Experimentally Verified 22 kW, 40 kHz LLC Resonant Converter Design with new Control for a 1 MW Cascaded H-Bridge Converter

Although there are numerous design and control methodologies for the LLC resonant converter, they often do not consider decentralized control strategies to operate them as isolated DC-DC converters within a cascaded H-bridge. The total output power of all LLC converters must be constant to supply a load such as a wa- ter electrolyzer. However, each individual LLC converter can vary its output power as long as the total output power remains constant. This opens new possibilities in increasing the system efficiency and robustness. Usually, the DC-link voltage of each module capacitor shows a 2nd harmonic voltage ripple. However, the total stored energy in all DC-link capacitors is constant within a grid period for a balanced three-phase system. By controlling each LLC converter’s output power locally to be proportional to the energy stored in its DC-link capacitor, modules with a lower instantaneous DC-link voltage transfer less power to the load than modules with a higher DC-link voltage. As a result, a higher efficiency, voltage gain and lower peak resonant capacitor voltage can be achieved with the same components. The 22.2kW experimental prototype of the LLC converter reaches an efficiency of over 97% at resonance which is similar to the precalculated value.