Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2019 | Conference Paper | LibreCat-ID: 22144
Risse, L., Woodcock, S. C., Kullmer, G., Schramm, B., & Richard, H. A. (2019). Reconstruction of a defective finger joint surface and development of an adapted external fixator. In Lecture Notes in Computational Vision and Biomechanics (pp. 230–238).
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, S. H., & Schmid, H.-J. (2019). Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung. Proceedings of the 16th Rapid.Tech Conference. https://doi.org/10.3139/9783446462441.025
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, T., Lieneke, T., Lammers, S., & Zimmer, D. (2019). Design guidelines for post-processing of laser beam melting in context of support structures. In Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing (pp. 137–140). https://www.euspen.eu/knowledge-base/AM19127.pdf
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., & Zimmer, D. (2019). Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing. https://www.euspen.eu/knowledge-base/AM19129.pdf
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
Künneke, T., & Zimmer, D. (2019). Schall mittels Pulver dämpfen. Konstruktionspraxis, 6, 24–26.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22000
Gräßler, I., & Oleff, C. (2019). Risikoorientierte Analyse und Handhabung von Anforderungsänderungen. In Design for X - Beiträge zum 30. DfX-Symposium (Vol. 30, pp. 49–60). https://doi.org/ 10.35199/dfx2019.5
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22001
Gräßler, I., Oleff, C., & Scholle, P. (2019). Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme. In Fachtagung Mechatronik 2019 Paderborn (p. S. 1-6). https://doi.org/ 10.17619/UNIPB/1-791
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22002
Gräßler, I., Thiele, H., Oleff, C., Scholle, P., & Schulze, V. (2019). Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme. In International Conference on Engineering Design (ICED19) (pp. 1265–1274). https://doi.org/10.17619/UNIPB/1-791
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22022
Moritzer, E., Wächter, J., & Elsner, M. (2019). Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength. 30th Annual International Solid Freeform Fabrication Symposium, 30, 856–863. http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf
LibreCat
| DOI
2019 | Misc | LibreCat-ID: 16825
Ahlers, D., & Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.
LibreCat
2019 | Journal Article | LibreCat-ID: 22047
Moritzer, E., Hirsch, A., Heim, H. P., Cherif, C., & Truemper, W. (2019). Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. Welding in the World, 63, 867–873. https://doi.org/10.1007/s40194-019-00714-3
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
Moritzer, E., Hirsch, A., & Bürenhaus, F. I. (2019). Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures. AIP Conference Proceedings, 2065(1). https://doi.org/10.1063/1.5088314
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
Schöppner, V., Schumacher, C., & Fels, C. (2019). A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process. AIP Conference Proceedings. https://doi.org/10.1063/1.5088315
LibreCat
| DOI
2019 | Book | LibreCat-ID: 22026
Moritzer, E., Hirsch, A., & Paulus, S. (2019). Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung (pp. 185–198). Springer Vieweg. https://doi.org/10.1007/978-3-658-27412-2
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 36846
Kruse, A., & Mummert, M. (2019). Mit 3D-Druck umfassende Teilhabe möglich machen . Werkstatt:Dialog, 4, 34–35.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein, S. H., Duchting, A., Reiher, T., Hengsbach, F., Menge, D., & Schmid, H.-J. (2019). Devolopment, Production and post-processing of a topology optimized aircraft bracket . 30th Annual International Solid Freeform Fabrication Symposium, 30, 1932–1945.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22441
Lammers, S., Tominski, J., & Zimmer, D. (2019). Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization. II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 174–185. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22041
Moritzer, E., Hirsch, A., & Hecker, F. (2019). Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components. 30th Annual International Solid Freeform Fabrication Symposium, 30, 705–714. http://dx.doi.org/10.26153/tsw/17308
LibreCat
| DOI
2018 | Report | LibreCat-ID: 23736
Taube, A., Lammers, S., Urbanek, S., & Mrozek, R. (2018). Weichmagnetische Werkstoffe für die additive Fertigung von E-Motoren (Vol. Heft 1286). Forschungsvereinigung Antriebstechnik e.V.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22116
Schafran, T., Schramm, B., & Risse, L. (2018). Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -. In DVM - AK Implantate und Biostrukturen.
LibreCat
2018 | Journal Article | LibreCat-ID: 22117
Schramm, B., Risse, L., Brüggemann, J. P., Richard, H. A., & Kullmer, G. (2018). Additive manufacturing for medical applications. Journal of 3D Printing in Medicine, 2.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22118
Risse, L., Schramm, B., & Schafran, T. (2018). Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen? In PreDay AK Fußchirurgie.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22120
Kummert, C., & Schmid, H.-J. (2018). The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering PA613 Build Part Properties. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22122
Brüggemann, J. P., Risse, L., Grübel, A., Richard, H. A., & Kullmer, G. (2018). Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen. In DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 250, pp. 89–98). https://doi.org/10.1007/978-3-658-27412-2_1
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22125
Dsuban, A., Lohn, J., Brüggemann, J. P., & Kullmer, G. (2018). Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung. In DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 110–110).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22126
Brüggemann, J. P., Risse, L., Richard, H. A., & Kullmer, G. (2018). Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung. In DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 11–21).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22139
Risse, L., Schramm, B., Brüggemann, J. P., Woodcock, S. C., Kullmer, G., & Richard, H. A. (2018). CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren. In DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (Vol. 403, pp. 89–100).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22145
Joy, T. D., Brüggemann, J. P., & Kullmer, G. (2018). Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature. In Procedia Structural Integrity (p. in press).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22147
Brüggemann, J. P., Risse, L., Kullmer, G., Schramm, B., & Richard, H. A. (2018). Optimization of the fracture mechanical properties of additively manufactured EN AW-7075. In Procedia Structural Integrity (p. in press). https://doi.org/10.1016/j.prostr.2018.12.052
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22148
Brüggemann, J. P., Risse, L., Kullmer, G., & Richard, H. A. (2018). Fracture mechanical investigations on selective laser melted TiAl6V4. In Procedia Structural Integrity (p. in press). https://doi.org/10.1016/j.prostr.2018.12.053
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22150
Risse, L., Schramm, B., Brüggemann, J. P., Kullmer, G., & Richard, H. A. (2018). Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen. In Proceedings of the 15th Rapid.Tech Conference (pp. 405–417).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22183 | 
Menge, D., Delfs, P., Töws, M., & Schmid, H.-J. (2018). Topology Optimized Heat Transfer Using the Example of an Electronic Housing. 29th Annual International Solid Freeform Fabrication Symposium, 29, 687–697.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
Kummert, C., Josupeit, S., & Schmid, H.-J. (2018). Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3), 425–430. https://doi.org/10.1007/s11837-017-2658-2
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., … Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22433
Tominski, J., & Lammers, S. (2018). Software-assisted design check of additive manufactured components. In 14th PERMAS Users’ Conference (Vol. 14). https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22434
Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22436
Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., & Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 113(11), 742–745. https://doi.org/10.3139/104.112005
LibreCat
| DOI
2018 | Book | LibreCat-ID: 22506
Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., & Zimmer, D. (2018). Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag. https://doi.org/10.3139/9783446456198.009
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21696
Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., & Koch, R. (2018). Technology Integration into Existing Companies. In 29th Annual International Solid Freeform Fabrication Symposium (Vol. 29, pp. 14–31). http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21991
Graessler, I., Scholle, P., Hentze, J., & Oleff, C. (2018). SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS. In Proceedings of the DESIGN 2018 15th International Design Conference. https://doi.org/10.21278/idc.2018.0298
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21998
Gräßler, I., Scholle, P., Hentze, J., & Oleff, C. (2018). Semi-Automatized Assessment of Requirement Interrelations. In 15th International Design Conference (Vol. 15, p. S. 325-334). https://doi.org/10.21278/idc.2018.0298
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21999
Gräßler, I., Oleff, C., & Scholle, P. (2018). Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte. Design for X - Beiträge Zum 29. DfX-Symposium, 29, 333–344. https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22020
Schumacher, C., Schöppner, V., & Gnaase, S. (2018). Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process. 29th Annual International Solid Freeform Fabrication Symposium, 29, 1112–1120. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., & Schöppner, V. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, 10, 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., Lieneke, T., Schöppner, V., & Zimmer, D. (2018). Additive Fertigung nach Maß. Kunststoffe, 6, 70–73. https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
Schumacher, C., Schöppner, V., & Gnaase, S. (2018). Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process. 29th Annual International Solid Freeform Fabrication Symposium, 29, 1112–1120. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf
LibreCat
| DOI
2018 | Misc | LibreCat-ID: 6594
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, D., & Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22046
Knoop, F., & Schöppner, V. (2018). Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process. SPE ANTEC 2018, 1. https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301
LibreCat
| DOI