Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
182 Publications
2022 | Journal Article | LibreCat-ID: 31238
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25047 | 
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28017
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, 2021, doi: https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 28440 |
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24426
S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,” Connecticut, USA, 2021, doi: 10.1109/IEMDC47953.2021.9449566.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24589
E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,” Materials & Design, Art. no. 109677, 2021, doi: 10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 26900
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, vol. 23. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 29812
B. Křivská et al., “In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet,” presented at the APCOM 2021, Online, 2021, doi: 10.1063/5.0067491.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 42013
M. Stolbchenko, Zwei-Rollen-Gießwalzen und thermomechanische Behandlung von dünnen Bändern aus der Aluminiumlegierung EN AW-6082. Shaker Verlag, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24006
D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41508
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41511
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41507
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, vol. 28, no. 5, pp. 833–840, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41506
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, vol. 14, no. 23, Art. no. 7190, 2021, doi: 10.3390/ma14237190.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24790
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41516
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, vol. 421, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41512
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41510
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41509
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23898
A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41517
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24243
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29815 |
B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24086
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29813
M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41514
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29814
B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41515
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27700
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24090
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27509
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24087
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24565
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24566 |
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 23897
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23911
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24088
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23803 |
A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 24567
B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24569
B. KŘIVSKÁ, M. ŠLAPÁKOVÁ, O. Grydin, and M. CIESLAR, “Aluminum-steel clad material prepared by twin-roll casting,” 2020, doi: 10.37904/metal.2020.3595.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24570
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, and O. Grydin, “Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding,” Journal of Manufacturing Processes, vol. 58, pp. 857–867, 2020, doi: 10.1016/j.jmapro.2020.08.049.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24574
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, and O. Bobukh, “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050,” Modern Problems of Metallurgy – Scientific Bulletin, vol. 23, pp. 91–101, 2020.
LibreCat
2020 | Book Chapter | LibreCat-ID: 23801
A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 24563
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, pp. 263–270, 2020, doi: 10.1007/s11740-020-01006-2.
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 42012
A. Andreiev, Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften. Books on Demand, 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 42010
M. Wooldridge, Development of SLM Ni-based Superalloys and Investigation of Corrosion Behavior in Chloride-containing Environments. Shaker Verlag, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 41519
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 41518
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 11, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 23797 |
A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 24573 |
O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 24100
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24572
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 41520
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 41521
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 41522
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24571
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24254
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24092
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24255
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24093
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24094
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 24091
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 23899
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 23896
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat
| DOI
2019 | Book Chapter | LibreCat-ID: 24098
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat
| DOI
2019 | Conference (Editor) | LibreCat-ID: 24102
M. Eiber and Deutscher Verband für Materialforschung und -prüfung e.V., Eds., Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, . Berlin, 2019.
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 24103
F. Azarmi, Ed., Adhesion of HVOF sprayed WC-Co coatings on additively processed 316L. Yokohama: ASM International, 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 26898
M. E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, vol. 10. 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 15024
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, and M. Schaper, “Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting,” in PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat
| DOI
2019 | Dissertation | LibreCat-ID: 42011
C. Zinn, Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften. Books on Demand, 2019.
LibreCat
2019 | Book Chapter | LibreCat-ID: 41523
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2019.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 23907
O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 41524
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, no. 9, Art. no. 095701, 2019, doi: 10.1088/1361-6528/ab55bc.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 23900
O. Grydin et al., “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi: 10.1016/j.msea.2019.02.025.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 23901
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat
| DOI
2018 | Conference (Editor) | LibreCat-ID: 24115
M. Eiber, H. A. Richard, and Deutscher Verband für Materialforschung und -prüfung e.V., Eds., Einfluss unterschiedlicher Pulvereigenschaften beim selektiven Laserstrahlschmelzen von TiAl6V4 auf die Werkstoffeigenschaften. Berlin, 2018.
LibreCat
2018 | Conference (Editor) | LibreCat-ID: 24116
M. Eiber and H. A. Richard, Eds., Metallische Legierungssysteme für die additive Fertigung belastungsangepasster Implantate. Berlin, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 24104
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 41525
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 41528
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, vol. 2, no. 1, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 41527
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, vol. 236, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 24107
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 24106
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 23902
O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” JOM, pp. 407–418, 2018, doi: 10.1007/s11837-018-3144-1.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 23903
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, and M. Schaper, “Friction-spinning—Grain structure modification and the impact on stress/strain behaviour,” Journal of Materials Processing Technology, pp. 242–250, 2018, doi: 10.1016/j.jmatprotec.2018.06.015.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 24109
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, pp. 1028–1036, 2017, doi: 10.1002/maco.201709478.
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 24117
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Vieweg, 2017.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 24119
J.-P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ,” in DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 11–22.
LibreCat