Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2018 | Conference Paper | LibreCat-ID: 22150
Risse, L., et al. “Entwicklung von Steifigkeitsangepassten, Lasergeschmolzenen Kurzschaft-Hüftendoprothesen.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–17.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22183 | 
Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 687–97.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22433
Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol. 14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22434
Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22436
Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
LibreCat
| DOI
2018 | Book | LibreCat-ID: 22506
Brückner, Uwe, et al. Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–90, doi:10.3139/9783446456198.009.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21696
Büsching, J., et al. “Technology Integration into Existing Companies.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 14–31, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21991
Graessler, Iris, et al. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.” Proceedings of the DESIGN 2018 15th International Design Conference, 2018, doi:10.21278/idc.2018.0298.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21998
Gräßler, I., et al. “Semi-Automatized Assessment of Requirement Interrelations.” 15th International Design Conference, vol. 15, 2018, p. S. 325-334, doi:10.21278/idc.2018.0298.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21999
Gräßler, I., et al. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.” Design for X - Beiträge Zum 29. DfX-Symposium, vol. 29, 2018, pp. 333–44, doi:https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22020
Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 1112–20, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, vol. 10, VDI Fachmedien GmbH & Co. KG, 2018, pp. 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., et al. “Additive Fertigung Nach Maß.” Kunststoffe, vol. 6, 2018, pp. 70–73, doi:https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 1112–20, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, et al. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22046
Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.” SPE ANTEC 2018, vol. 1, Society of Plastics Engineers , 2018, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi:https://doi.org/10.3139/9783446458123.005.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17, 2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, et al. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard et al., Springer Vieweg, 2017, pp. 105–20, doi:10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22110
Taube, A. “Mechanische Und Mikrostrukturellen Eigenschaften Additiv Hergestellter Gitterstrukturen .” Hannover Messe Industrie, 2017, Hannover, 2017.
LibreCat
2017 | Book | LibreCat-ID: 22112
Brüggemann, J. P., et al. “Entwicklung von Fahrradtretkurbelsystemen Mittels Additiver Fertigung.” Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22119
Bauer, B., et al. “Methods for Crack Length Measurement for the Determination of Fracture Mechanical Parameters of Additive Manufactured Plastics.” 14th International Conference on Fracture, vol. 14, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22127
Bauer, B., et al. “Risslängenmessung in Additiv Gefertigten Kunststoffproben Auf Basis von Steifigkeitsänderungen Infolge Ermüdungswachstum.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2017, pp. 77–88.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22131
Reschetnik, W., et al. “Bruchmechanische Charakterisierung von Laserstrahlgeschmolzenen Werkstoffen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2017, pp. 147–56.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22133
Brüggemann, J. P., et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenen Aluminium 7075.” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2017, pp. 11–20.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22134
Risse, L., et al. “Strukturoptimierung von Kurzschaft-Hüftendoprothesen Durch Den Einsatz Der Additiven Fertigung.” DVM - Tagung - Zuverlässigkeit von Implataten Und Biostrukturen, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22135
Brüggemann, J. P., et al. “Vergleich Zweier Optimierungsstrategien Am Beispiel Additiv Gefertigter Rennradvorbauten.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2017, pp. 49–66.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22136
Bauer, B., et al. “Konzepte Zur Risslängenmessung an Additive Gefertigten Kunststoffen .” DVM Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, 2017, pp. 21–30.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22151
Brüggemann, J. P., et al. “Entwicklung Einer Additiv Gefertigten Fußorthese.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 26–37.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22153
Bauer, B., et al. “Crack Length Measurement of Additive Manufactured Plastics Based on the Current Potential Drop Method.” Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22165
Wiesener, M., et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, vol. 68, no. 10, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42, Wiley, 2017, doi:10.1002/app.45435.
LibreCat
| DOI
2017 | Book | LibreCat-ID: 22419
Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74, doi:10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” 3. Summer School Toleranzmangement 2017, vol. 3, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
Eschner, Niclas, et al. “Kombination Etablierter Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, De Gruyter, 2017, pp. 469–72, doi:10.3139/104.111751.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21690
Deppe, G., et al. “Rational Decision-Making for the Beneficial Application of Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2597–611, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21691
Reiher, T., et al. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21692
Kruse, A., et al. “Integrating AM into Existing Companies - Selection of Existing Parts for Increase of Acceptance.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2575–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
Jahnke, U., et al. “Design for Protection: Systematic Approach to Prevent Product Piracy during Product Development Using AM .” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2481–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21694
Büsching, J., and R. Koch. “Ramp-Up-Management in Additive Manufacturing – Technology Integration in Existing Business Processes.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2585–96, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21695
Reiher, T., et al. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21697
Deppe, G., and C. Lindemann. “Hybrid Manufacturing with Additive Manufacturing.” CECIMO Magazine, vol. 17, no. 11, 2017, pp. 28–29, doi:https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf.
LibreCat
| DOI