151 Publications

Mark all

[151]
2024 | Special Issue | LibreCat-ID: 51133
Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
LibreCat | DOI | Download (ext.)
 
[150]
2024 | Preprint | LibreCat-ID: 51731 | OA LibreCat | Download (ext.)
 
[149]
2024 | Journal Article | LibreCat-ID: 52357 | OA LibreCat | DOI | Download (ext.)
 
[148]
2023 | Conference Abstract | LibreCat-ID: 44102
Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat
 
[147]
2023 | Journal Article | LibreCat-ID: 36983 | OA LibreCat | DOI | Download (ext.)
 
 
[145]
2023 | Journal Article | LibreCat-ID: 43034 | OA
Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 43128
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
LibreCat | DOI
 
[143]
 
[142]
2023 | Conference Abstract | LibreCat-ID: 44103 LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 46815 | OA
Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Journal Article | LibreCat-ID: 43046 | OA
Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology (2023).
LibreCat | DOI | Download (ext.)
 
[139]
2023 | Book Chapter | LibreCat-ID: 46870
Case Study IV: Individualized Medical Technology using Additive Manufacturing
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
LibreCat | DOI
 
[138]
2023 | Conference Abstract | LibreCat-ID: 47626
Correlation between SLS-Powder processability and particle properties
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
LibreCat
 
[137]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[136]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[135]
2023 | Special Issue | LibreCat-ID: 51136
Large eddy simulation of iron oxide formation in a laboratory spray flame
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Conference Abstract | LibreCat-ID: 51147
Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
LibreCat
 
[133]
2023 | Conference Abstract | LibreCat-ID: 51145
Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster)
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
LibreCat
 
[132]
2023 | Conference Abstract | LibreCat-ID: 51142
Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
LibreCat
 
[131]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51726 LibreCat | Files available
 
[129]
2023 | Conference Paper | LibreCat-ID: 51727
Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
LibreCat | Files available
 
[128]
2022 | Journal Article | LibreCat-ID: 31035 | OA
Model droplet formation in extensional filament stretching within a Filament Extension Atomizer
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Conference Abstract | LibreCat-ID: 37424 LibreCat | Files available
 
[126]
2022 | Journal Article | LibreCat-ID: 35729
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat | Download (ext.)
 
[125]
2022 | Journal Article | LibreCat-ID: 35724
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat | Download (ext.)
 
[124]
2022 | Conference Paper | LibreCat-ID: 37436
Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat | Files available
 
[123]
2022 | Conference Abstract | LibreCat-ID: 37426 LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37432 LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37430 LibreCat
 
[120]
2022 | Conference Abstract | LibreCat-ID: 41160 LibreCat | Files available
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41158
Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 33695
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat
 
[117]
2022 | Conference Abstract | LibreCat-ID: 43238
A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat | Files available
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43243 LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43240 LibreCat | Files available
 
[114]
2022 | Journal Article | LibreCat-ID: 30228
Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat | DOI
 
[113]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat | Download (ext.)
 
[112]
2022 | Journal Article | LibreCat-ID: 44468
A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) B1175–B1194.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 44469
Low Temperature Laser Sintering with PA12 and PA6 on a Standard System
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
LibreCat | DOI
 
[110]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat | DOI | Download (ext.)
 
[109]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat | DOI | Download (ext.)
 
[108]
2021 | Journal Article | LibreCat-ID: 25142
Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
LibreCat | DOI
 
[107]
2021 | Conference Paper | LibreCat-ID: 23760 | OA LibreCat | Download (ext.)
 
[106]
2021 | Conference Abstract | LibreCat-ID: 30364
Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
LibreCat
 
[105]
2021 | Misc | LibreCat-ID: 24202
Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat | Files available
 
[104]
2021 | Conference Abstract | LibreCat-ID: 30225 LibreCat
 
[103]
2021 | Journal Article | LibreCat-ID: 26095 LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation)
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553 LibreCat
 
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221 LibreCat | Files available
 
[98]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
LibreCat | DOI | Download (ext.)
 
[97]
2020 | Report | LibreCat-ID: 24943
Additive Leichtbaustrukturen für die Flugzeugkabine
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat | Download (ext.)
 
[96]
2020 | Journal Article | LibreCat-ID: 24241
An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output
D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.
LibreCat | DOI
 
[95]
2020 | Conference Paper | LibreCat-ID: 22182
Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
LibreCat | DOI
 
[94]
2020 | Conference Abstract | LibreCat-ID: 25062
Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
LibreCat | Files available
 
[93]
2020 | Journal Article | LibreCat-ID: 21949 | OA
Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).
LibreCat | DOI | Download (ext.)
 
[92]
2020 | Journal Article | LibreCat-ID: 21948 | OA
Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).
LibreCat | DOI | Download (ext.)
 
[91]
2019 | Report | LibreCat-ID: 24628
FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
LibreCat
 
[90]
2019 | Book Chapter | LibreCat-ID: 26098
Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges
H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.
LibreCat | DOI
 
[89]
2019 | Conference Paper | LibreCat-ID: 22198
Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
LibreCat | DOI
 
[88]
2019 | Conference Abstract | LibreCat-ID: 24515
Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements
R. Tischendorf, M. Bieber, R. Kneer, H.-J. Schmid, in: PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat | Files available
 
[87]
2019 | Conference Paper | LibreCat-ID: 22202
Devolopment, Production and post-processing of a topology optimized aircraft bracket
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
LibreCat | Download (ext.)
 
[86]
2019 | Journal Article | LibreCat-ID: 22541
Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.
LibreCat | DOI
 
[85]
2018 | Journal Article | LibreCat-ID: 26103
Representative domain size for the simulation of coalescence filtration in nonwoven and foam media
S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.
LibreCat | DOI
 
[84]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
Topology Optimized Heat Transfer Using the Example of an Electronic Housing
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
LibreCat | Download (ext.)
 
[83]
2018 | Journal Article | LibreCat-ID: 22196
Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung
C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.
LibreCat | DOI
 
[82]
2018 | Patent | LibreCat-ID: 29824 LibreCat | Files available
 
[81]
2017 | Book Chapter | LibreCat-ID: 26104
Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613
J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26106
Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.
LibreCat | DOI
 
[79]
2017 | Journal Article | LibreCat-ID: 26107
Distance-dependency of capillary bridges in thermodynamic equilibrium
M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.
LibreCat | DOI
 
[78]
2017 | Book Chapter | LibreCat-ID: 23759
Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.
LibreCat | DOI
 
[77]
2017 | Journal Article | LibreCat-ID: 22195 LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26109
Modelling of temperatures and heat flow within laser sintered part cakes
S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26111 LibreCat | DOI
 
[74]
2016 | Book (Editor) | LibreCat-ID: 26113
Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.
LibreCat | DOI
 
[73]
2016 | Journal Article | LibreCat-ID: 26118
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat | DOI
 
[72]
2016 | Book | LibreCat-ID: 27443
Additive Fertigung
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
LibreCat
 
[71]
2016 | Conference Paper | LibreCat-ID: 22180
Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
LibreCat | DOI
 
[70]
2016 | Journal Article | LibreCat-ID: 22185
Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
LibreCat | DOI
 
[69]
2016 | Conference Paper | LibreCat-ID: 22190
Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22194
Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[67]
2016 | Conference Paper | LibreCat-ID: 22200
Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[66]
2016 | Conference Paper | LibreCat-ID: 22404
Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
LibreCat | DOI
 
[65]
2016 | Conference Paper | LibreCat-ID: 22408
Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[64]
2016 | Journal Article | LibreCat-ID: 21947 LibreCat | DOI | Download (ext.)
 
[63]
2016 | Journal Article | LibreCat-ID: 25140
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat | DOI
 
[62]
2015 | Journal Article | LibreCat-ID: 26108
Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering & Technology (2015) 491–498.
LibreCat | DOI
 
[61]
2015 | Book Chapter | LibreCat-ID: 26119
Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26121
Bipolar charge distribution of a soft X-ray diffusion charger
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26122
On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations
L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26123
Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
LibreCat | DOI
 
[57]
2015 | Journal Article | LibreCat-ID: 26124
Simulation of Capillary Bridges between Particles
M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22178
Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22179
Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22187
Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22189
Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 22199
Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
LibreCat | DOI
 
[51]
2015 | Conference Paper | LibreCat-ID: 23074
Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, H.-J. Schmid, in: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.
LibreCat
 
[50]
2014 | Journal Article | LibreCat-ID: 26125
Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions
S. Pieper, N. Kirchhoff, H.-J. Schmid, Rheologica Acta (2014) 69–75.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26126
Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media
S. Schiller, H.-J. Schmid, Chemical Engineering & Technology (2014) 1009–1020.
LibreCat | DOI
 
[48]
2014 | Journal Article | LibreCat-ID: 26127
Simulation of Capillary Bridges between Nanoscale Particles
M. Dörmann, H.-J. Schmid, Langmuir (2014) 1055–1062.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22176
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22177
Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
LibreCat | DOI
 
[45]
2014 | Conference Paper | LibreCat-ID: 22184
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
LibreCat | DOI
 
[44]
2014 | Journal Article | LibreCat-ID: 22186
A method to characterize the quality of a polymer laser sintering process
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22193
Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
LibreCat | DOI
 
[42]
2014 | Conference Paper | LibreCat-ID: 22203
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26129
Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants
J. Erler, S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Powder Technology 247 (2013) 265–269.
LibreCat | DOI
 
[40]
2013 | Journal Article | LibreCat-ID: 26130
Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter
S. Schiller, H.-J. Schmid, Chemie Ingenieur Technik (2013) 1324–1328.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22175
A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22192
Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22197
Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
LibreCat | DOI
 
[36]
2013 | Conference Paper | LibreCat-ID: 22201
Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
LibreCat
 
[35]
2012 | Journal Article | LibreCat-ID: 26132
Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, H.-J. Schmid, Chemie Ingenieur Technik (2012) 1584–1589.
LibreCat | DOI
 
[34]
2012 | Journal Article | LibreCat-ID: 26133
Sintering kinetics and mechanism of vitreous nanoparticles
M.J. Kirchhof, H. Förster, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 45 (2012) 26–39.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22174
Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
LibreCat | DOI
 
[32]
2012 | Conference Paper | LibreCat-ID: 22204
Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
LibreCat | DOI
 
[31]
2011 | Conference Paper | LibreCat-ID: 22188
Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
LibreCat | DOI
 
[30]
2011 | Book | LibreCat-ID: 22191
Porosity as a key to increase material properties of laser sintered parts
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26134
Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism
R. Körmer, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 1008–1019.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26135
Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations
R. Körmer, M.P.M. Jank, H. Ryssel, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 998–1007.
LibreCat | DOI
 
[27]
2010 | Journal Article | LibreCat-ID: 26136
Interparticle forces in silica nanoparticle agglomerates
M. Seipenbusch, S. Rothenbacher, M. Kirchhoff, H.-J. Schmid, G. Kasper, A.P. Weber, Journal of Nanoparticle Research 12 (2010) 2037–2044.
LibreCat | DOI
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories
V. Vassilev, M. Gröschel, H.-J. Schmid, W. Peukert, G. Leugering, Chemical Engineering Science 65 (2009) 2183–2189.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth
B. Al Zaitone, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 40 (2009) 950–964.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
Liquid–liquid phase transfer of magnetite nanoparticles
S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Colloids and Surfaces A: Physicochemical and Engineering Aspects 348 (2009) 186–190.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
Three-dimensional simulation of viscous-flow agglomerate sintering
M.J. Kirchhof, H.-J. Schmid, W. Peukert, Physical Review E 80 (2009) 026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers
M. Horn, H.-J. Schmid, Powder Technology 186 (2008) 189–198.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces
L. Schneider, H.-J. Schmid, W. Peukert, Applied Physics B 87 (2007) 333–339.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter
H.-J. Schmid, Gefahrstoffe, Reinhaltung der Luft. Air Quality Control 67 (2007).
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
Simulation of the hydrodynamic drag of aggregated particles
C. Binder, C. Feichtinger, H.-J. Schmid, N. Thürey, W. Peukert, U. Rüde, Journal of Colloid and Interface Science 301 (2006) 155–167.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen
M. Horn, H.-J. Schmid, Chemie Ingenieur Technik 78 (2006) 694–699.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150 LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
Predictive simulation of nanoparticle precipitation based on the population balance equation
H.-C. Schwarzer, F. Schwertfirm, M. Manhart, H.-J. Schmid, W. Peukert, Chemical Engineering Science 61 (2005) 167–181.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
Evolution of the fractal dimension for simultaneous coagulation and sintering
H.-J. Schmid, B. Al-Zaitone, C. Artelt, W. Peukert, Chemical Engineering Science 61 (2005) 293–305.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase
C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 36 (2005) 147–172.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering
H.-J. Schmid, S. Tejwani, C. Artelt, W. Peukert, Journal of Nanoparticle Research 6 (2004) 613–626.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
Reactor system for the study of high-temperature short-time sintering of nanoparticles
M.J. Kirchhof, H.-J. Schmid, W. Peukert, Review of Scientific Instruments 75 (2004) 4833–4840.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen
A. Messerer, H.-J. Schmid, C. Knab, U. Pöschl, R. Nießner, Chemie Ingenieur Technik 76 (2004) 1092–1096.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156 LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157 LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik
W. Peukert, H.-J. Schmid, Chemie Ingenieur Technik 75 (2003) 177–183.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations
C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 34 (2003) 511–534.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures
A. Schiel, A.P. Weber, G. Kasper, H.-J. Schmid, Particle & Particle Systems Characterization 19 (2002) 410–418.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow
H.-J. Schmid, S. Veith, H. Umhauer, Particle & Particle Systems Characterization 19 (2002).
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
Trennprozesse: Abschnitt 7.5.3
H.-J. Schmid, in: Handbuch Der Mechanischen Verfahrenstechnik, 2002.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
Novel Concepts for Teaching Particle Technology
H.-J. Schmid, W. Peukert, Chemical Engineering Education 36 (2002).
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators
H.-J. Schmid, Flow, Turbulence and Combustion 68 (2002) 63–89.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
Zum Partikeltransport in Elektrischen Abscheidern
H.-J. Schmid, Zum Partikeltransport in Elektrischen Abscheidern, Shaker Verlag, 1998.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed

151 Publications

Mark all

[151]
2024 | Special Issue | LibreCat-ID: 51133
Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
LibreCat | DOI | Download (ext.)
 
[150]
2024 | Preprint | LibreCat-ID: 51731 | OA LibreCat | Download (ext.)
 
[149]
2024 | Journal Article | LibreCat-ID: 52357 | OA LibreCat | DOI | Download (ext.)
 
[148]
2023 | Conference Abstract | LibreCat-ID: 44102
Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat
 
[147]
2023 | Journal Article | LibreCat-ID: 36983 | OA LibreCat | DOI | Download (ext.)
 
 
[145]
2023 | Journal Article | LibreCat-ID: 43034 | OA
Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 43128
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
LibreCat | DOI
 
[143]
 
[142]
2023 | Conference Abstract | LibreCat-ID: 44103 LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 46815 | OA
Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Journal Article | LibreCat-ID: 43046 | OA
Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology (2023).
LibreCat | DOI | Download (ext.)
 
[139]
2023 | Book Chapter | LibreCat-ID: 46870
Case Study IV: Individualized Medical Technology using Additive Manufacturing
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
LibreCat | DOI
 
[138]
2023 | Conference Abstract | LibreCat-ID: 47626
Correlation between SLS-Powder processability and particle properties
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
LibreCat
 
[137]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[136]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[135]
2023 | Special Issue | LibreCat-ID: 51136
Large eddy simulation of iron oxide formation in a laboratory spray flame
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Conference Abstract | LibreCat-ID: 51147
Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
LibreCat
 
[133]
2023 | Conference Abstract | LibreCat-ID: 51145
Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster)
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
LibreCat
 
[132]
2023 | Conference Abstract | LibreCat-ID: 51142
Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
LibreCat
 
[131]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51726 LibreCat | Files available
 
[129]
2023 | Conference Paper | LibreCat-ID: 51727
Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
LibreCat | Files available
 
[128]
2022 | Journal Article | LibreCat-ID: 31035 | OA
Model droplet formation in extensional filament stretching within a Filament Extension Atomizer
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Conference Abstract | LibreCat-ID: 37424 LibreCat | Files available
 
[126]
2022 | Journal Article | LibreCat-ID: 35729
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat | Download (ext.)
 
[125]
2022 | Journal Article | LibreCat-ID: 35724
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat | Download (ext.)
 
[124]
2022 | Conference Paper | LibreCat-ID: 37436
Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat | Files available
 
[123]
2022 | Conference Abstract | LibreCat-ID: 37426 LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37432 LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37430 LibreCat
 
[120]
2022 | Conference Abstract | LibreCat-ID: 41160 LibreCat | Files available
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41158
Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 33695
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat
 
[117]
2022 | Conference Abstract | LibreCat-ID: 43238
A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat | Files available
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43243 LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43240 LibreCat | Files available
 
[114]
2022 | Journal Article | LibreCat-ID: 30228
Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat | DOI
 
[113]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat | Download (ext.)
 
[112]
2022 | Journal Article | LibreCat-ID: 44468
A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) B1175–B1194.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 44469
Low Temperature Laser Sintering with PA12 and PA6 on a Standard System
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
LibreCat | DOI
 
[110]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat | DOI | Download (ext.)
 
[109]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat | DOI | Download (ext.)
 
[108]
2021 | Journal Article | LibreCat-ID: 25142
Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
LibreCat | DOI
 
[107]
2021 | Conference Paper | LibreCat-ID: 23760 | OA LibreCat | Download (ext.)
 
[106]
2021 | Conference Abstract | LibreCat-ID: 30364
Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
LibreCat
 
[105]
2021 | Misc | LibreCat-ID: 24202
Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat | Files available
 
[104]
2021 | Conference Abstract | LibreCat-ID: 30225 LibreCat
 
[103]
2021 | Journal Article | LibreCat-ID: 26095 LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation)
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553 LibreCat
 
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221 LibreCat | Files available
 
[98]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
LibreCat | DOI | Download (ext.)
 
[97]
2020 | Report | LibreCat-ID: 24943
Additive Leichtbaustrukturen für die Flugzeugkabine
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat | Download (ext.)
 
[96]
2020 | Journal Article | LibreCat-ID: 24241
An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output
D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.
LibreCat | DOI
 
[95]
2020 | Conference Paper | LibreCat-ID: 22182
Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
LibreCat | DOI
 
[94]
2020 | Conference Abstract | LibreCat-ID: 25062
Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
LibreCat | Files available
 
[93]
2020 | Journal Article | LibreCat-ID: 21949 | OA
Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).
LibreCat | DOI | Download (ext.)
 
[92]
2020 | Journal Article | LibreCat-ID: 21948 | OA
Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).
LibreCat | DOI | Download (ext.)
 
[91]
2019 | Report | LibreCat-ID: 24628
FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
LibreCat
 
[90]
2019 | Book Chapter | LibreCat-ID: 26098
Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges
H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.
LibreCat | DOI
 
[89]
2019 | Conference Paper | LibreCat-ID: 22198
Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
LibreCat | DOI
 
[88]
2019 | Conference Abstract | LibreCat-ID: 24515
Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements
R. Tischendorf, M. Bieber, R. Kneer, H.-J. Schmid, in: PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat | Files available
 
[87]
2019 | Conference Paper | LibreCat-ID: 22202
Devolopment, Production and post-processing of a topology optimized aircraft bracket
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
LibreCat | Download (ext.)
 
[86]
2019 | Journal Article | LibreCat-ID: 22541
Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.
LibreCat | DOI
 
[85]
2018 | Journal Article | LibreCat-ID: 26103
Representative domain size for the simulation of coalescence filtration in nonwoven and foam media
S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.
LibreCat | DOI
 
[84]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
Topology Optimized Heat Transfer Using the Example of an Electronic Housing
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
LibreCat | Download (ext.)
 
[83]
2018 | Journal Article | LibreCat-ID: 22196
Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung
C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.
LibreCat | DOI
 
[82]
2018 | Patent | LibreCat-ID: 29824 LibreCat | Files available
 
[81]
2017 | Book Chapter | LibreCat-ID: 26104
Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613
J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26106
Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.
LibreCat | DOI
 
[79]
2017 | Journal Article | LibreCat-ID: 26107
Distance-dependency of capillary bridges in thermodynamic equilibrium
M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.
LibreCat | DOI
 
[78]
2017 | Book Chapter | LibreCat-ID: 23759
Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.
LibreCat | DOI
 
[77]
2017 | Journal Article | LibreCat-ID: 22195 LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26109
Modelling of temperatures and heat flow within laser sintered part cakes
S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26111 LibreCat | DOI
 
[74]
2016 | Book (Editor) | LibreCat-ID: 26113
Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.
LibreCat | DOI
 
[73]
2016 | Journal Article | LibreCat-ID: 26118
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat | DOI
 
[72]
2016 | Book | LibreCat-ID: 27443
Additive Fertigung
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
LibreCat
 
[71]
2016 | Conference Paper | LibreCat-ID: 22180
Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
LibreCat | DOI
 
[70]
2016 | Journal Article | LibreCat-ID: 22185
Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
LibreCat | DOI
 
[69]
2016 | Conference Paper | LibreCat-ID: 22190
Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22194
Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[67]
2016 | Conference Paper | LibreCat-ID: 22200
Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[66]
2016 | Conference Paper | LibreCat-ID: 22404
Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
LibreCat | DOI
 
[65]
2016 | Conference Paper | LibreCat-ID: 22408
Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[64]
2016 | Journal Article | LibreCat-ID: 21947 LibreCat | DOI | Download (ext.)
 
[63]
2016 | Journal Article | LibreCat-ID: 25140
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat | DOI
 
[62]
2015 | Journal Article | LibreCat-ID: 26108
Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering & Technology (2015) 491–498.
LibreCat | DOI
 
[61]
2015 | Book Chapter | LibreCat-ID: 26119
Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26121
Bipolar charge distribution of a soft X-ray diffusion charger
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26122
On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations
L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26123
Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
LibreCat | DOI
 
[57]
2015 | Journal Article | LibreCat-ID: 26124
Simulation of Capillary Bridges between Particles
M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22178
Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22179
Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22187
Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22189
Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 22199
Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
LibreCat | DOI
 
[51]
2015 | Conference Paper | LibreCat-ID: 23074
Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, H.-J. Schmid, in: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.
LibreCat
 
[50]
2014 | Journal Article | LibreCat-ID: 26125
Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions
S. Pieper, N. Kirchhoff, H.-J. Schmid, Rheologica Acta (2014) 69–75.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26126
Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media
S. Schiller, H.-J. Schmid, Chemical Engineering & Technology (2014) 1009–1020.
LibreCat | DOI
 
[48]
2014 | Journal Article | LibreCat-ID: 26127
Simulation of Capillary Bridges between Nanoscale Particles
M. Dörmann, H.-J. Schmid, Langmuir (2014) 1055–1062.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22176
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22177
Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
LibreCat | DOI
 
[45]
2014 | Conference Paper | LibreCat-ID: 22184
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
LibreCat | DOI
 
[44]
2014 | Journal Article | LibreCat-ID: 22186
A method to characterize the quality of a polymer laser sintering process
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22193
Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
LibreCat | DOI
 
[42]
2014 | Conference Paper | LibreCat-ID: 22203
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26129
Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants
J. Erler, S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Powder Technology 247 (2013) 265–269.
LibreCat | DOI
 
[40]
2013 | Journal Article | LibreCat-ID: 26130
Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter
S. Schiller, H.-J. Schmid, Chemie Ingenieur Technik (2013) 1324–1328.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22175
A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22192
Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22197
Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
LibreCat | DOI
 
[36]
2013 | Conference Paper | LibreCat-ID: 22201
Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
LibreCat
 
[35]
2012 | Journal Article | LibreCat-ID: 26132
Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, H.-J. Schmid, Chemie Ingenieur Technik (2012) 1584–1589.
LibreCat | DOI
 
[34]
2012 | Journal Article | LibreCat-ID: 26133
Sintering kinetics and mechanism of vitreous nanoparticles
M.J. Kirchhof, H. Förster, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 45 (2012) 26–39.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22174
Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
LibreCat | DOI
 
[32]
2012 | Conference Paper | LibreCat-ID: 22204
Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
LibreCat | DOI
 
[31]
2011 | Conference Paper | LibreCat-ID: 22188
Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
LibreCat | DOI
 
[30]
2011 | Book | LibreCat-ID: 22191
Porosity as a key to increase material properties of laser sintered parts
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26134
Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism
R. Körmer, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 1008–1019.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26135
Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations
R. Körmer, M.P.M. Jank, H. Ryssel, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 41 (2010) 998–1007.
LibreCat | DOI
 
[27]
2010 | Journal Article | LibreCat-ID: 26136
Interparticle forces in silica nanoparticle agglomerates
M. Seipenbusch, S. Rothenbacher, M. Kirchhoff, H.-J. Schmid, G. Kasper, A.P. Weber, Journal of Nanoparticle Research 12 (2010) 2037–2044.
LibreCat | DOI
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories
V. Vassilev, M. Gröschel, H.-J. Schmid, W. Peukert, G. Leugering, Chemical Engineering Science 65 (2009) 2183–2189.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth
B. Al Zaitone, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 40 (2009) 950–964.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
Liquid–liquid phase transfer of magnetite nanoparticles
S. Machunsky, P. Grimm, H.-J. Schmid, U.A. Peuker, Colloids and Surfaces A: Physicochemical and Engineering Aspects 348 (2009) 186–190.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
Three-dimensional simulation of viscous-flow agglomerate sintering
M.J. Kirchhof, H.-J. Schmid, W. Peukert, Physical Review E 80 (2009) 026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers
M. Horn, H.-J. Schmid, Powder Technology 186 (2008) 189–198.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces
L. Schneider, H.-J. Schmid, W. Peukert, Applied Physics B 87 (2007) 333–339.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter
H.-J. Schmid, Gefahrstoffe, Reinhaltung der Luft. Air Quality Control 67 (2007).
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
Simulation of the hydrodynamic drag of aggregated particles
C. Binder, C. Feichtinger, H.-J. Schmid, N. Thürey, W. Peukert, U. Rüde, Journal of Colloid and Interface Science 301 (2006) 155–167.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen
M. Horn, H.-J. Schmid, Chemie Ingenieur Technik 78 (2006) 694–699.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150 LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
Predictive simulation of nanoparticle precipitation based on the population balance equation
H.-C. Schwarzer, F. Schwertfirm, M. Manhart, H.-J. Schmid, W. Peukert, Chemical Engineering Science 61 (2005) 167–181.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
Evolution of the fractal dimension for simultaneous coagulation and sintering
H.-J. Schmid, B. Al-Zaitone, C. Artelt, W. Peukert, Chemical Engineering Science 61 (2005) 293–305.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase
C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 36 (2005) 147–172.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering
H.-J. Schmid, S. Tejwani, C. Artelt, W. Peukert, Journal of Nanoparticle Research 6 (2004) 613–626.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
Reactor system for the study of high-temperature short-time sintering of nanoparticles
M.J. Kirchhof, H.-J. Schmid, W. Peukert, Review of Scientific Instruments 75 (2004) 4833–4840.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen
A. Messerer, H.-J. Schmid, C. Knab, U. Pöschl, R. Nießner, Chemie Ingenieur Technik 76 (2004) 1092–1096.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156 LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157 LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik
W. Peukert, H.-J. Schmid, Chemie Ingenieur Technik 75 (2003) 177–183.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations
C. Artelt, H.-J. Schmid, W. Peukert, Journal of Aerosol Science 34 (2003) 511–534.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures
A. Schiel, A.P. Weber, G. Kasper, H.-J. Schmid, Particle & Particle Systems Characterization 19 (2002) 410–418.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow
H.-J. Schmid, S. Veith, H. Umhauer, Particle & Particle Systems Characterization 19 (2002).
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
Trennprozesse: Abschnitt 7.5.3
H.-J. Schmid, in: Handbuch Der Mechanischen Verfahrenstechnik, 2002.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
Novel Concepts for Teaching Particle Technology
H.-J. Schmid, W. Peukert, Chemical Engineering Education 36 (2002).
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators
H.-J. Schmid, Flow, Turbulence and Combustion 68 (2002) 63–89.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
Zum Partikeltransport in Elektrischen Abscheidern
H.-J. Schmid, Zum Partikeltransport in Elektrischen Abscheidern, Shaker Verlag, 1998.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed