Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, S., Tominski, J., Magerkohl, S., Künneke, T., Lieneke, T., & Zimmer, D. (2018). Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. Proceedings of the 15th Rapid.Tech Conference, 81–94. https://doi.org/10.3139/9783446458123.005
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, S., Tominski, J., Magerkohl, S., Lieneke, T., Künneke, T., & Zimmer, D. (2018). Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production. 29th Annual International Solid Freeform Fabrication Symposium, 29. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M., Peters, M., Burns, M., Hengsbach, F., & Altmann, A. (2018). Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. Contributed Papers from MS&T17. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 23759
Menge, D., Josupeit, S., Delfs, P., & Schmid, H.-J. (2017). Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen. In H. A. Richard, B. Schramm, & T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen (pp. 105–120). Wiesbaden: Springer Vieweg. https://doi.org/10.1007/978-3-658-17780-5
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22110
Taube, A. (2017). Mechanische und mikrostrukturellen Eigenschaften additiv hergestellter Gitterstrukturen . In Hannover Messe Industrie, 2017, Hannover.
LibreCat
2017 | Book | LibreCat-ID: 22112
Brüggemann, J. P., Risse, L., Riemer, A., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Entwicklung von Fahrradtretkurbelsystemen mittels additiver Fertigung. Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22119
Bauer, B., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Methods for crack length measurement for the determination of fracture mechanical parameters of additive manufactured plastics. In 14th International Conference on Fracture (Vol. 14).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22127
Bauer, B., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Risslängenmessung in additiv gefertigten Kunststoffproben auf Basis von Steifigkeitsänderungen infolge Ermüdungswachstum. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen (pp. 77–88).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22131
Reschetnik, W., Brüggemann, J. P., Kullmer, G., & Richard, H. A. (2017). Bruchmechanische Charakterisierung von laserstrahlgeschmolzenen Werkstoffen. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 147–156).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22133
Brüggemann, J. P., Reschetnik, W., Aydinöz, M. E., Richard, H. A., Kullmer, G., Hoyer, K. P., & Schaper, M. (2017). Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenen Aluminium 7075. In DVM - Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 11–20).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22134
Risse, L., Brüggemann, J. P., Schramm, B., Kullmer, G., & Richard, H. A. (2017). Strukturoptimierung von Kurzschaft-Hüftendoprothesen durch den Einsatz der additiven Fertigung. In DVM - Tagung - Zuverlässigkeit von Implataten und Biostrukturen.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22135
Brüggemann, J. P., Risse, L., Richard, H. A., & Kullmer, G. (2017). Vergleich zweier Optimierungsstrategien am Beispiel additiv gefertigter Rennradvorbauten. In DVM Tagung - Additiv gefertigte Bauteile und Strukturen (pp. 49–66).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22136
Bauer, B., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Konzepte zur Risslängenmessung an additive gefertigten Kunststoffen . In DVM Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen (pp. 21–30).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22151
Brüggemann, J. P., Risse, L., Schramm, B., & Richard, H. A. (2017). Entwicklung einer additiv gefertigten Fußorthese. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 26–37).
LibreCat
2017 | Conference Paper | LibreCat-ID: 22153
Bauer, B., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Crack length measurement of additive manufactured plastics based on the current potential drop method. In Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components.
LibreCat
2017 | Journal Article | LibreCat-ID: 22165
Wiesener, M., Peters, K., Taube, A., Keller, A., Hoyer, K. P., Niendorf, T., & Grundmeier, G. (2017). Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion, 68(10), 1028–1036. https://doi.org/10.1002/maco.201709478
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, S., & Schmid, H.-J. (2017). Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories. Journal of Applied Polymer Science, 134(42). https://doi.org/10.1002/app.45435
LibreCat
| DOI
2017 | Book | LibreCat-ID: 22419
Künneke, T., & Zimmer, D. (2017). Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen (pp. 61–74). Springer Fachmedien Wiesbaden GmbH. https://doi.org/10.1007/978-3-658-17780-5
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick, B., & Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In Proceedings of the 14th Rapid.Tech Conference (pp. 80–93). Hanser Verlag. https://doi.org/10.3139/9783446454606.006
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, T., Adam, G., Josupeit, S., Delfs, P., & Zimmer, D. (2017). Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern. In Proceedings of the 14th Rapid.Tech Conference (pp. 327–344). Hanser Verlag. https://doi.org/10.3139/9783446454606.024
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, F., & Lieneke, T. (2017). Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling. In Inside 3D Printing 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, T., Denzer, V., & Zimmer, D. (2017). Geometrische Toleranzen für additive Fertigungsverfahren. In 3. Summer School Toleranzmangement 2017 (Vol. 3).
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
Eschner, N., Kopf, R., Lieneke, T., Künneke, T., Berger, D., Häfner, B., … Zimmer, D. (2017). Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 112(7–8), 469–472. https://doi.org/10.3139/104.111751
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21690
Deppe, G., Koch, R., & Kaesberg, M. (2017). Rational Decision-Making for the Beneficial Application of Additive Manufacturing. In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2597–2611). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21691
Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for geometry generation for product optimization with Additive Manufacturing. In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21692
Kruse, A., Reiher, T., & Koch, R. (2017). Integrating AM into existing companies - selection of existing parts for increase of acceptance. In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2575–2584). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
Jahnke, U., Koch, R., & Oppermann, A. T. (2017). Design for protection: Systematic approach to prevent product piracy during product development using AM . In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2481–2492). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21694
Büsching, J., & Koch, R. (2017). Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes. In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2585–2596). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21695
Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for geometry generation for product optimization with Additive Manufacturing. In 28th Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21697
Deppe, G., & Lindemann, C. (2017). Hybrid Manufacturing with Additive Manufacturing. CECIMO Magazine, 17(11), 28–29. https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21704
Reiher, T., Lindemann, C., Jahnke, U., Deppe, G., & Koch, R. (2017). Holistic approach for industrializing AM technology - from part selection to test and verification. Progress in Additive Manufacturing, 2, 43–55. https://doi.org/10.1007/s40964-017-0018-y
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Lieneke, T., & Schöppner, V. (2017). Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66. https://doi.org/10.3139/9783446454606.004
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
Schumacher, C., Schöppner, V., & Guntermann, J. (2017). Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process. 28th Annual International Solid Freeform Fabrication Symposium, 28, 470–484. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
Knoop, F., & Schöppner, V. (2017). Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling. 28th Annual International Solid Freeform Fabrication Symposium, 28, 2757–2776. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
Schöppner, V., Schumacher, C., & Guntermann, J. (2017). Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess. Jahresmagazin Kunststofftechnik, 1(1), 108–114.
LibreCat
2017 | Conference Paper | LibreCat-ID: 6559
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2017). Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In Proceedings of Meetings on Acoustics (p. 030004). Honolulu. https://doi.org/10.1121/2.0000688
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
Moritzer, E., Hirsch, A., Günther, K., Sonntag, F., Klotzbach, U., & Lasagni, A. F. (2017). Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems. Micromachines, 8(246). https://doi.org/10.3390/mi8080246
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., & Schöppner, V. (2017). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. JOM: The Journal of The Minerals. Metals & Materials Society (TMS), 563–568. https://doi.org/10.1007/s11837-016-2197-2
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., Kloke, A., & Schöppner, V. (2017). Quality Improvement of FDM Parts by Parameter Optimization . 32nd International Conference of the Polymer Processing Society, 32. https://doi.org/10.1063/1.5016790
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., & Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2016 | Dissertation | LibreCat-ID: 24774
Kloke, A. (2016). Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren (Vol. 4). Shaker Verlag.
LibreCat
| Download (ext.)
2016 | Dissertation | LibreCat-ID: 24897
Leuders, S. (2016). Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen (Vol. 5). Düren Verlag GmbH.
LibreCat
| Files available
2016 | Dissertation | LibreCat-ID: 26901
Kanagarajah, P. (2016). Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939 (Vol. 6).
LibreCat
2016 | Report | LibreCat-ID: 23737
Lammers, S., Quattrone, F., & Mrozek, R. (2016). Machbarkeitsstudie 3D Druck Elektromotoren: Vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22107
Brüggemann, J. P., Reschetnik, W., Richard, H. A., Kullmer, G., & Schramm, B. (2016). Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 290–300). https://doi.org/10.3139/9783446450608.025
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22109
Reschetnik, W., Grylls, R., Bauer, B., Richard, H. A., & Kullmer, G. (2016). Fatigue Life Manipulation of SLM Parts.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22128
Brüggemann, J. P., Riemer, A., Reschetnik, W., Aydinöz, M. E., Kullmer, G., Richard, H. A., & Schaper, M. (2016). Optimierung von Fahrradtretkurbeln mittels additiver Fertigung. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 101–112).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22130
Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Kullmer, G., Richard, H. A., & Schaper, M. (2016). Lebensdauerbeeinflussung durch Additive Fertigung. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 131–140).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22132
Riemer, A., Leuders, L., Kullmer, G., & Richard, H. A. (2016). Materialkennwerte lasergeschmolzener Werkstoffe. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 161–174).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22146
Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Grydin, O., Hoyer, K. P., Kullmer, G., & Richard, H. A. (2016). Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. In Procedia Structural Integrity (pp. 3040–3048).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22149
Riemer, A., & Richard, H. A. (2016). Crack Propagation in Additive Manufactured Materials and Structures. In Procedia Structural Integrity (pp. 1229–1236).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, S., Delfs, P., Menge, D., & Schmid, H.-J. (2016). Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 2077–2086). http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22185
Delfs, P., Tows, M., & Schmid, H.-J. (2016). Optimized build orientation of additive manufactured parts for improved surface quality and build time. Additive Manufacturing, 2(12, Part B), 214–320. https://doi.org/10.1016/j.addma.2016.06.003
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, P., & Schmid, H.-J. (2016). Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts . In Fraunhofer Direct Digital Manufacturing Conference (Vol. 3, pp. 411–414). https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, S., & Schmid, H.-J. (2016). Thermal properties of polyamide 12 powder for application in laser sintering. In International Congress on Particle Technology (PARTEC) .
LibreCat
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H., & Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts: Influences and measures. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 107–120). https://doi.org/10.3139/9783446450608.009
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22403
Künneke, T., & Zimmer, D. (2016). Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. In DVM Tagung - Additiv gefertigte Bauteile und Strukturen (pp. 151–160).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, S., Adam, G., Schmid, H.-J., Mrozek, R., Oberacker, R., Hoffmann, M., … Ponick, B. (2016). Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine. In EDPC 2016. https://doi.org/10.1109/EDPC.2016.7851312
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, S., Delfs, P., Lieneke, T., & Schmid, H.-J. (2016). Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In 27th Annual International Solid Freeform Fabrication Symposium .
LibreCat
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, T., de Groot, S., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting. In ASPE 2016 Summer Topical Meeting (p. S.9-15).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In ASPE Spring Topical Meeting (p. S.3-8). https://doi.org/10.3139/9783446454606.004
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In Summer Topical Meeting 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, T., Denzer, V., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling. In CAT 2016 (Vol. 43, pp. 286–291). https://doi.org/10.1016/j.procir.2016.02.361
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21687
Deppe, G., & Koch, R. (2016). Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 81–92). http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21688
Reiher, T., & Koch, R. (2016). Product optimization with and for Additive Manufacturing. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 2236–2249). http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21689
Lindemann, C., & Koch, R. (2016). Cost Efficient Design and Planning for Additive Manufacturing Technologies. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 93–112). http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf
LibreCat
| DOI
2016 | Book | LibreCat-ID: 21698
Lindemann, C., Deppe, G., & Koch, R. (2016). Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag.
LibreCat
2016 | Book | LibreCat-ID: 21699
Jahnke, U., & Koch, R. (2016). Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag.
LibreCat
2016 | Conference Paper | LibreCat-ID: 21702
Reiher, T., Deppe, G., & Koch, R. (2016). Combining material efficiency and part reliability by product optimization applying additive manufacturing. In International Conference Production Engineering and Management 2016 (Vol. 6, pp. 27–38). https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21705
Deppe, G., & Koch, R. (2016). Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung. In Rapid Tech 2016 (Vol. 13, pp. 349–360). Hanser Verlag. https://doi.org/10.3139/9783446450608.031
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21997
Gräßler, I., Taplick, P., Pottebaum, J., Scholle, P., & Reiher, T. (2016). Data Management for additive manufacturing: survey on requirements and current state. In 14th International DESIGN Conference 2016 (Vol. 14). https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22019
Fischer, M., & Schöppner, V. (2016). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. 27th Annual International Solid Freeform Fabrication Symposium , 27, 563–568. https://doi.org/10.1007/s11837-016-2197-2
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
Moritzer, E., Hirsch, A., Günther, K., Teutoburg-Weiss, S., Lasagni, A. F., Klotzbach, U., & Sonntag, F. (2016). Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme. 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, 6, 65–70.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
Fischer, M., Seewald, O., & Schöppner, V. (2016). Chemical Surface Treatment of Ultem 9085 Parts. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 121–133. https://doi.org/10.3139/9783446450608.010
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
LibreCat
2015 | Dissertation | LibreCat-ID: 24751
Rüsenberg, S. (2015). Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren: Vol. Band, 2. Shaker Verlag GmbH.
LibreCat
| Download (ext.)
2015 | Conference Paper | LibreCat-ID: 22108
Reschetnik, W., Riemer, A., & Richard, H. A. (2015). Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 63–72).
LibreCat
2015 | Conference Paper | LibreCat-ID: 22166
Klemp, E. (2015). Industrial applications in AM - aerospace and overhaul. In ASME AM3D Conference and Expo.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22168
Klemp, E. (2015). Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen. In Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22169
Klemp, E. (2015). Möglichkeiten, Chancen und Mythen additiver Fertigung. In Hanse-Aerospace-Themennachmittag im Hause SLM.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22170
Klemp, E. (2015). Additive Manufacturing - Potenziale, Zukunftschancen und Hürden. In Messe Interzum.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22171
Klemp, E. (2015). Technology Update 2015 for Metals. In SLM-Usermeeting.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22172
Klemp, E. (2015). AM-Verfahren - Möglichkeiten in der industriellen Fertigung. In VDMA - Symposium auf der Hannover Messe Industrie.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, P., Li, Z., & Schmid, H.-J. (2015). Mass finishing of laser sintered parts. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 514–526). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, S., & Schmid, H.-J. (2015). Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 190–199). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, S., Lohn, J., Hermann, E., Gessler, M., Tenbrink, S., & Schmid, H.-J. (2015). Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 540–549). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, P., Toews, M., & Schmid, H.-J. (2015). Surface roughness optimized alignment of parts for additive manufacturing processes. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1334–1344). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, S., Tutzschky, S., Gessler, M., & Schmid, H.-J. (2015). Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In Proceedings of the Rapid Tech 2015 (pp. 63–78). Springer Vieweg. https://doi.org/10.1007/978-3-662-48473-9_5
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 22394
dell’Aere, G., & Zimmer, D. (2015). On design for Additive Manufacturing - evaluating geometrical limitations. Rapid Prototyping Journal, 21(6), 662–670. https://doi.org/10.1108/RPJ-06-2013-0060
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22395
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Proceedings of the Rapid Tech 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
LibreCat
| DOI
2015 | Dissertation | LibreCat-ID: 22397
Adam, G. (2015). Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling. Shaker Verlag.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22398
Adam, G. (2015). On tolerances for additive manufacturing. In Inside 3D Printing Conference and Expo.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, T. (2015). Systematical determination of dimensional tolerances for additive manufacturing . In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26).
LibreCat
2015 | Conference Paper | LibreCat-ID: 21683
Lindemann, C., Jahnke, U., Reiher, T., & Koch, R. (2015). Towards a sustainable and economic selection of part candidates for Additive Manufacturing. In Rapid Prototyping Journal (Vol. 21, pp. 216–227). Emerald. https://doi.org/10.1108/RPJ-12-2014-0179
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21684
Deppe, G., Lindemann, C., & Koch, R. (2015). Developement of an economic decision support for the application of Additive Manufacturing in aerospace. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1560–1563). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf
LibreCat
| DOI