Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
984 Publications
2017 | Conference Paper | LibreCat-ID: 16065
Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
LibreCat
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
2017 | Dissertation | LibreCat-ID: 16070
Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen
N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
LibreCat
N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
2017 | Conference Paper | LibreCat-ID: 16071
Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen
Z. Wang, P. Kutz, T. Tröster, in: 2017.
LibreCat
Z. Wang, P. Kutz, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16072
Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH
N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.
LibreCat
N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16073
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
LibreCat
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16074
Materialkombinationen in der additive Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
D. Ahlers, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16075
Aspekte der Produktentwicklung in der additiven Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
D. Ahlers, T. Tröster, in: 2017.
2017 | Journal Article | LibreCat-ID: 22038
Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni, Micromachines 8 (2017).
LibreCat
| DOI
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni, Micromachines 8 (2017).
2017 | Journal Article | LibreCat-ID: 22033
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals & Materials Society (TMS) (2017) 563–568.
LibreCat
| DOI
M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals & Materials Society (TMS) (2017) 563–568.
2017 | Conference Paper | LibreCat-ID: 22023
Quality Improvement of FDM Parts by Parameter Optimization
F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the Polymer Processing Society, American Institute of Physics, 2017.
LibreCat
| DOI
F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the Polymer Processing Society, American Institute of Physics, 2017.
2017 | Conference Paper | LibreCat-ID: 27201
Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden
V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
2017 | Dissertation | LibreCat-ID: 37564
Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen
M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017.
LibreCat
M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017.
2017 | Conference Paper | LibreCat-ID: 19309
MULTIDIMENSIONAL STOCHASTIC MATERIAL MODELING AT LARGE DEFORMATIONS CONSIDERING PARAMETER CORRELATIONS
E. Penner, I. Caylak, R. Mahnken, in: Proceedings of the 2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2017), 2017.
LibreCat
| DOI
E. Penner, I. Caylak, R. Mahnken, in: Proceedings of the 2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2017), 2017.
2017 | Journal Article | LibreCat-ID: 19423
(n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES
R. Mahnken, C. Dammann, P. Lenz, International Journal for Multiscale Computational Engineering (2017) 295–322.
LibreCat
| DOI
R. Mahnken, C. Dammann, P. Lenz, International Journal for Multiscale Computational Engineering (2017) 295–322.
2017 | Journal Article | LibreCat-ID: 21710
Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing
C. Dammann, P. Lenz, R. Mahnken, Procedia CIRP (2017) 51–56.
LibreCat
| DOI
C. Dammann, P. Lenz, R. Mahnken, Procedia CIRP (2017) 51–56.
2017 | Book Chapter | LibreCat-ID: 24521
Thermo-Mechanical Simulation of Hard Turning with Macroscopic Models
E. Uhlmann, R. Mahnken, I.M. Ivanov, C. Cheng, in: Lecture Notes in Production Engineering, Cham, 2017.
LibreCat
| DOI
E. Uhlmann, R. Mahnken, I.M. Ivanov, C. Cheng, in: Lecture Notes in Production Engineering, Cham, 2017.
2017 | Conference Paper | LibreCat-ID: 27220
Investigation of Residual Stress in Laser Transmission Welding of Polypropylene
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, M. Schmidt, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, M. Schmidt, in: 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
2017 | Book | LibreCat-ID: 45108
Effective meso properties for fibre reinforced polymer curing
R. Mahnken, Effective Meso Properties for Fibre Reinforced Polymer Curing, 2017.
LibreCat
| Download (ext.)
R. Mahnken, Effective Meso Properties for Fibre Reinforced Polymer Curing, 2017.
2017 | Conference Paper | LibreCat-ID: 16066
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
2017 | Journal Article | LibreCat-ID: 15961
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
LibreCat
| DOI
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
2017 | Dissertation | LibreCat-ID: 16068
Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen
T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.
LibreCat
T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.
2016 | Journal Article | LibreCat-ID: 25308
The enzyme-mediated autodeposition of casein: effect of enzyme immobilization on deposition of protein structures
A.A. Ruediger, W. Bremser, O.I. Strube, Journal of Coatings Technology and Research (2016) 597–611.
LibreCat
| DOI
A.A. Ruediger, W. Bremser, O.I. Strube, Journal of Coatings Technology and Research (2016) 597–611.
2016 | Journal Article | LibreCat-ID: 25309
Nanoscaled Biocoatings via Enzyme Mediated Autodeposition of Casein
A.A. Ruediger, W. Bremser, O.I. Strube, Macromolecular Materials and Engineering (2016) 1181–1190.
LibreCat
| DOI
A.A. Ruediger, W. Bremser, O.I. Strube, Macromolecular Materials and Engineering (2016) 1181–1190.
2016 | Journal Article | LibreCat-ID: 25310
Influences on the film thickness in the enzymatic autodeposition process of casein
A.A. Ruediger, E. Terborg, W. Bremser, O.I. Strube, Progress in Organic Coatings (2016) 56–61.
LibreCat
| DOI
A.A. Ruediger, E. Terborg, W. Bremser, O.I. Strube, Progress in Organic Coatings (2016) 56–61.
2016 | Journal Article | LibreCat-ID: 25311
Enzyme-Mediated In Situ Synthesis and Deposition of Nonaggregated Melanin Protoparticles
O.I. Strube, A. Büngeler, W. Bremser, Macromolecular Materials and Engineering (2016) 801–804.
LibreCat
| DOI
O.I. Strube, A. Büngeler, W. Bremser, Macromolecular Materials and Engineering (2016) 801–804.
2016 | Conference Paper | LibreCat-ID: 27245
A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Conference Paper | LibreCat-ID: 27246
An Approach to Non-Destructive Testing of Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Journal Article | LibreCat-ID: 27248
Auswirkungen von Betriebsparametern in der Heißluftvulkanisation
V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe (2016) 410–413.
LibreCat
V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe (2016) 410–413.
2016 | Journal Article | LibreCat-ID: 27249
Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung
V. Schöppner, S. Littek, A. Döring, D. Kuckling, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2016) 18.
LibreCat
V. Schöppner, S. Littek, A. Döring, D. Kuckling, Zeitschrift Kunststofftechnik / Journal of Plastics Technology (2016) 18.
2016 | Journal Article | LibreCat-ID: 27250
Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe International (2016) 43–45.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe International (2016) 43–45.
2016 | Conference Paper | LibreCat-ID: 27251
Development of an Inline Plasma Treatment During Injection Molding Process
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
2016 | Conference Paper | LibreCat-ID: 27252
Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints
E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
2016 | Conference Paper | LibreCat-ID: 27253
Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable Structures, Dalheim (Deutschland), 2016.
2016 | Conference Paper | LibreCat-ID: 27254
Experimental Investigations on the Fibre Length Degradation in Injection Moulds
E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Conference Paper | LibreCat-ID: 27255
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
2016 | Conference Paper | LibreCat-ID: 27256
Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
2016 | Conference Paper | LibreCat-ID: 27257
Fiber Length Reduction during Shearing in Polymer Processing
E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Conference Paper | LibreCat-ID: 27258
First Insight into the High Speed Extrusion of Polycarbonate
V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Journal Article | LibreCat-ID: 27259
Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie
E. Moritzer, R. Kleeschulte, S. Zavoral, E. Kaiser, Kunststoffe (2016) 54–58.
LibreCat
E. Moritzer, R. Kleeschulte, S. Zavoral, E. Kaiser, Kunststoffe (2016) 54–58.
2016 | Journal Article | LibreCat-ID: 27260
In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern
E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier, S. Waschke, Kunststoffe (2016) 70–72.
LibreCat
E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier, S. Waschke, Kunststoffe (2016) 70–72.
2016 | Journal Article | LibreCat-ID: 27261
Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, International Journal of Polymer Science (2016).
LibreCat
V. Schöppner, I. Fiebig, International Journal of Polymer Science (2016).
2016 | Conference Paper | LibreCat-ID: 27262
Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics
V. Schöppner, I. Fiebig, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
V. Schöppner, I. Fiebig, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
2016 | Conference Paper | LibreCat-ID: 27263
Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method
V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Journal Article | LibreCat-ID: 27264
Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess
E. Moritzer, Y. Martin, E. Müller, Kunststofftechnik - Spritzgießen 2016 (2016) 27–39.
LibreCat
E. Moritzer, Y. Martin, E. Müller, Kunststofftechnik - Spritzgießen 2016 (2016) 27–39.
2016 | Conference Paper | LibreCat-ID: 27265
Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders
V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
2016 | Conference Paper | LibreCat-ID: 27266
Modellierung des Glasfaserlängenabbaus
V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland), 2016.
2016 | Journal Article | LibreCat-ID: 27267
Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe (2016) 94–96.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe (2016) 94–96.
2016 | Conference Paper | LibreCat-ID: 27268
Non-Destructive Characterization of Hygrothermally Aged Polymers
V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
2016 | Conference Paper | LibreCat-ID: 27269
Organoblechnieten
E. Moritzer, C. Budde, M. Hüttner, in: 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, in: 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
2016 | Journal Article | LibreCat-ID: 27270
Partikel und Schmelze im dynamischen Netz
V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.
LibreCat
V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.
2016 | Journal Article | LibreCat-ID: 27271
Plasmaunterstütztes Fügen von Kunststoffen
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
LibreCat
E. Moritzer, V. Schöppner, P. Lakemeyer, T. Nordmeyer, Joining Plastics (2016) 100–108.
2016 | Conference Paper | LibreCat-ID: 27272
Quality Improvement of FDM Parts by Parameter Optimization
V. Schöppner, A. Bagsik, F. Knoop, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
V. Schöppner, A. Bagsik, F. Knoop, in: 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
2016 | Journal Article | LibreCat-ID: 27273
Realitätsnah und definiert verschmutzen
V. Schöppner, P. Meilwes, Kunststoffe (2016) 80–84.
LibreCat
V. Schöppner, P. Meilwes, Kunststoffe (2016) 80–84.
2016 | Journal Article | LibreCat-ID: 27274
Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht
V. Schöppner, I. Fiebig, Jahresmagazin Kunststofftechnik (2016) 120–126.
LibreCat
V. Schöppner, I. Fiebig, Jahresmagazin Kunststofftechnik (2016) 120–126.
2016 | Conference Paper | LibreCat-ID: 27275
Several Influences during Examinations of Laser Transmission Welding - Current Status
V. Schöppner, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
V. Schöppner, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, D. DuQuesnay, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
2016 | Conference Paper | LibreCat-ID: 27276
The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, M. Webersen, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, M. Webersen, in: 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
2016 | Journal Article | LibreCat-ID: 27277
The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials
V. Schöppner, F. Evers, P. Lakemeyer, Welding in the World (2016).
LibreCat
V. Schöppner, F. Evers, P. Lakemeyer, Welding in the World (2016).
2016 | Journal Article | LibreCat-ID: 27278
Ultraschallbasierte Charakterisierung von gealterten Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Jahresmagazin Kunststofftechnik (2016) 98–103.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Jahresmagazin Kunststofftechnik (2016) 98–103.
2016 | Conference Paper | LibreCat-ID: 27279
Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 18. GMA/ITG Fachtagung Sensoren Und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 18. GMA/ITG Fachtagung Sensoren Und Messsysteme, Nürnberg (Deutschland), 2016.
2016 | Dissertation | LibreCat-ID: 27672
Alterung spritzgegossener thermoplastischer Mikrobauteile
S. Meister, Alterung Spritzgegossener Thermoplastischer Mikrobauteile , 2016.
LibreCat
S. Meister, Alterung Spritzgegossener Thermoplastischer Mikrobauteile , 2016.
2016 | Dissertation | LibreCat-ID: 27673
Einfluss der Nanopartikelgeometrie auf ie Buchzähigkeit und das Ermüdungsrissausbreitungsverhalten von Epoxidharzen
M.H. Kothmann , Einfluss Der Nanopartikelgeometrie Auf Ie Buchzähigkeit Und Das Ermüdungsrissausbreitungsverhalten von Epoxidharzen , 2016.
LibreCat
M.H. Kothmann , Einfluss Der Nanopartikelgeometrie Auf Ie Buchzähigkeit Und Das Ermüdungsrissausbreitungsverhalten von Epoxidharzen , 2016.
2016 | Dissertation | LibreCat-ID: 27674
Rheologische und verarbeitungstechnische Eigenscahften von reaktiv prozessierten Polethelnterephthalaten
M. Härth , Rheologische Und Verarbeitungstechnische Eigenscahften von Reaktiv Prozessierten Polethelnterephthalaten, 2016.
LibreCat
M. Härth , Rheologische Und Verarbeitungstechnische Eigenscahften von Reaktiv Prozessierten Polethelnterephthalaten, 2016.
2016 | Dissertation | LibreCat-ID: 27675
Der Einfluss stoffschlüssiger Fügeverfahren auf die Verbundfestigkeit flammgeschützter Kunststoffe
F. Evers , Der Einfluss Stoffschlüssiger Fügeverfahren Auf Die Verbundfestigkeit Flammgeschützter Kunststoffe , 2016.
LibreCat
F. Evers , Der Einfluss Stoffschlüssiger Fügeverfahren Auf Die Verbundfestigkeit Flammgeschützter Kunststoffe , 2016.
2016 | Dissertation | LibreCat-ID: 27676
Berechnung und Simulation von Feststoffförderprozesse in Einschneckenextrudern bis in den Hochgeschwindigkeitsbereich
S. Leßmann , Berechnung Und Simulation von Feststoffförderprozesse in Einschneckenextrudern Bis in Den Hochgeschwindigkeitsbereich, 2016.
LibreCat
S. Leßmann , Berechnung Und Simulation von Feststoffförderprozesse in Einschneckenextrudern Bis in Den Hochgeschwindigkeitsbereich, 2016.
2016 | Dissertation | LibreCat-ID: 27677
Prozessphasenoptimierte Simulation und Modellierung des Spritzgießsonderverfahrens GITBlow
S. Seidel, Prozessphasenoptimierte Simulation Und Modellierung Des Spritzgießsonderverfahrens GITBlow, 2016.
LibreCat
S. Seidel, Prozessphasenoptimierte Simulation Und Modellierung Des Spritzgießsonderverfahrens GITBlow, 2016.
2016 | Dissertation | LibreCat-ID: 27682
Entwicklung und Validierung konstruktiver Merkmale bei thermoplastischen Kunststoffblindverschraubungen mit dichtendem Hinterschnitt
J. Krugmann , Entwicklung Und Validierung Konstruktiver Merkmale Bei Thermoplastischen Kunststoffblindverschraubungen Mit Dichtendem Hinterschnitt , 2016.
LibreCat
J. Krugmann , Entwicklung Und Validierung Konstruktiver Merkmale Bei Thermoplastischen Kunststoffblindverschraubungen Mit Dichtendem Hinterschnitt , 2016.
2016 | Dissertation | LibreCat-ID: 27683
Verarbeitung von PET auf gleichläufigen Doppelschneckenextrudern
T. Herken , Verarbeitung von PET Auf Gleichläufigen Doppelschneckenextrudern, 2016.
LibreCat
T. Herken , Verarbeitung von PET Auf Gleichläufigen Doppelschneckenextrudern, 2016.
2016 | Dissertation | LibreCat-ID: 27684
Ein Beitrag zur Veränderung der Kunststoffoberfläche durch Atmosphärendruck-Plasma
C. Leister , Ein Beitrag Zur Veränderung Der Kunststoffoberfläche Durch Atmosphärendruck-Plasma, 2016.
LibreCat
C. Leister , Ein Beitrag Zur Veränderung Der Kunststoffoberfläche Durch Atmosphärendruck-Plasma, 2016.
2016 | Journal Article | LibreCat-ID: 20941
Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation
C. Hoppe, C. Ebbert, R. Grothe, H.C. Schmidt, I. Hordych, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1371–1380.
LibreCat
| DOI
| WoS
C. Hoppe, C. Ebbert, R. Grothe, H.C. Schmidt, I. Hordych, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1371–1380.
2016 | Journal Article | LibreCat-ID: 20942
Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation
C. Hoppe, C. Ebbert, M. Voigt, H.C. Schmidt, D. Rodman, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1066–1074.
LibreCat
| DOI
| WoS
C. Hoppe, C. Ebbert, M. Voigt, H.C. Schmidt, D. Rodman, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1066–1074.
2016 | Conference Paper | LibreCat-ID: 22019
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
LibreCat
| DOI
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
2016 | Journal Article | LibreCat-ID: 22025
Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme
E. Moritzer, A. Hirsch, K. Günther, S. Teutoburg-Weiss, A.F. Lasagni, U. Klotzbach, F. Sonntag, 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ 6 (2016) 65–70.
LibreCat
E. Moritzer, A. Hirsch, K. Günther, S. Teutoburg-Weiss, A.F. Lasagni, U. Klotzbach, F. Sonntag, 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ 6 (2016) 65–70.
2016 | Conference Paper | LibreCat-ID: 22039
Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.
LibreCat
| DOI
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.
2016 | Journal Article | LibreCat-ID: 15962
Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology
T. Tröster, A.A. Camberg, B. Sanitther, Z. Wang, C. Lauter, International Journal of Automotive Composites 2 (2016) 229–243.
LibreCat
| DOI
T. Tröster, A.A. Camberg, B. Sanitther, Z. Wang, C. Lauter, International Journal of Automotive Composites 2 (2016) 229–243.
2016 | Conference Paper | LibreCat-ID: 15978
The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments
A. Tasdemirci, F. Tüzgel, E. Güzel, E.F. Akbulut Irmak, M. Güden, in: The British Society for Strain Measurement, 2016.
LibreCat
A. Tasdemirci, F. Tüzgel, E. Güzel, E.F. Akbulut Irmak, M. Güden, in: The British Society for Strain Measurement, 2016.
2016 | Journal Article | LibreCat-ID: 16139
Recyclingkonzepte für hybride Strukturen
S. Schweizer, T. Tröster, Carbon Composites Magazin (2016) 23.
LibreCat
S. Schweizer, T. Tröster, Carbon Composites Magazin (2016) 23.
2016 | Journal Article | LibreCat-ID: 16142
Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies
Z. Wang, M. Riemer, S.F. Koch, D. Barfuss, R. Grützner, F. Augenthaler, J. Schwennen, Advanced Materials Research (2016) 247–254.
LibreCat
| DOI
Z. Wang, M. Riemer, S.F. Koch, D. Barfuss, R. Grützner, F. Augenthaler, J. Schwennen, Advanced Materials Research (2016) 247–254.
2016 | Journal Article | LibreCat-ID: 16144
Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches
S.F. Koch, D. Barfuss, M. Bobbert, L. Groß, R. Grützner, M. Riemer, D. Stefaniak, Z. Wang, Advanced Materials Research (2016) 239–246.
LibreCat
| DOI
S.F. Koch, D. Barfuss, M. Bobbert, L. Groß, R. Grützner, M. Riemer, D. Stefaniak, Z. Wang, Advanced Materials Research (2016) 239–246.
2016 | Dissertation | LibreCat-ID: 16145
Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen
C. Reuter, Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen, 2016.
LibreCat
C. Reuter, Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen, 2016.
2016 | Journal Article | LibreCat-ID: 16146
Technikevaluation für die generative Fertigung eines Serien-Radträgers
V. Grienitz, T. Tröster, S. Meiners, ATZ - Automobiltechnische Zeitschrift (2016) 36–41.
LibreCat
| DOI
V. Grienitz, T. Tröster, S. Meiners, ATZ - Automobiltechnische Zeitschrift (2016) 36–41.
2016 | Conference Paper | LibreCat-ID: 16264
Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren
Z. Wang, T. Tröster, in: 2016.
LibreCat
Z. Wang, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16266
Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe
J.A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, T. Tröster, in: 2016.
LibreCat
J.A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16267
Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites
J.A. Striewe, C. Lauter, C. Reuter, T. Tröster, in: 2016.
LibreCat
J.A. Striewe, C. Lauter, C. Reuter, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16268
Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures
J.A. Striewe, C. Reuter, C. Lauter, T. Tröster, in: 2016.
LibreCat
J.A. Striewe, C. Reuter, C. Lauter, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16269
CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications
Z. Wang, C. Lauter, J. Löseke, T. Tröster, in: 2016.
LibreCat
Z. Wang, C. Lauter, J. Löseke, T. Tröster, in: 2016.
2016 | Journal Article | LibreCat-ID: 16270
Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten
T. Hickmann, D. Ahlers, T. Tröster, Der Stahlformenbauer (2016).
LibreCat
T. Hickmann, D. Ahlers, T. Tröster, Der Stahlformenbauer (2016).
2016 | Journal Article | LibreCat-ID: 27247
Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, KGK Kautschuk Gummi Kunststoffe (2016) 30–36.
LibreCat
V. Schöppner, M. Schadomsky, C. Hopmann, F. Lemke, KGK Kautschuk Gummi Kunststoffe (2016) 30–36.
2016 | Dissertation | LibreCat-ID: 37567
Einsatz der Widerstandserwärmung bei hydraulischen Schneidgeräten zum Trennen von hochfesten Stahlwerkstoffen in Kraftfahrzeugen
B. Siewers, Einsatz der Widerstandserwärmung bei hydraulischen Schneidgeräten zum Trennen von hochfesten Stahlwerkstoffen in Kraftfahrzeugen, Shaker Verlag, 2016.
LibreCat
B. Siewers, Einsatz der Widerstandserwärmung bei hydraulischen Schneidgeräten zum Trennen von hochfesten Stahlwerkstoffen in Kraftfahrzeugen, Shaker Verlag, 2016.
2016 | Journal Article | LibreCat-ID: 24644
A Stochastic Finite Element Method with a Deviatoric-volumetric Split for the Stochastic Linear Isotropic Elasticity Tensor
R. Mahnken, I. Caylak, A. Dridger, A Stochastic Finite Element Method with a Deviatoric-Volumetric Split for the Stochastic Linear Isotropic Elasticity Tensor (2016).
LibreCat
| DOI
R. Mahnken, I. Caylak, A. Dridger, A Stochastic Finite Element Method with a Deviatoric-Volumetric Split for the Stochastic Linear Isotropic Elasticity Tensor (2016).
2016 | Journal Article | LibreCat-ID: 24647
Modeling of variant-interaction during bainitic phase transformation
U. Ehlenbröker, R. Mahnken, M. Petersmann, T. Antretter, IOP Conference Series: Materials Science and Engineering (2016).
LibreCat
| DOI
U. Ehlenbröker, R. Mahnken, M. Petersmann, T. Antretter, IOP Conference Series: Materials Science and Engineering (2016).
2016 | Journal Article | LibreCat-ID: 24642
Extension of a multi-mechanism model: Hardness-based flow and transformation induced plasticity for austenitization
C. Cheng, R. Mahnken, International Journal of Solids and Structures (2016) 127–141.
LibreCat
| DOI
C. Cheng, R. Mahnken, International Journal of Solids and Structures (2016) 127–141.
2016 | Journal Article | LibreCat-ID: 26269
Macromodelling of Transformation Induced Plasticity combined with Viscoplasticity for Low-Alloy Steels
A. Schneidt, R. Mahnken, Steel Research International (2016) 116–123.
LibreCat
| DOI
A. Schneidt, R. Mahnken, Steel Research International (2016) 116–123.
2016 | Journal Article | LibreCat-ID: 24646
Determination of effective properties for CFRP curing coupled to viscoleasticity based on a three-scale framework
C. Dammann, R. Mahnken, PAMM (2016) 517–518.
LibreCat
| DOI
C. Dammann, R. Mahnken, PAMM (2016) 517–518.
2016 | Journal Article | LibreCat-ID: 24645
A thermodynamic framework for coupled multiphase field and diffusion models for lower bainite transformation
M. Düsing, R. Mahnken, PAMM (2016) 321–322.
LibreCat
| DOI
M. Düsing, R. Mahnken, PAMM (2016) 321–322.
2016 | Journal Article | LibreCat-ID: 24643
Two accuracy improvements on nonuniform transformation field analysis for plasticity coupled to softening
X. Ju, R. Mahnken, PAMM (2016) 527–528.
LibreCat
| DOI
X. Ju, R. Mahnken, PAMM (2016) 527–528.
2016 | Journal Article | LibreCat-ID: 24652
A thermodynamic framework for coupled multiphase Ginzburg-Landau/Cahn-Hilliard systems for simulation of lower bainitic transformation
M. Düsing, R. Mahnken, Archive of Applied Mechanics (2016) 1947–1964.
LibreCat
| DOI
M. Düsing, R. Mahnken, Archive of Applied Mechanics (2016) 1947–1964.
2016 | Journal Article | LibreCat-ID: 24651
A three-scale framework for fibre-reinforced-polymer curing part II: Mesoscopic modeling and macroscopic effective properties
R. Mahnken, C. Dammann, International Journal of Solids and Structures (2016) 356–375.
LibreCat
| DOI
R. Mahnken, C. Dammann, International Journal of Solids and Structures (2016) 356–375.
2016 | Journal Article | LibreCat-ID: 24655
A three-scale framework for fibre-reinforced-polymer curing Part I: Microscopic modeling and mesoscopic effective properties
R. Mahnken, C. Dammann, International Journal of Solids and Structures (2016) 341–355.
LibreCat
| DOI
R. Mahnken, C. Dammann, International Journal of Solids and Structures (2016) 341–355.
2016 | Journal Article | LibreCat-ID: 24654
An NTFA-based homogenization framework considering softening effects
X. Ju, R. Mahnken, Mechanics of Materials (2016) 106–125.
LibreCat
| DOI
X. Ju, R. Mahnken, Mechanics of Materials (2016) 106–125.
2016 | Journal Article | LibreCat-ID: 24653
The concept of generalized stresses for computational manufacturing and beyond
R. Mahnken, C. Cheng, M. Düsing, U. Ehlenbröker, T. Leismann, GAMM-Mitteilungen (2016) 229–265.
LibreCat
| DOI
R. Mahnken, C. Cheng, M. Düsing, U. Ehlenbröker, T. Leismann, GAMM-Mitteilungen (2016) 229–265.