Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
Download (ext.)
Conference Paper
| Published
| English
Editor
Beaman, Joseph
Department
Abstract
Polymer composites represent the industry standard in injection molding for the production of plastic components with increased requirements in terms of heat resistance and stiffness. In the field of laser sintering (LS), these materials are less common so far. In order to extend the available material variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated within the scope of this work. Here, the resulting properties from two different powder production methods are compared. One filled powder is produced by dry blending and the other powder with the same filler and filling ratio is produced by encapsulating the filler particles inside the polymer particles within the dissolution-precipitation process. It was found that encapsulating the filler particles can provide certain benefits for the processability, for example an improved powder flowability or better filler dispersion. However, encapsulating the filler also alters the thermal properties of the precipitated powder.
Publishing Year
Proceedings Title
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium
Conference
34th Annual International Solid Freeform Fabrication Symposium
Conference Location
Austin
Conference Date
2023-08-14 – 2023-08-16
LibreCat-ID
Cite this
Kletetzka I, Neitzel F, Schmid H-J. Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In: Beaman J, ed. Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium. ; 2023. doi:https://doi.org/10.26153/tsw/50931
Kletetzka, I., Neitzel, F., & Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium. https://doi.org/10.26153/tsw/50931
@inproceedings{Kletetzka_Neitzel_Schmid_2023, place={Laboratory for Freeform Fabrication and University of Texas, Austin}, title={Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering}, DOI={https://doi.org/10.26153/tsw/50931}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}, author={Kletetzka, Ivo and Neitzel, Fabian and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }
Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. https://doi.org/10.26153/tsw/50931.
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.
All files available under the following license(s):
Copyright Statement:
This Item is protected by copyright and/or related rights. [...]
Link(s) to Main File(s)
Access Level
Closed Access
Google Scholar