Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
986 Publications
2023 | Conference Paper | LibreCat-ID: 48739
E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48734
E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48733
E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48736
E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48747
E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48741
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
V. Schöppner and D. Trienens, “Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau, 2023, doi: 10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
V. Schöppner, M. Altepeter, C. W. T. Schall, S. Wanke, and M. Kley, “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder,” Polymers, p. 10, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 49509
F. Brüning, Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen, vol. Band 1/2023. Düren: Shaker Verlag, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 49725
M. Hartung, Untersuchung der UVC-Bestrahlung als Oberflächenvorbehandlungsmethode von Polycarbonaten zur Erzeugung einer Verbundhaftung zu Flüssigsilikonkautschuken . 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
D. Stüker and V. Schöppner, “An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder,” 2023, doi: 10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber,” 2023, doi: 10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruder using CFD-simulation,” 2023, doi: 10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49742
F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,” 2023, doi: 10.1063/5.0135843.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 49866
A. Tchomgue Simeu and R. Mahnken, “Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites,” PAMM, 2023, doi: 10.1002/pamm.202300136.
LibreCat
| DOI
2023 | Misc | LibreCat-ID: 48335
L. Knorr, A. Jungeilges, F. Pfeifer, S. C. Burmeister, and H. Meschede, Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. Aachen: 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.
LibreCat
2023 | Misc | LibreCat-ID: 49106
A. Jungeilges, Possibilities of Sustainable Heating Methods for Press Hardening Processes. Bad Nauheim: Car Body Parts - Automotive Circle Conference, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49436
M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth, 2023, vol. 18, pp. 99–118.
LibreCat
2023 | Journal Article | LibreCat-ID: 46023
B. Duderija, A. González-Orive, C. Ebbert, V. Neßlinger, A. Keller, and G. Grundmeier, “Electrode Potential-Dependent Studies of Protein Adsorption on Ti6Al4V Alloy,” Molecules, vol. 28, no. 13, Art. no. 5109, 2023, doi: 10.3390/molecules28135109.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 51167
B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi: 10.1016/j.jajp.2023.100181.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48277 | 
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48357
E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,” in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi: 10.1063/5.0168548.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52219
A. Börger and R. Mahnken, “A micropolar model accounting for asymmetric behavior of cold‐box sand in relation to tensile and compression tests,” PAMM, 2023, doi: 10.1002/pamm.202300126.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52800
D. Stüker and V. Schöppner, “Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder,” presented at the PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PPS36, 2023, doi: 10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
V. Schöppner and F. Brüning, “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS-36), Montreal (Kanada), 2023, doi: 10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
S. Vogtschmidt and V. Schöppner, “The short-and long-term properties of welded high-temperature-resistant thermoplastics,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2023, doi: 10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52802
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
M. Altepeter, S. Wanke, and V. Schöppner, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2023, doi: 10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48657
E. Moritzer, L. Tölle, C. Greb, and M. Haag, “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics,” Journal of Composites Science, no. 7, p. 267, 2023, doi: 10.3390/jcs7070267.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
V. Schöppner, M. Altepeter, L. Austermeier, S. Wanke, and P. Meinheit, “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders,” Polymers 2023, no. 15(9), p. 2181, 2023, doi: 10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
V. Schöppner and M. Frank, “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as well as Pressure Throughput Behavior,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2023, doi: 10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
C. W. T. Schall and V. Schöppner, “Design of a test bench for measuring the degradation behavior of plastics during processing,” presented at the PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
V. Schöppner and C. W. T. Schall, “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior,” Materials, no. 16(17), p. 5891, 2023, doi: 10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48654
E. Moritzer and C. Held, “Characterization of additively manufactured parts for direct screwing,” Welding in the World, 2023, doi: 10.1007/s40194-023-01610-7.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
D. Trienens, V. Schöppner, and R. Bunse, “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process,” Polymers 2023, 2023, doi: https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
V. Schöppner and D. Kleinschmidt, “Improvement of a method for the correction of wall slip effects within the rheological measurements of filled rubber compounds,” SPE Polymers, pp. 1–17, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52828
F. Brüning, D. Kleinschmidt, and J. Petzke, “Wall Slip-Free Viscosity Determination of Filled Rubber Compounds Using Steady-State Shear Measurements,” Polymers, pp. 1–23, 2023, doi: https://doi.org/10.3390/polym15224406.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52833
V. Schöppner, L. Austermeier, F. Brüning, J. P. Oldemeier, and O. Brandt, “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung,” EXTRUSION, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
V. Schöppner and T. Arndt, “Anvil-free ultrasonic welding for welding situations with one sided access,” 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52837
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Conformal Cooling at Low Cost,” Plastics Insights, no. 8/2023, pp. 44–48, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 50449
D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques. 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 45831
D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 30894
F. Tuzgel et al., “Testing and modeling blast loading of a sandwich structure cored with a bio-inspired (balanus) core,” Thin-Walled Structures, vol. 175, Art. no. 109185, 2022, doi: 10.1016/j.tws.2022.109185.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30922
S. Wackenrohr et al., “Corrosion fatigue behavior of electron beam melted iron in simulated body fluid,” npj Materials Degradation, vol. 6, no. 1, Art. no. 18, 2022, doi: 10.1038/s41529-022-00226-4.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30923
C. J. J. Torrent et al., “Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties,” Alloys, vol. 1, no. 1, pp. 31–53, 2022, doi: 10.3390/alloys1010004.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29947
C. W. T. Schall and V. Schöppner, “Measurement of material degradation in dependence of shear rate, temperature, and residence time,” Polymer Engineering and Science, vol. 62, no. 3, pp. 815–823, 2022, doi: 10.1002/pen.25887.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 31789
M. Hopp and L. Tölle, “Influence of process parameters on the formation of inhalable fiber dust during shredding for mechanical recycling of fiber‐reinforced organo sheets,” Journal of Applied Polymer Science, pp. 1–13, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 31788
M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé, “Fiber Dust Formation during the Recycling of FRP,” Kunststoffe international, pp. 12–15, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 31787
M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé, “Faserstäube beim FVK-Recycling,” Kunststoffe, pp. 52–55, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32263
N. Filvan Torkaman, M. Kley, W. Bremser, and R. Wilhelm, “Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine,” RSC Advances, vol. 12, no. 27, pp. 17249–17256, 2022, doi: 10.1039/d2ra02566c.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
V. Schöppner, K. Gevers, L. Schraa, and P. Töws, “Auswirkungen unterschiedlicher Erwärmstrategien auf die quasistatische und zyklische Belastbarkeit von infrarotgeschweißten, glasfaserverstärkten Thermoplastbauteilen,” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
V. Schöppner, F. Brüning, and L. Sommer, “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PSS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Auswirkungen des Vorscherungseinflusses im Extrusionsprozess auf die rheologischen Kennwerte gefüllter Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
V. Schöppner, M. Dörner, M. Frank, and C. W. T. Schall, “Auf der Welle zum Mischerfolg,” Kunststoffe, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34724
E. Moritzer and M. Scholle, BMC-Spritzgießen bricht die Glasfaser. 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34732
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Influence of process parameter on fiber quality during fiber recycling through thermal fiber recovery,” RFP Rubber Fibres Plastics, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34729
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Einfluss der Prozessführung auf die Faserqualität beim Faserrecycling mittels thermischer Faserrückgewinnung,” GAK - Gummi Fasern Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
V. Schöppner and D. Kleinschmidt, “Estimation and correction of non-isothermal effects of carbon black-filled rubber compounds in viscosity measurements,” presented at the 14th Rubber Fall Colloquium (KHK), Hannover, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34731
E. Moritzer and M. Richters, “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34741
E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022.
LibreCat
2022 | Report | LibreCat-ID: 34746
M. Hopp and L. Tölle, Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34751
C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken,” presented at the 18. Duisburger Extrusionstagung, Duisburg, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34725
E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33291
E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33001
C. Linnig and T. Tröster, “Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern,” CU reports, 2022.
LibreCat
2022 | Report | LibreCat-ID: 33070
A. Fuhrmann et al., Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33288
E. Moritzer and F. I. Bürenhaus, “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33286
M. Hopp et al., “Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity,” Journal of Material Science and Chemical Engineering, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33290
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Multimaterial Injection Moulding of Thermosets and Elastomers,” presented at the ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33292
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren,” Kunststoffland NRW, pp. 34–35, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33296
E. Moritzer, D. Netzband, and A. Ujma, “Messtechnische Ermittlung der Strukurintensität bei spritzgegossenen, faserverstärkten Kunststoffen,” 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34744
M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33287
E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33289
E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
V. Schöppner, J. Köllermeier, G. Hiesgen, and J. Trippe, “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” presented at the 2nd International Symposium on Plastics Technology, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 36335 |
M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32103
H. Hanses and I. Horwath, “Development of operational and demand-oriented firefighting equipment,” Materials Today: Proceedings, vol. 62, no. 5, pp. 2684–2688, 2022, doi: 10.1016/j.matpr.2022.06.031.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 37258
S. Haller, S. R. Tinkloh, T. Tröster, and R. Brandt, “The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element,” presented at the 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32819
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier, “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,” presented at the 6th International Conference on Steels in Cars and Trucks, Mailand, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37635
M. Dörner, Wave-Schnecken in der Einschneckenextrusion. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37639
L. R. Helmlinger, Untersuchungen zur werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen und Entwicklung eines neuen Aufbereitungsverfahrens. 2022.
LibreCat