Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
182 Publications
2021 | Journal Article | LibreCat-ID: 41510
Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).
LibreCat
| DOI
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).
2021 | Journal Article | LibreCat-ID: 41509
Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).
LibreCat
| DOI
J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).
2021 | Journal Article | LibreCat-ID: 23898
Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).
LibreCat
| DOI
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).
2021 | Journal Article | LibreCat-ID: 41517
Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance 30 (2021) 8048–8056.
LibreCat
| DOI
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance 30 (2021) 8048–8056.
2021 | Journal Article | LibreCat-ID: 24243
Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V
W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology (2021).
LibreCat
| DOI
W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology (2021).
2021 | Journal Article | LibreCat-ID: 29815 |
Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet
B. Křivská, M. Šlapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).
LibreCat
| DOI
| Download (ext.)
B. Křivská, M. Šlapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).
2021 | Journal Article | LibreCat-ID: 24086
Additively processed TiAl6Nb7 alloy for biomedical applications
M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.
LibreCat
| DOI
M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.
2021 | Journal Article | LibreCat-ID: 29813
High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM
M. Cieslar, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, S. Belejová, O. Grydin, M. Stolbchenko, M. Schaper, Microscopy and Microanalysis 27 (2021) 79–80.
LibreCat
| DOI
M. Cieslar, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, S. Belejová, O. Grydin, M. Stolbchenko, M. Schaper, Microscopy and Microanalysis 27 (2021) 79–80.
2021 | Journal Article | LibreCat-ID: 41514
Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).
LibreCat
| DOI
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).
2021 | Journal Article | LibreCat-ID: 29814
Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM
B. Křivská, M. Šlapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, Microscopy and Microanalysis 27 (2021) 91–92.
LibreCat
| DOI
B. Křivská, M. Šlapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, Microscopy and Microanalysis 27 (2021) 91–92.
2021 | Journal Article | LibreCat-ID: 41515
Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).
LibreCat
| DOI
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).
2021 | Journal Article | LibreCat-ID: 27700
Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks
A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).
LibreCat
| DOI
A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).
2021 | Journal Article | LibreCat-ID: 24090
Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2021).
LibreCat
| DOI
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2021).
2021 | Journal Article | LibreCat-ID: 27509
Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal (2021).
LibreCat
| DOI
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal (2021).
2021 | Journal Article | LibreCat-ID: 24087
Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds (2021).
LibreCat
| DOI
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds (2021).
2021 | Journal Article | LibreCat-ID: 24565
Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering 15 (2021) 263–270.
LibreCat
| DOI
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering 15 (2021) 263–270.
2021 | Journal Article | LibreCat-ID: 24566 |
Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.
LibreCat
| DOI
| Download (ext.)
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.
2021 | Journal Article | LibreCat-ID: 23897
Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2021).
LibreCat
| DOI
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2021).
2021 | Journal Article | LibreCat-ID: 23911
Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue (2021).
LibreCat
| DOI
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue (2021).
2021 | Journal Article | LibreCat-ID: 24088
Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing (2021).
LibreCat
| DOI
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing (2021).
2021 | Journal Article | LibreCat-ID: 23803 |
Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods
A. Reitz, O. Grydin, M. Schaper, Materials Data for Smart Forming Technologies (2021).
LibreCat
| Download (ext.)
A. Reitz, O. Grydin, M. Schaper, Materials Data for Smart Forming Technologies (2021).
2021 | Journal Article | LibreCat-ID: 24535
Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).
LibreCat
| DOI
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).
2021 | Journal Article | LibreCat-ID: 24537
Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
2020 | Conference Paper | LibreCat-ID: 24567
Interdiffusion in aluminum-steel clad strip
B. Krivská, M. Šlapáková, M. Kihoulou, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–154.
LibreCat
B. Krivská, M. Šlapáková, M. Kihoulou, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–154.
2020 | Conference Paper | LibreCat-ID: 24569
Aluminum-steel clad material prepared by twin-roll casting
B. KŘIVSKÁ, M. ŠLAPÁKOVÁ, O. Grydin, M. CIESLAR, in: METAL 2020 Conference Proeedings, 2020.
LibreCat
| DOI
B. KŘIVSKÁ, M. ŠLAPÁKOVÁ, O. Grydin, M. CIESLAR, in: METAL 2020 Conference Proeedings, 2020.
2020 | Journal Article | LibreCat-ID: 24570
Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, O. Grydin, Journal of Manufacturing Processes 58 (2020) 857–867.
LibreCat
| DOI
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, O. Grydin, Journal of Manufacturing Processes 58 (2020) 857–867.
2020 | Journal Article | LibreCat-ID: 24574
Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, O. Bobukh, Modern Problems of Metallurgy – Scientific Bulletin 23 (2020) 91–101.
LibreCat
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, O. Bobukh, Modern Problems of Metallurgy – Scientific Bulletin 23 (2020) 91–101.
2020 | Book Chapter | LibreCat-ID: 23801
Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts
A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals & Materials Series, Springer, Cham, 2020.
LibreCat
| DOI
| Download (ext.)
A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals & Materials Series, Springer, Cham, 2020.
2020 | Journal Article | LibreCat-ID: 24563
Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering (2020) 263–270.
LibreCat
| DOI
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering (2020) 263–270.
2020 | Book Chapter | LibreCat-ID: 24575
Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat
| DOI
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.
2020 | Dissertation | LibreCat-ID: 42012
Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften
A. Andreiev, Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften, Books on Demand, 2020.
LibreCat
A. Andreiev, Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften, Books on Demand, 2020.
2020 | Dissertation | LibreCat-ID: 42010
Development of SLM Ni-based Superalloys and Investigation of Corrosion Behavior in Chloride-containing Environments
M. Wooldridge, Development of SLM Ni-Based Superalloys and Investigation of Corrosion Behavior in Chloride-Containing Environments, Shaker Verlag, 2020.
LibreCat
M. Wooldridge, Development of SLM Ni-Based Superalloys and Investigation of Corrosion Behavior in Chloride-Containing Environments, Shaker Verlag, 2020.
2020 | Journal Article | LibreCat-ID: 41519
Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology 29 (2020) 1396–1409.
LibreCat
| DOI
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology 29 (2020) 1396–1409.
2020 | Journal Article | LibreCat-ID: 41518
Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 1452–1464.
LibreCat
| DOI
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 1452–1464.
2020 | Journal Article | LibreCat-ID: 23797 |
Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5
A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions A (2020) 5628–5638.
LibreCat
| DOI
| Download (ext.)
A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions A (2020) 5628–5638.
2020 | Journal Article | LibreCat-ID: 24573 |
New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications
O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).
LibreCat
| DOI
| Download (ext.)
O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).
2020 | Journal Article | LibreCat-ID: 24100
Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties
K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.
LibreCat
| DOI
K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.
2020 | Journal Article | LibreCat-ID: 24572
Strain parameters at hot rolling of aluminum strips reinforced with steel netting
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures & Materials 22 (2020) 2009–2029.
LibreCat
| DOI
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures & Materials 22 (2020) 2009–2029.
2020 | Journal Article | LibreCat-ID: 41520
Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).
LibreCat
| DOI
H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).
2020 | Journal Article | LibreCat-ID: 41521
Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020).
LibreCat
| DOI
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020).
2020 | Journal Article | LibreCat-ID: 41522
Degradable silver‐based alloys
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530.
LibreCat
| DOI
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530.
2020 | Journal Article | LibreCat-ID: 24571
The mechanical properties of rolled wire-reinforced aluminum composites at different strain values
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608.
LibreCat
| DOI
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608.
2020 | Journal Article | LibreCat-ID: 24254
Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.
LibreCat
| DOI
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.
2020 | Journal Article | LibreCat-ID: 24092
Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.
LibreCat
| DOI
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.
2020 | Journal Article | LibreCat-ID: 24255
Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.
LibreCat
| DOI
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.
2020 | Journal Article | LibreCat-ID: 24093
Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
H. Wu, T. Bill, Z. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A (2020).
LibreCat
| DOI
H. Wu, T. Bill, Z. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A (2020).
2020 | Journal Article | LibreCat-ID: 24094
Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology (2020).
LibreCat
| DOI
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology (2020).
2020 | Journal Article | LibreCat-ID: 24091
Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.
LibreCat
| DOI
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.
2020 | Journal Article | LibreCat-ID: 23899
Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020).
LibreCat
| DOI
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020).
2020 | Journal Article | LibreCat-ID: 23896
Degradable silver‐based alloys
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 517–530.
LibreCat
| DOI
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 517–530.
2019 | Book Chapter | LibreCat-ID: 24097
Alloy Design for Biomedical Applications in Additive Manufacturing
K.-P. Hoyer, M. Schaper, in: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat
| DOI
K.-P. Hoyer, M. Schaper, in: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
2019 | Book Chapter | LibreCat-ID: 24098
Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat
| DOI
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
2019 | Conference (Editor) | LibreCat-ID: 24102
Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit,
M. Eiber, Deutscher Verband für Materialforschung und -prüfung e.V., eds., Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, , Berlin, 2019.
LibreCat
M. Eiber, Deutscher Verband für Materialforschung und -prüfung e.V., eds., Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, , Berlin, 2019.
2019 | Conference (Editor) | LibreCat-ID: 24103
Adhesion of HVOF sprayed WC-Co coatings on additively processed 316L
F. Azarmi, ed., Adhesion of HVOF Sprayed WC-Co Coatings on Additively Processed 316L, ASM International, Yokohama, 2019.
LibreCat
F. Azarmi, ed., Adhesion of HVOF Sprayed WC-Co Coatings on Additively Processed 316L, ASM International, Yokohama, 2019.
2019 | Dissertation | LibreCat-ID: 26898
Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung
M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.
LibreCat
M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.
2019 | Conference Paper | LibreCat-ID: 15024
Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, M. Schaper, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat
| DOI
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, M. Schaper, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
2019 | Dissertation | LibreCat-ID: 42011
Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften
C. Zinn, Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften, Books on Demand, 2019.
LibreCat
C. Zinn, Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften, Books on Demand, 2019.
2019 | Book Chapter | LibreCat-ID: 41523
Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2019.
LibreCat
| DOI
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2019.
2019 | Journal Article | LibreCat-ID: 23907
Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082
O. Grydin, N. Sotirov, A. Samsonenko, N. Biba, A. Andreiev, M. Stolbchenko, T. Behr, I. Frolov, M. Schaper, Materials Science Forum (2019) 85–92.
LibreCat
| DOI
O. Grydin, N. Sotirov, A. Samsonenko, N. Biba, A. Andreiev, M. Stolbchenko, T. Behr, I. Frolov, M. Schaper, Materials Science Forum (2019) 85–92.
2019 | Journal Article | LibreCat-ID: 41524
Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties
K. Engelkemeier, J.K.N. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2019).
LibreCat
| DOI
K. Engelkemeier, J.K.N. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2019).
2019 | Journal Article | LibreCat-ID: 23900
Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties
O. Grydin, A. Andreiev, M.J. Holzweißig, C.J. Rüsing, K. Duschik, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2019) 176–195.
LibreCat
| DOI
O. Grydin, A. Andreiev, M.J. Holzweißig, C.J. Rüsing, K. Duschik, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2019) 176–195.
2019 | Journal Article | LibreCat-ID: 23901
Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, M. Schaper, Advanced Engineering Materials (2019).
LibreCat
| DOI
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, M. Schaper, Advanced Engineering Materials (2019).
2018 | Conference Paper | LibreCat-ID: 24105
Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine
S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018.
LibreCat
| DOI
S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018.
2018 | Conference (Editor) | LibreCat-ID: 24115
Einfluss unterschiedlicher Pulvereigenschaften beim selektiven Laserstrahlschmelzen von TiAl6V4 auf die Werkstoffeigenschaften
M. Eiber, H.A. Richard, Deutscher Verband für Materialforschung und -prüfung e.V., eds., Einfluss unterschiedlicher Pulvereigenschaften beim selektiven Laserstrahlschmelzen von TiAl6V4 auf die Werkstoffeigenschaften, Berlin, 2018.
LibreCat
M. Eiber, H.A. Richard, Deutscher Verband für Materialforschung und -prüfung e.V., eds., Einfluss unterschiedlicher Pulvereigenschaften beim selektiven Laserstrahlschmelzen von TiAl6V4 auf die Werkstoffeigenschaften, Berlin, 2018.
2018 | Conference (Editor) | LibreCat-ID: 24116
Metallische Legierungssysteme für die additive Fertigung belastungsangepasster Implantate
M. Eiber, H.A. Richard, eds., Metallische Legierungssysteme für die additive Fertigung belastungsangepasster Implantate, Berlin, 2018.
LibreCat
M. Eiber, H.A. Richard, eds., Metallische Legierungssysteme für die additive Fertigung belastungsangepasster Implantate, Berlin, 2018.
2018 | Journal Article | LibreCat-ID: 24104
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
LibreCat
| DOI
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
2018 | Journal Article | LibreCat-ID: 41525
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing 3 (2018) 221–231.
LibreCat
| DOI
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing 3 (2018) 221–231.
2018 | Journal Article | LibreCat-ID: 41528
Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates
K. Engelkemeier, C. Mücke, K.-P. Hoyer, M. Schaper, Advanced Composites and Hybrid Materials 2 (2018) 189–199.
LibreCat
| DOI
K. Engelkemeier, C. Mücke, K.-P. Hoyer, M. Schaper, Advanced Composites and Hybrid Materials 2 (2018) 189–199.
2018 | Journal Article | LibreCat-ID: 41527
Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers
K. Engelkemeier, K.-P. Hoyer, M. Schaper, Materials Letters 236 (2018) 752–756.
LibreCat
| DOI
K. Engelkemeier, K.-P. Hoyer, M. Schaper, Materials Letters 236 (2018) 752–756.
2018 | Journal Article | LibreCat-ID: 24107
Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates
K. Engelkemeier, C. Mücke, K.-P. Hoyer, M. Schaper, Advanced Composites and Hybrid Materials (2018) 189–199.
LibreCat
| DOI
K. Engelkemeier, C. Mücke, K.-P. Hoyer, M. Schaper, Advanced Composites and Hybrid Materials (2018) 189–199.
2018 | Journal Article | LibreCat-ID: 24106
Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers
K. Engelkemeier, K.-P. Hoyer, M. Schaper, Materials Letters (2018) 752–756.
LibreCat
| DOI
K. Engelkemeier, K.-P. Hoyer, M. Schaper, Materials Letters (2018) 752–756.
2018 | Journal Article | LibreCat-ID: 23902
Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082
O. Grydin, A. Andreiev, N. Sotirov, M. Stolbchenko, T.M. Behr, A. Ashkelianets, I. Frolov, M. Schaper, JOM (2018) 407–418.
LibreCat
| DOI
O. Grydin, A. Andreiev, N. Sotirov, M. Stolbchenko, T.M. Behr, A. Ashkelianets, I. Frolov, M. Schaper, JOM (2018) 407–418.
2018 | Journal Article | LibreCat-ID: 23903
Friction-spinning—Grain structure modification and the impact on stress/strain behaviour
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, M. Schaper, Journal of Materials Processing Technology (2018) 242–250.
LibreCat
| DOI
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, M. Schaper, Journal of Materials Processing Technology (2018) 242–250.
2018 | Conference Paper | LibreCat-ID: 41526
Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine
S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018.
LibreCat
| DOI
S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018.
2017 | Journal Article | LibreCat-ID: 24109
Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting
M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier, Materials and Corrosion (2017) 1028–1036.
LibreCat
| DOI
M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier, Materials and Corrosion (2017) 1028–1036.
2017 | Book Chapter | LibreCat-ID: 24117
Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017.
LibreCat
| DOI
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017.
2017 | Conference Paper | LibreCat-ID: 24119
Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075,
J.-P. Brüggemann, W. Reschetnik, G. Kullmer, H.A. Richard, M.E. Aydinöz, K.-P. Hoyer, M. Schaper, in: Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Berlin, 2017, pp. 11–22.
LibreCat
J.-P. Brüggemann, W. Reschetnik, G. Kullmer, H.A. Richard, M.E. Aydinöz, K.-P. Hoyer, M. Schaper, in: Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Berlin, 2017, pp. 11–22.
2017 | Journal Article | LibreCat-ID: 23904
Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel Research International (2017).
LibreCat
| DOI
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel Research International (2017).
2017 | Journal Article | LibreCat-ID: 23909
Friction-Spinning – Possibility of Grain Structure Adjustment
B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.
LibreCat
| DOI
B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.
2017 | Book Chapter | LibreCat-ID: 23910
A Rapid Heating Method for Press Hardening Processing
A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat
| DOI
A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
2017 | Dissertation | LibreCat-ID: 42009
Randzonenmodifikation von Fe-Basiswerkstoffen auf Grundlage einer Lichtbogenbehandlung
C. Birr, Randzonenmodifikation von Fe-Basiswerkstoffen auf Grundlage einer Lichtbogenbehandlung, Paderborn, 2017.
LibreCat
| DOI
C. Birr, Randzonenmodifikation von Fe-Basiswerkstoffen auf Grundlage einer Lichtbogenbehandlung, Paderborn, 2017.
2017 | Journal Article | LibreCat-ID: 41531
Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting
M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier, Materials and Corrosion 68 (2017) 1028–1036.
LibreCat
| DOI
M. Wiesener, K. Peters, A. Taube, A. Keller, K.-P. Hoyer, T. Niendorf, G. Grundmeier, Materials and Corrosion 68 (2017) 1028–1036.
2017 | Book Chapter | LibreCat-ID: 41529
Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, Wiesbaden, 2017.
LibreCat
| DOI
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, M. Schaper, in: Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, Wiesbaden, 2017.
2017 | Journal Article | LibreCat-ID: 24108
Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design (2017) 136–142.
LibreCat
| DOI
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design (2017) 136–142.
2017 | Journal Article | LibreCat-ID: 41530
Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design 133 (2017) 136–142.
LibreCat
| DOI
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design 133 (2017) 136–142.
2016 | Journal Article | LibreCat-ID: 24111
Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy
W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.A. Richard, Procedia Structural Integrity (2016) 3040–3048.
LibreCat
| DOI
W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.A. Richard, Procedia Structural Integrity (2016) 3040–3048.
2016 | Dissertation | LibreCat-ID: 26901
Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939
P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, 2016.
LibreCat
P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, 2016.
2016 | Journal Article | LibreCat-ID: 41533
Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy
W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.-A. Richard, Procedia Structural Integrity 2 (2016) 3040–3048.
LibreCat
| DOI
W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G. Kullmer, H.-A. Richard, Procedia Structural Integrity 2 (2016) 3040–3048.
2016 | Journal Article | LibreCat-ID: 41532
Hot isostatic pressing of IN718 components manufactured by selective laser melting
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing 13 (2016) 93–102.
LibreCat
| DOI
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing 13 (2016) 93–102.
2016 | Journal Article | LibreCat-ID: 24110
Hot isostatic pressing of IN718 components manufactured by selective laser melting
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing (2016) 93–102.
LibreCat
| DOI
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer, Additive Manufacturing (2016) 93–102.
2016 | Journal Article | LibreCat-ID: 23905
Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching
A. Andreiev, O. Grydin, M. Schaper, Steel Research International (2016) 1733–1741.
LibreCat
| DOI
A. Andreiev, O. Grydin, M. Schaper, Steel Research International (2016) 1733–1741.
2015 | Dissertation | LibreCat-ID: 42001
Optimierung der monotonen und zyklischen Eigenschaften von hoch manganhaltigen TWIP-Stählen – Einfluss von Temperatur und Vorverformung auf die Mikrostrukturentwicklung
C.J. Rüsing, Optimierung der monotonen und zyklischen Eigenschaften von hoch manganhaltigen TWIP-Stählen – Einfluss von Temperatur und Vorverformung auf die Mikrostrukturentwicklung, Paderborn, 2015.
LibreCat
| DOI
C.J. Rüsing, Optimierung der monotonen und zyklischen Eigenschaften von hoch manganhaltigen TWIP-Stählen – Einfluss von Temperatur und Vorverformung auf die Mikrostrukturentwicklung, Paderborn, 2015.
2015 | Conference Paper | LibreCat-ID: 16262
Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
LibreCat
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
2015 | Journal Article | LibreCat-ID: 41534
Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications
T. Niendorf, F. Brenne, K.-P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, H.J. Maier, Metallurgical and Materials Transactions A 46 (2015) 2829–2833.
LibreCat
| DOI
T. Niendorf, F. Brenne, K.-P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, H.J. Maier, Metallurgical and Materials Transactions A 46 (2015) 2829–2833.
2015 | Journal Article | LibreCat-ID: 24112
Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications
T. Niendorf, F. Brenne, K.-P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, H.J. Maier, Metallurgical and Materials Transactions A (2015) 2829–2833.
LibreCat
| DOI
T. Niendorf, F. Brenne, K.-P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, H.J. Maier, Metallurgical and Materials Transactions A (2015) 2829–2833.
2015 | Journal Article | LibreCat-ID: 23906
Testing of pipe sections
A. Andreiev, O. Golovko, I. Frolov, F. Nürnberger, L.O. Wolf, M. Schaper, O. Grydin, Materials Testing (2015) 643–648.
LibreCat
| DOI
A. Andreiev, O. Golovko, I. Frolov, F. Nürnberger, L.O. Wolf, M. Schaper, O. Grydin, Materials Testing (2015) 643–648.
2014 | Dissertation | LibreCat-ID: 24113
Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen
K.-P. Hoyer, Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen, PZH-Verlag, Hannover, Garbsen, 2014.
LibreCat
K.-P. Hoyer, Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen, PZH-Verlag, Hannover, Garbsen, 2014.
2014 | Journal Article | LibreCat-ID: 24114
Influence of aluminium on the corrosion behaviour of binary magnesium-aluminium alloys in saline solutions
K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materials and Corrosion (2014) 23–30.
LibreCat
| DOI
K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materials and Corrosion (2014) 23–30.
2013 | Dissertation | LibreCat-ID: 41994
Einsatzmöglichkeiten und Anwendungsgrenzen der digitalen Bildkorrelation zur Frühdetektion struktureller und funktioneller Schädigungen und Versagensvorhersage in metallischen Werkstoffen, Werkstoffverbunden und Verbundwerkstoffen
B. Gorny, Einsatzmöglichkeiten und Anwendungsgrenzen der digitalen Bildkorrelation zur Frühdetektion struktureller und funktioneller Schädigungen und Versagensvorhersage in metallischen Werkstoffen, Werkstoffverbunden und Verbundwerkstoffen, Paderborn, 2013.
LibreCat
| DOI
B. Gorny, Einsatzmöglichkeiten und Anwendungsgrenzen der digitalen Bildkorrelation zur Frühdetektion struktureller und funktioneller Schädigungen und Versagensvorhersage in metallischen Werkstoffen, Werkstoffverbunden und Verbundwerkstoffen, Paderborn, 2013.
2013 | Journal Article | LibreCat-ID: 46510
Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien
K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materialwissenschaft Und Werkstofftechnik 44 (2013) 84–93.
LibreCat
| DOI
K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materialwissenschaft Und Werkstofftechnik 44 (2013) 84–93.