markarian, Compounding World (2018) 31–40.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 26958
Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders
V. Schöppner, J. Trippe, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 26960
Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene
V. Schöppner, H. Bayazian, M. Hopp, A. Yadegari, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 26965
Scale-Up of Garvey-Die Test Setup
V. Schöppner, J. Walter, in: 13. Kautschuk-Herbst-Kolloquium (KHK), 2018.
LibreCat
 
[129]
2018 | Conference Paper | LibreCat-ID: 22046
Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process
F. Knoop, V. Schöppner, in: SPE ANTEC 2018, Society of Plastics Engineers , 2018.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 22034
Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, V. Schöppner, Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018) 83–88.
LibreCat
 
[127]
2018 | Journal Article | LibreCat-ID: 26930
Additive Fertigung nach Maß
V. Schöppner, D. Zimmer, F. Knoop, T. Lieneke, Kunststoffe 108. Jg. Heft 6 (2018).
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 26935
CAD-Datenerzeugung zur Druckverlustsimulation von Filtermedien
V. Schöppner, P. Meilwes, Konstruktion 70. Jg. Heft 11 (2018).
LibreCat
 
[125]
2018 | Conference Paper | LibreCat-ID: 26954
Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity
V. Schöppner, M. Schadomsky, D. Stüker, in: Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
 
[124]
2018 | Journal Article | LibreCat-ID: 26947
Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics
V. Schöppner, J. Fiebig, Welding in the World 62. Jg. (2018) 997–1012.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 26959
Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media
V. Schöppner, P. Meilwes, in: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
 
[122]
2018 | Conference Paper | LibreCat-ID: 26966
Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte
V. Schöppner, J. Walter, in: Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
 
[121]
2018 | Journal Article | LibreCat-ID: 22035
Additive Fertigung nach Maß
F. Knoop, T. Lieneke, V. Schöppner, D. Zimmer, Kunststoffe 6 (2018) 70–73.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 26943
Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, Konstruktion 70. Jg. Heft 10 (2018) 83–88.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 26929
A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process
V. Schöppner, C. Schumacher, C. Fels, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[118]
2018 | Conference Paper | LibreCat-ID: 26962 LibreCat
 
[117]
2018 | Journal Article | LibreCat-ID: 26950
Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics
V. Schöppner, I. Fiebig, Welding in the World 62 (2018) 1301–1309.
LibreCat
 
[116]
2018 | Journal Article | LibreCat-ID: 26967
Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente
V. Schöppner, I. Fiebig, Joining Plastics 12 (2018) 87–93.
LibreCat
 
[115]
2018 | Conference Paper | LibreCat-ID: 26955
Materialentwicklung für FLM
V. Schöppner, C. Schumacher, C. Fels, in: WAK-Symposium, 2018.
LibreCat
 
[114]
2018 | Conference Paper | LibreCat-ID: 22043
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 1112–1120.
LibreCat | DOI
 
[113]
2018 | Journal Article | LibreCat-ID: 26932
Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths
V. Schöppner, P. Lakemeyer, B. Geißler, T. Laumer, A. Wübbeke, T. Frick, Journal of Laser Applications 30. Jg. (2018).
LibreCat
 
[112]
2018 | Conference Paper | LibreCat-ID: 26944
Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films
V. Schöppner, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, M. Razavi-Nouri, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[111]
2018 | Conference Paper | LibreCat-ID: 26968
Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality
V. Schöppner, V. Resonnek, in: 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
 
[110]
2018 | Conference Paper | LibreCat-ID: 26956
Materialschwindung und Verzug im FDM-Prozess
V. Schöppner, C. Schumacher, C. Fels, in: DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2018.
LibreCat
 
[109]
2018 | Conference Paper | LibreCat-ID: 22020
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 1112–1120.
LibreCat | DOI
 
[108]
2018 | Journal Article | LibreCat-ID: 26933
Analysis of the weld seam morphology of polypropylene in laser transmission welding
V. Schöppner, A. Wübbeke, B. Geißler, T. Laumer, T. Frick, M. Schmidt, Manuf. Sci. Eng (2018) 140(11).
LibreCat
 
[107]
 
[106]
2018 | Conference Paper | LibreCat-ID: 26952
Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment
V. Schöppner, H. Bayazian, in: 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
 
[105]
2018 | Conference Paper | LibreCat-ID: 26945
Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding
V. Schöppner, I. Fiebig, in: 71st Annual Assembly of the International Institute of Welding (IIW), 2018.
LibreCat
 
[104]
2018 | Conference Paper | LibreCat-ID: 26964
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
V. Schöppner, C. Schumacher, S. Gnaase, in: 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, 2018.
LibreCat
 
[103]
2018 | Journal Article | LibreCat-ID: 26957 LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 22045
Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling
F. Knoop, V. Schöppner, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 2757–2776.
LibreCat | DOI
 
[101]
2017 | Conference Paper | LibreCat-ID: 22040
Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling
F. Knoop, T. Lieneke, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66.
LibreCat | DOI
 
[100]
2017 | Journal Article | LibreCat-ID: 22033
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals & Materials Society (TMS) (2017) 563–568.
LibreCat | DOI
 
[99]
2017 | Conference Paper | LibreCat-ID: 27228
Mehrschichtaufbau zur Verbesserung der mechanischen Eigenschaften von ökologisch unbedenklichen Flammschutzfolien
V. Schöppner, F. Reinders, M. Müller-Roosen, P. Morandini, M. Wolfring, S. Terwolbeck, S. Dill, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[98]
2017 | Conference Paper | LibreCat-ID: 27235
Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model
V. Schöppner, F. Reinders, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[97]
2017 | Journal Article | LibreCat-ID: 27216
Filterverschmutzung berechenbar machen
V. Schöppner, P. Meilwes, Kunststoffe (2017) 58–61.
LibreCat
 
[96]
2017 | Conference Paper | LibreCat-ID: 27242
Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, F. Reinders, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[95]
2017 | Conference Paper | LibreCat-ID: 27205
Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process
V. Schöppner, H. Bayazian, F. Reinders, C. Goebel, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[94]
2017 | Conference Paper | LibreCat-ID: 27231
Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds
V. Schöppner, J. Trippe, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[93]
2017 | Conference Paper | LibreCat-ID: 27236
Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts
V. Schöppner, I. Fiebig, P. Lakemeyer, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[92]
2017 | Conference Paper | LibreCat-ID: 27217
High Speed Extrusion of Modified Polycarbonate
V. Schöppner, M. Pohl, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[91]
2017 | Conference Paper | LibreCat-ID: 22042
Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process
C. Schumacher, V. Schöppner, J. Guntermann, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 470–484.
LibreCat | DOI
 
[90]
2017 | Conference Paper | LibreCat-ID: 22023
Quality Improvement of FDM Parts by Parameter Optimization
F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the Polymer Processing Society, American Institute of Physics, 2017.
LibreCat | DOI
 
[89]
2017 | Conference Paper | LibreCat-ID: 27213
Entwicklung einer unweltverträglichen und unbedenklichen flammgeschützten Polyethylen-Blasfolie
V. Schöppner, F. Reinders, M. Müller-Roosen, S. Dill, A. Kaya, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[88]
2017 | Conference Paper | LibreCat-ID: 27201
Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden
V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[87]
2017 | Conference Paper | LibreCat-ID: 27220
Investigation of Residual Stress in Laser Transmission Welding of Polypropylene
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, M. Schmidt, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[86]
2017 | Journal Article | LibreCat-ID: 27237
Phänomenorientierte Untersuchung der Feststoffförderzonen gleichläufiger Doppelschneckenextruder mithilfe der DEM-Simulation
V. Schöppner, H. Westhues, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2017) 196–211.
LibreCat
 
[85]
2017 | Conference Paper | LibreCat-ID: 27232
Modellierung des Reckprozesses von mono- und biaxial verstreckten Polypropylenfolien
V. Schöppner, F. Reinders, in: Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[84]
2017 | Journal Article | LibreCat-ID: 27202
Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik (2017) S. 108-114.
LibreCat
 
[83]
2017 | Conference Paper | LibreCat-ID: 27207
Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder
V. Schöppner, K. Westhues, in: 43. Deutsche Compoundiertagung, Nürnberg (Deutschland), 2017.
LibreCat
 
[82]
2017 | Journal Article | LibreCat-ID: 27214
Feststoff effizienter fördern
V. Schöppner, J. Trippe, Kunststoffe (2017) 47–52.
LibreCat
 
[81]
2017 | Conference Paper | LibreCat-ID: 27221
Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control
V. Schöppner, V. Resonnek, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[80]
2017 | Conference Paper | LibreCat-ID: 27233
Modelling the Contamination Behaviour of Polymer Melt Filters
V. Schöppner, P. Meilwes, in: 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[79]
2017 | Journal Article | LibreCat-ID: 27226
Laser Transmission Welding of Automotive Head Lamps without Clamping Tool
V. Schöppner, P. Lakemeyer, Welding in the World (2017) 589–602.
LibreCat
 
[78]
2017 | Conference Paper | LibreCat-ID: 27240
Simulation von Doppelschneckenextrudern - Einblicke in das Gemeinschaftsforschungsprojekt SIGMA
V. Schöppner, K. Westhues, in: 12. Würzburger Compoundiertage, Würzburg (Deutschland), 2017.
LibreCat
 
[77]
2017 | Conference Paper | LibreCat-ID: 27238
Potentiale zur Erhöhung der Schweißnahtfestigkeit faserverstärkter Thermoplaste
V. Schöppner, I. Fiebig, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[76]
2017 | Journal Article | LibreCat-ID: 22049
Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik 1 (2017) 108–114.
LibreCat
 
[75]
2017 | Conference Paper | LibreCat-ID: 27208
Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics while Measuring by Quasi-Static Tensile Testing
V. Schöppner, J. Walter, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[74]
2017 | Conference Paper | LibreCat-ID: 27210
Energieeintrag in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder
V. Schöppner, K. Westhues, R. Weinlein, A. Knieper, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[73]
2017 | Conference Paper | LibreCat-ID: 27222
Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM)
V. Schöppner, K. Westhues, in: Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[72]
2017 | Conference Paper | LibreCat-ID: 27241
Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
 
[71]
2017 | Conference Paper | LibreCat-ID: 27234
Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot
V. Schöppner, F. Reinders, in: 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[70]
2017 | Journal Article | LibreCat-ID: 27227
Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics
V. Schöppner, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, Welding in the World (2017) 1247–1252.
LibreCat
 
[69]
2017 | Journal Article | LibreCat-ID: 27239
Schnelllaufender Einschneckenextruder mit Direktantrieb
V. Schöppner, M. Schadomsky, C. Diekmann, M. Schneider, Kunststoffe (2017) 170–174.
LibreCat
 
[68]
2016 | Conference Paper | LibreCat-ID: 22019
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
LibreCat | DOI
 
[67]
2016 | Journal Article | LibreCat-ID: 27247
Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, KGK Kautschuk Gummi Kunststoffe (2016) 30–36.
LibreCat
 
[66]
2016 | Journal Article | LibreCat-ID: 27261
Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, International Journal of Polymer Science (2016).
LibreCat
 
[65]
2016 | Conference Paper | LibreCat-ID: 27266
Modellierung des Glasfaserlängenabbaus
V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
 
[64]
2016 | Journal Article | LibreCat-ID: 27273
Realitätsnah und definiert verschmutzen
V. Schöppner, P. Meilwes, Kunststoffe (2016) 80–84.
LibreCat
 
[63]
2016 | Conference Paper | LibreCat-ID: 22039
Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.
LibreCat | DOI
 
[62]
2016 | Conference Paper | LibreCat-ID: 27262
Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[61]
2016 | Journal Article | LibreCat-ID: 27248
Auswirkungen von Betriebsparametern in der Heißluftvulkanisation
V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe (2016) 410–413.
LibreCat
 
[60]
2016 | Journal Article | LibreCat-ID: 27274
Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht
V. Schöppner, I. Fiebig, Jahresmagazin Kunststofftechnik (2016) 120–126.
LibreCat
 
[59]
2016 | Conference Paper | LibreCat-ID: 27263
Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method
V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[58]
2016 | Conference Paper | LibreCat-ID: 27268
Non-Destructive Characterization of Hygrothermally Aged Polymers
V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[57]
2016 | Journal Article | LibreCat-ID: 27249
Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung
V. Schöppner, S. Littek, A. Döring, D. Kuckling, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2016) 18.
LibreCat
 
[56]
2016 | Journal Article | LibreCat-ID: 27270
Partikel und Schmelze im dynamischen Netz
V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.
LibreCat
 
[55]
2016 | Conference Paper | LibreCat-ID: 27275
Several Influences during Examinations of Laser Transmission Welding - Current Status
V. Schöppner, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[54]
2016 | Conference Paper | LibreCat-ID: 27245
A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[53]
2016 | Journal Article | LibreCat-ID: 27271
Plasmaunterstütztes Fügen von Kunststoffen
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
LibreCat
 
[52]
2016 | Conference Paper | LibreCat-ID: 27265
Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[51]
2016 | Conference Paper | LibreCat-ID: 27272
Quality Improvement of FDM Parts by Parameter Optimization
V. Schöppner, A. Bagsik, F. Knoop, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[50]
2016 | Conference Paper | LibreCat-ID: 27258
First Insight into the High Speed Extrusion of Polycarbonate
V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[49]
2016 | Journal Article | LibreCat-ID: 27277
The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials
V. Schöppner, F. Evers, P. Lakemeyer, Welding in the World (2016).
LibreCat
 
[48]
2015 | Newspaper Article | LibreCat-ID: 27305
Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe 68 (2015) 46–58.
LibreCat
 
[47]
2015 | Conference Paper | LibreCat-ID: 27300
Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood
V. Schöppner, F. Reinders, W. Bremser, E. Sabanov, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[46]
2015 | Conference Paper | LibreCat-ID: 27329
Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures
V. Schöppner, N. Fecke, T. Herken, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2015.
LibreCat
 
[45]
2015 | Conference Paper | LibreCat-ID: 27301
Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders
V. Schöppner, J. Leßmann, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[44]
2015 | Conference Paper | LibreCat-ID: 27306
Influence of the Screw Clearances on the Pressure Build-Up
V. Schöppner, T. Herken, M. Hüttner, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[43]
2015 | Conference Paper | LibreCat-ID: 27320
Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders
V. Schöppner, T. Herken, M. Pohl, K. Westhues, in: 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
 
[42]
2015 | Conference Paper | LibreCat-ID: 27318
Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk
V. Schöppner, J. Leßmann, in: 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
 
[41]
2015 | Conference Paper | LibreCat-ID: 27325
Transferbility of Investigation Results for Laser Transmission Welding
V. Schöppner, P. Lakemeyer, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
 
[40]
2015 | Conference Paper | LibreCat-ID: 27319
Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk
V. Schöppner, J. Leßmann, in: 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
 
[39]
2015 | Conference Paper | LibreCat-ID: 27314
Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, in: Deutsche Kautschuk-Tagung (DKT 2015), Nürnberg (Deutschland), 2015.
LibreCat
 
[38]
2015 | Newspaper Article | LibreCat-ID: 27321
Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz
V. Schöppner, T. Herken, M. Hüttner, Prozessoptimierung an Compoundieranlagen (2015).
LibreCat
 
[37]
2015 | Conference Paper | LibreCat-ID: 22031
Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30
F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.
LibreCat | DOI
 
[36]
2015 | Conference Paper | LibreCat-ID: 27308
Investigations of the Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[35]
2015 | Conference Paper | LibreCat-ID: 27310
Laser Transmission Welding of Automotive Headlamps without Clamping Tool
V. Schöppner, P. Lakemeyer, in: GNS8 - International Conference on Thermoplastics Joining, Genua (Italien), 2015.
LibreCat
 
[34]
2015 | Newspaper Article | LibreCat-ID: 27303
Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion
V. Schöppner, S. Brockhaus, GAK Gummi Fasern Kunststoffe 68 (2015) 470–474.
LibreCat
 
[33]
2015 | Conference Paper | LibreCat-ID: 27322
Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section
V. Schöppner, B. Henke, F. Reinders, in: 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[32]
2015 | Conference Paper | LibreCat-ID: 27315
Mixing Behaviour of Pin-Type Rubber Extruders
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, in: Science Meets Tires, Aachen (Deutschland), 2015.
LibreCat
 
[31]
2015 | Conference Paper | LibreCat-ID: 22044
Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12
F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.
LibreCat | DOI
 
[30]
2015 | Newspaper Article | LibreCat-ID: 27296
Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern
V. Schöppner, N. Fecke, T. Herken, Jahresmagazin Kunststofftechnik (2015).
LibreCat
 
[29]
2015 | Conference Paper | LibreCat-ID: 27311
Laser Transmission Welding of Automotive Headlamps without Clamping Tool
V. Schöppner, P. Lakemeyer, in: 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
 
[28]
2014 | Conference Paper | LibreCat-ID: 22021
Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.
LibreCat | DOI
 
[27]
2014 | Conference Paper | LibreCat-ID: 27331
Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures
V. Schöppner, N. Fecke, T. Herken, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[26]
2014 | Conference Paper | LibreCat-ID: 27348
Investigations about High-Speed Rubber Extrusion
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, in: 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
 
[25]
2014 | Conference Paper | LibreCat-ID: 27337
Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation - Auslegung
V. Schöppner, T. Herken, F. Reinders, K. Westhues, in: Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.
LibreCat
 
[24]
2014 | Conference Paper | LibreCat-ID: 27344
Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die
V. Schöppner, B. Henke, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[23]
2014 | Conference Paper | LibreCat-ID: 27332
Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs
V. Schöppner, S. Littek, in: PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
 
[22]
2014 | Conference Paper | LibreCat-ID: 27349
Measurement and Calculation of the Material Degradation of Polystyrene and Modeling of the Degradation by using REX
V. Schöppner, S. Littek, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[21]
2014 | Conference Paper | LibreCat-ID: 27356
Production of Graded Structures in Films
V. Schöppner, A. Wibbeke, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[20]
2014 | Conference Paper | LibreCat-ID: 27363
WPC: Compoundierung und Rezepturen
V. Schöppner, N. Böhm, F. Reinders, in: WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 22030
Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.
LibreCat
 
[18]
2014 | Conference Paper | LibreCat-ID: 27338
Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder
V. Schöppner, N. Fecke, T. Herken, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27357
Stretching of Polycarbonate
V. Schöppner, A. Wibbeke, in: 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
 
[16]
2014 | Newspaper Article | LibreCat-ID: 27341
Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen
V. Schöppner, S. Brockhaus, B. Klie, U. Giese, KGK Kautschuk Gummi Kunststoffe 67 (2014).
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27346
Influence of Flame Retardant Material on the Weld Strength of Plastic Parts
V. Schöppner, F. Evers, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[14]
2014 | Conference Paper | LibreCat-ID: 27334
Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood
V. Schöppner, F. Reinders, in: Biobased Materials 2014 - 10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
LibreCat
 
[13]
2014 | Conference Paper | LibreCat-ID: 27360
The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials
V. Schöppner, F. Evers, P. Lakemeyer, in: 67th Annual Assembly of the International Institute of Welding (IIW), Seoul (Südkorea), 2014.
LibreCat
 
[12]
2014 | Conference Paper | LibreCat-ID: 22018
Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
LibreCat | DOI
 
[11]
2014 | Conference Paper | LibreCat-ID: 27342
Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich
V. Schöppner, N. Böhm, in: 16th Workshop Odour and Emissions of Plastic Materials, Kassel (Deutschland), 2014.
LibreCat
 
[10]
2014 | Conference Paper | LibreCat-ID: 27361
Validation of Discrete Element Simulations in the Field of Solids Conveying in Single-screw Extruders
V. Schöppner, J. Leßmann, in: 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[9]
2014 | Conference Paper | LibreCat-ID: 27354
Optimisation of the Mixing Behaviour of Rubber Pin-Type Extruders
V. Schöppner, M. Schadomsky, F. Lemke, in: 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
 
[8]
2013 | Conference Paper | LibreCat-ID: 22017
Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.
LibreCat | DOI
 
[7]
2012 | Conference Paper | LibreCat-ID: 22016
Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.
LibreCat | DOI
 
[6]
2012 | Conference Paper | LibreCat-ID: 22024
Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.
LibreCat | DOI
 
[5]
2012 | Conference Paper | LibreCat-ID: 22164
Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.
LibreCat
 
[4]
2011 | Conference Paper | LibreCat-ID: 22029
Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.
LibreCat | DOI
 
[3]
2010 | Conference Paper | LibreCat-ID: 23858
Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA
N. Kretzschmar, V. Schöppner, in: Proceedings of the 2010 Summer Computer Simulation Conference, Society for Computer Simulation International, San Diego, CA, USA, 2010, pp. 133–140.
LibreCat
 
[2]
2010 | Conference Paper | LibreCat-ID: 22050
FDM Part Quality Manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.
LibreCat | DOI
 
[1]
2010 | Journal Article | LibreCat-ID: 25092
Residual stresses in the quasi-simultaneous laser transmission welding of amorphous thermoplastics
D. Bonefeld, V. Schöppner, H. Potente, R. Mahnken, A. Shaban, Polymer Engineering & Science (2010) 1520–1526.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Export / Embed