Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

300 Publications


2018 | Conference Paper | LibreCat-ID: 22150
L. Risse, B. Schramm, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–417.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22183 | OA
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat | Download (ext.)
 

2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22433
J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22434
J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22435
T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22436
A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat | DOI
 

2018 | Book | LibreCat-ID: 22506
U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21696
J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration into Existing Companies,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 14–31.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21991
I. Graessler, P. Scholle, J. Hentze, and C. Oleff, “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS,” in Proceedings of the DESIGN 2018 15th International Design Conference, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21998
I. Gräßler, P. Scholle, J. Hentze, and C. Oleff, “Semi-Automatized Assessment of Requirement Interrelations,” in 15th International Design Conference, 2018, vol. 15, p. S. 325-334.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21999
I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte,” in Design for X - Beiträge zum 29. DfX-Symposium, 2018, vol. 29, pp. 333–344, doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
 

2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Misc | LibreCat-ID: 6594
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 16039
D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22110
A. Taube, “Mechanische und mikrostrukturellen Eigenschaften additiv hergestellter Gitterstrukturen ,” in Hannover Messe Industrie, 2017, Hannover, 2017.
LibreCat
 

2017 | Book | LibreCat-ID: 22112
J. P. Brüggemann, L. Risse, A. Riemer, W. Reschetnik, G. Kullmer, and H. A. Richard, Entwicklung von Fahrradtretkurbelsystemen mittels additiver Fertigung. 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22119
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Methods for crack length measurement for the determination of fracture mechanical parameters of additive manufactured plastics,” in 14th International Conference on Fracture, 2017, vol. 14.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22127
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Risslängenmessung in additiv gefertigten Kunststoffproben auf Basis von Steifigkeitsänderungen infolge Ermüdungswachstum.,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, 2017, pp. 77–88.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22131
W. Reschetnik, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Bruchmechanische Charakterisierung von laserstrahlgeschmolzenen Werkstoffen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 147–156.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22133
J. P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenen Aluminium 7075,” in DVM - Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–20.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22134
L. Risse, J. P. Brüggemann, B. Schramm, G. Kullmer, and H. A. Richard, “Strukturoptimierung von Kurzschaft-Hüftendoprothesen durch den Einsatz der additiven Fertigung,” in DVM - Tagung - Zuverlässigkeit von Implataten und Biostrukturen, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22135
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Vergleich zweier Optimierungsstrategien am Beispiel additiv gefertigter Rennradvorbauten,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2017, pp. 49–66.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22136
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Konzepte zur Risslängenmessung an additive gefertigten Kunststoffen ,” in DVM Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 21–30.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22151
J. P. Brüggemann, L. Risse, B. Schramm, and H. A. Richard, “Entwicklung einer additiv gefertigten Fußorthese,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 26–37.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22153
B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Crack length measurement of additive manufactured plastics based on the current potential drop method.,” in Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22165
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, vol. 68, no. 10, pp. 1028–1036, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 

2017 | Book | LibreCat-ID: 22419
T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21690
G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial Application of Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21691
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21692
A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies - selection of existing parts for increase of acceptance,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21694
J. Büsching and R. Koch, “Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2585–2596.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21695
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21697
G. Deppe and C. Lindemann, “Hybrid Manufacturing with Additive Manufacturing,” CECIMO Magazine, vol. 17, no. 11, pp. 28–29, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21704
T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach for industrializing AM technology - from part selection to test and verification,” Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 6559
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, “Additively manufactured acoustic diffuser structures for ultrasonic measurement applications,” in Proceedings of Meetings on Acoustics, 2017, p. 030004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16063
D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16074
D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,” presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 16075
D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 

2016 | Dissertation | LibreCat-ID: 24774
A. Kloke, Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren, vol. 4. Düren: Shaker Verlag, 2016.
LibreCat | Download (ext.)
 

2016 | Dissertation | LibreCat-ID: 24897
S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, vol. 5. Düren: Düren Verlag GmbH, 2016.
LibreCat | Files available
 

2016 | Dissertation | LibreCat-ID: 26901
P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, vol. 6. 2016.
LibreCat
 

2016 | Report | LibreCat-ID: 23737
S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren, vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22107
J. P. Brüggemann, W. Reschetnik, H. A. Richard, G. Kullmer, and B. Schramm, “Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22109
W. Reschetnik, R. Grylls, B. Bauer, H. A. Richard, and G. Kullmer, “Fatigue Life Manipulation of SLM Parts,” 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22128
J. P. Brüggemann et al., “Optimierung von Fahrradtretkurbeln mittels additiver Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 101–112.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22130
W. Reschetnik, J. P. Brüggemann, M. E. Aydinöz, G. Kullmer, H. A. Richard, and M. Schaper, “Lebensdauerbeeinflussung durch Additive Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 131–140.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22132
A. Riemer, L. Leuders, G. Kullmer, and H. A. Richard, “Materialkennwerte lasergeschmolzener Werkstoffe,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 161–174.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22146
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” in Procedia Structural Integrity, 2016, pp. 3040–3048.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22149
A. Riemer and H. A. Richard, “Crack Propagation in Additive Manufactured Materials and Structures,” in Procedia Structural Integrity, 2016, pp. 1229–1236.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22403
T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2016, pp. 151–160.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21687
G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 81–92.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21688
T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2236–2249.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21689
C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive Manufacturing Technologies,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 93–112.
LibreCat | DOI
 

2016 | Book | LibreCat-ID: 21698
C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
 

2016 | Book | LibreCat-ID: 21699
U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 21702
T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21705
G. Deppe and R. Koch, “Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung,” in Rapid Tech 2016, 2016, vol. 13, pp. 349–360.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21997
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management for additive manufacturing: survey on requirements and current state,” in 14th International DESIGN Conference 2016, 2016, vol. 14.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 16270
T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no. 5, 2016.
LibreCat
 

2015 | Dissertation | LibreCat-ID: 24751
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, vol. Band, 2. Düren: Shaker Verlag GmbH, 2015.
LibreCat | Download (ext.)
 

2015 | Conference Paper | LibreCat-ID: 22108
W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2015, pp. 63–72.
LibreCat
 

Filters and Search Terms

department=219

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed