Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
539 Publications
2023 | Book Chapter | LibreCat-ID: 50178
Beule, Felix, et al. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, DVS Media GmbH, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50207
Tews, Karina, et al. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50275
Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50276
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50274
Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 36840
Neumann, Stefan, et al. Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches. doi:10.1016/j.procir.2023.09.019.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50727
Olfert, Viktoria, et al. Methodenentwicklung Zur Prognose Des Crashverhaltens von Widerstandspunktgeschweißten 3-Stahlblechverbindungen. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 51190
Köhler, Daniel, et al. “Comparison of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-20.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51194
Köhler, Daniel, et al. “In-Situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” Lecture Notes in Production Engineering, Springer International Publishing, 2023, doi:10.1007/978-3-031-18318-8_28.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 50551
Haak, Viktor, et al. “Einfluss von Prozessparametern auf Dreiblech-Hybrid-Mischverbindungen beim zweistufigen Widerstandselementschweißen.” 13. Fügetechnisches Gemeinschaftskolloquium, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50547
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.” 25. DVS-Sondertagung Widerstandsschweißen, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 50060
Gilich, Julian, et al. “Influences on the Flow Behavior of Highly Viscous Thermal Interface Materials in the Joining Process.” 14th European Adhesion Conference (EURADH) & 7th World Congress on Adhesion and Related Phenomena (WCARP), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48082 | 
Yang, Keke, et al. “The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths.” Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy), vol. 13, no. 10, MDPI, 2023, doi:10.3390/met13101754.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 47042
Göddecke, Johannes, et al. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau, vol. 92, no. 8, Wiley, 2023, pp. 508–19, doi:10.1002/stab.202300031.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46164
Chudalla, Nick, et al. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.” Adhäsion KLEBEN & DICHTEN, no. 6, 2023, doi:https://doi.org/10.1007/s35145-023-1198-x .
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52614
Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 52688
Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau.” 13. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 52689
Striewe, Marius, et al. “Methode zur Simulation des temperaturabhängigen Crashverhaltens von strukturellen Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44220
Uhe, Benedikt, et al. Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining. Materials Research Proceedings, 2023, doi:10.21741/9781644902417-49.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
Butzhammer, Lorenz, et al. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
Wituschek, Simon, et al. “Combination of Versatile Self-Piercing Riveting Processes.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 29852
Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29855
Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29344
Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30003
Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl-Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Book | LibreCat-ID: 30102
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung für die Simulation mechanischer Fügeprozesse mit besonderer Berücksichtigung fügespezifischer Reibverhältnisse. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 30222
Striewe, Marius, et al. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 27186
Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and Punch Geometry on the Stress State in Small Punch Test .” Engineering Failure Analysis, vol. 136, no. c, Elsevier, 2022, doi:10.1016/j.engfailanal.2022.106183.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30004
Chudalla, Nick, et al. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen .” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30911
Vorderbrüggen, Julian, et al. “Development of a Rivet Geometry for Solid Self-Piercing Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite Structures, vol. 291, 115583, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.115583.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30904
Heyser, Per, et al. “Consideration of the Manufacturing History of Sheet Metal Components for the Adaptation of a Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210775, SAGE Publications, 2022, doi:10.1177/14644207221077560.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30915
Chudalla, Nick, et al. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32155
Beule, Felix, et al. “Influence of Curing-Induced Pre-Deformations on the Mechanical Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32279
Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness for Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery Housings.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32329
Chudalla, Nick, et al. Disjoining and Repair Strategies of Structural Joints in Automotive Lightweight Structures. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32388
Rossel, Moritz Sebastian, and Gerson Meschut. “Method Development for Increasing the Prediction Quality of Mechanical Joining Process Simulations by Friction Modeling Based on Local Joining Process Parameters.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34152
Otroshi, Mortaza, and Gerson Meschut. Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34153
Otroshi, Mortaza, and Gerson Meschut. Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34811
Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on Nearby Overmoulded Plastic Metal Joints.” IIW2022, Annual Assembly, Commission III, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34810
Wippermann, Jan, et al. “Flexible Teilautomatisierung Des Robotergestützten Mechanischen Fügens.” 12. Gemeinsames Kolloquium Zur Mechanischen Fügetechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29296
Schmolke, Tobias, et al. “Weight-Optimized Battery Housings for Volume Vehicles.” ATZ Worldwide, vol. 124, no. 1, 2022, pp. 66–71, doi:https://doi.org/10.1007/s38311-021-0766-7.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 29342
Sander, Sascha, et al. “Methodenentwicklung zur rechnerischen Auslegung geklebter Stahlverbindungen unter Alterungsbeanspruchung im Stahl- und Anlagenbau .” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
LibreCat
2022 | Journal Article | LibreCat-ID: 29295
Schmolke, Tobias, et al. “Gewichtsoptimierte Batteriegehäuse für Volumenfahrzeuge.” ATZ - Automobiltechnische Zeitschrift, vol. 124, no. 1, 2022, pp. 80–85, doi:https://doi.org/10.1007/s35148-021-0785-0.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 31150
Heyser, Per, et al. “Metamodellbasierte Prozesskette - Umformen-Schneiden-Spannen-Fügen.” Pressen, Systeme, Prozesse der Zukunft Effizienz + Digitalisierung, edited by Europäische Forschungsgesellschaft für Blechverarbeitung, vol. T 50, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 31149
Meschut, Gerson, et al. Konzeption einer adaptiven Prozesskette für das mechanische Fügen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31151
Heyser, Per, et al. “Smart Process Chain – Data Analysis in Sheet Metal Processing for Joinability Prediction.” SMART PRODUCTION 2022: DIGITALIZING AUTOMOTIVE MANUFACTURING, Automotive Circle, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31540
Çavdar, Serkan, and Gerson Meschut. “Stress-Based Fatigue Lifetime Prediction of Adhesively Bonded Joints with Hyperelastic Deformation Behavior.” 45th Annual Meeting of The Adhesion Society, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 33499
Otroshi, Mortaza. Damage Modeling in the Numerical Simulation of Mechanical Joining Processes. Shaker Verlag, 2022, doi:https://doi.org/10.2370/9783844087772.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 30123
Otroshi, Mortaza, and Gerson Meschut. Investigation of the Three-Dimensional Stress State during Loading of Self-Piercing Riveted Joints.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33561
Tews, Karina, et al. Experimentelle Untersuchung des Ermüdungsverhaltens und Berechnung der Lebensdauer von Stahlklebverbindungen bei multiaxialer Belastung. 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 33728
Bielak, C. R., et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
LibreCat
| DOI
2022 | Book | LibreCat-ID: 33865
Han, Daxin. Deformationsarme Fügeverbindungen Mittels Prozessoptimiertem Schneidclinchen. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35476
Han, Daxin, and Gerson Meschut. Qualifizierung Mechanischer Fügeverfahren Für Batteriekästen. 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 35518
Haak, Viktor, and Gerson Meschut. “Verfahrenserweiterung des Widerstandselementschweißens für stahlintensive Dreiblech-Hybrid-Mischverbindungen mit zwei höchstfesten Stahlgüten in Mittel- und Basislage.” 12. Fügetechnisches Gemeinschaftskolloquium, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35531
Chudalla, Nick, et al. Efficient Debonding of Adhesively Bonded Joints in Car Body Repair. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32413
Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31330
Beule, Felix, et al. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 095440702211001, SAGE Publications, 2022, doi:10.1177/09544070221100130.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34459
Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 20446
Neumann, Stefan, et al. Robotergestütztes manuelles mechanisches Fügen – RoboterFügen.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29853
Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32392
Duffe, Tobias, et al. “Global Energy Release Rate of Small Penny-Shaped Cracks in Hyperelastic Materials under General Stress Conditions.” Theoretical and Applied Fracture Mechanics, 2022, doi:10.1016/j.tafmec.2022.103461.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 33088
Duffe, Tobias, et al. “Fracture Mechanical Concept to Predict Crack Nucleation in Elastic Adhesive Joints.” ECF23, European Conference on Fracture 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33495
Duffe, Tobias, et al. “Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz.” Fachzeitschrift für Schweißen und verwandte Verfahren, vol. 74, no. 9, DVS, 2022, pp. 570–76.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30153
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 42762
Meyer, Sebastian. Umformtechnisches Fügen von Stanzmuttern während des Formhärtens von 22MnB5. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 43158
Wituschek, Simon, et al. “Geometric and Mechanical Joint Characterization of Conventionally and Tumbled Self-Piercing Riveting Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072211354, SAGE Publications, 2022, doi:10.1177/14644207221135400.
LibreCat
| DOI
2022 | Book | LibreCat-ID: 44199
Chudalla, Nick, et al. Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. P 1396, Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44209
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur . P1399 ed., Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44213
Göddecke, Johannes, et al. Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. Forschungsvereinigung Stahlanwendung e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 42874
Göddecke, Johannes, et al. Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 42875
Göddecke, Johannes, and Gerson Meschut. Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. Edited by Deutscher Verband für Schweißen und verwandte Verfahren e.V. (DVS), 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 43156
Meschut, Gerson, et al. “Mechanical Joining in Versatile Process Chains.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 187–91, doi:10.1007/s11740-022-01125-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 43155
Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 6, Springer Science and Business Media LLC, 2022, pp. 40–43, doi:10.1007/s35145-022-0596-9.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 43157
Werner, Matthias, et al. “Influence of the Incident Angle on the OCT Measurement during Remote Laser Beam Welding.” Procedia CIRP, vol. 111, Elsevier BV, 2022, pp. 513–17, doi:10.1016/j.procir.2022.08.081.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34241
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30884
Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01126-x.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34275
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34244
Kappe, Fabian, et al. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.” Journal of Manufacturing Processes, vol. 84, Elsevier BV, 2022, pp. 1438–48, doi:10.1016/j.jmapro.2022.11.019.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29858
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29857
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36838
Neumann, Stefan, et al. MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30736
Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of Clinching Process Simulations by Modeling the Friction as a Function of Local Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE Publications, 2022, doi:10.1177/14644207221074290.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 28766
Sander, Sascha, et al. “Methodology for the Systematic Investigation of the Hygrothermal-Mechanical Behavior of a Structural Epoxy Adhesive.” International Journal of Adhesion and Adhesives, 103072, Elsevier, 2022, doi:10.1016/j.ijadhadh.2021.103072.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30847
Kuball, Clara-Maria, et al. “Process-Adapted Temperature Application within a Two-Stage Rivet Forming Process for High Nitrogen Steel.” Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2022, pp. 1–17, doi:10.1177/14644207211068693.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 44265
Uhe, Benedikt, and Gerson Meschut. Lösungsstrategien Für Das Halbhohlstanznieten von Höchstfesten Und Ultrahöchstfesten Stählen Mit Aluminiumwerkstoffen. Edited by FOSTA, EFB, DVS, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test to Determine the Friction Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34068
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 44269
Tittmann, Karsten, et al. “Service Strength Analysis Method for Adhesively Bonded Hybrid Structures under Multiaxial Loading.” Proceedings of the 20th European Conference on Composite Materials, edited by Ecole Polytechnique Fédérale de Lausanne (EPFL), vol. 2, 2022, pp. 730–39.
LibreCat