Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
986 Publications
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
LibreCat
2017 | Dissertation | LibreCat-ID: 16070
Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
Moritzer, E., Hirsch, A., Günther, K., Sonntag, F., Klotzbach, U., & Lasagni, A. F. (2017). Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems. Micromachines, 8(246). https://doi.org/10.3390/mi8080246
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., & Schöppner, V. (2017). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. JOM: The Journal of The Minerals. Metals & Materials Society (TMS), 563–568. https://doi.org/10.1007/s11837-016-2197-2
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., Kloke, A., & Schöppner, V. (2017). Quality Improvement of FDM Parts by Parameter Optimization . 32nd International Conference of the Polymer Processing Society, 32. https://doi.org/10.1063/1.5016790
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27201
Schöppner, V., Schadomsky, M., & Walter, J. (2017). Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden. 25. Fachtagung Technomer. 25. Fachtagung Technomer, Chemnitz (Deutschland).
LibreCat
2017 | Dissertation | LibreCat-ID: 37564
Frantz, M. M. (2017). Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen: Vol. 2017,25. Shaker Verlag.
LibreCat
2017 | Conference Paper | LibreCat-ID: 19309
Penner, E., Caylak, I., & Mahnken, R. (2017). MULTIDIMENSIONAL STOCHASTIC MATERIAL MODELING AT LARGE DEFORMATIONS CONSIDERING PARAMETER CORRELATIONS. Proceedings of the 2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2017). https://doi.org/10.7712/120217.5391.16785
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 19423
Mahnken, R., Dammann, C., & Lenz, P. (2017). (n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES. International Journal for Multiscale Computational Engineering, 295–322. https://doi.org/10.1615/intjmultcompeng.2017020304
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21710
Dammann, C., Lenz, P., & Mahnken, R. (2017). Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing. Procedia CIRP, 51–56. https://doi.org/10.1016/j.procir.2017.03.360
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 24521
Uhlmann, E., Mahnken, R., Ivanov, I. M., & Cheng, C. (2017). Thermo-Mechanical Simulation of Hard Turning with Macroscopic Models. In Lecture Notes in Production Engineering. https://doi.org/10.1007/978-3-319-57120-1_7
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27220
Schöppner, V., Lakemeyer, P., Wübbeke, A., Geißler, S., & Schmidt, M. (2017). Investigation of Residual Stress in Laser Transmission Welding of Polypropylene. 70th Annual Assembly of the International Institute of Welding (IIW). 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China).
LibreCat
2017 | Book | LibreCat-ID: 45108
Mahnken, R. (2017). Effective meso properties for fibre reinforced polymer curing.
LibreCat
| Download (ext.)
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., & Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2017 | Dissertation | LibreCat-ID: 16068
Marten, T. (2017). Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag.
LibreCat
2016 | Journal Article | LibreCat-ID: 25308
Ruediger, A. A., Bremser, W., & Strube, O. I. (2016). The enzyme-mediated autodeposition of casein: effect of enzyme immobilization on deposition of protein structures. Journal of Coatings Technology and Research, 597–611. https://doi.org/10.1007/s11998-015-9757-1
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 25309
Ruediger, A. A., Bremser, W., & Strube, O. I. (2016). Nanoscaled Biocoatings via Enzyme Mediated Autodeposition of Casein. Macromolecular Materials and Engineering, 1181–1190. https://doi.org/10.1002/mame.201600034
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 25310
Ruediger, A. A., Terborg, E., Bremser, W., & Strube, O. I. (2016). Influences on the film thickness in the enzymatic autodeposition process of casein. Progress in Organic Coatings, 56–61. https://doi.org/10.1016/j.porgcoat.2016.02.002
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 25311
Strube, O. I., Büngeler, A., & Bremser, W. (2016). Enzyme-Mediated In Situ Synthesis and Deposition of Nonaggregated Melanin Protoparticles. Macromolecular Materials and Engineering, 801–804. https://doi.org/10.1002/mame.201500315
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 27245
Schöppner, V., Westhues, K., & Westhues, T. (2016). A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27246
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). An Approach to Non-Destructive Testing of Aged Polymers. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Journal Article | LibreCat-ID: 27248
Schöppner, V., Brockhaus, S., Penner, C., & Möckel, J. (2016). Auswirkungen von Betriebsparametern in der Heißluftvulkanisation. GAK Gummi Fasern Kunststoffe, 69. Jg. Heft 7, 410–413.
LibreCat
2016 | Journal Article | LibreCat-ID: 27249
Schöppner, V., Littek, S., Döring, A., & Kuckling, D. (2016). Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung. Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 18.
LibreCat
2016 | Journal Article | LibreCat-ID: 27250
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers. Kunststoffe International, 10. Jg. Heft 4, 43–45.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27251
Moritzer, E., Nordmeyer, T., Enneking, L., Grishin, A., Knospe, A., & Buske, C. (2016). Development of an Inline Plasma Treatment During Injection Molding Process. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27252
Moritzer, E., Budde, C., & Hüttner, M. (2016). Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints. Joining in Car Body Engineering 2016. Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27253
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren. Safe and Reliable Structures. Safe and Reliable Structures, Dalheim (Deutschland).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27254
Moritzer, E., & Martin, Y. (2016). Experimental Investigations on the Fibre Length Degradation in Injection Moulds. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27255
Moritzer, E., Brockhaus, S., & Heiderich, G. (2016). Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27256
Moritzer, E., Brockhaus, S., & Heiderich, G. (2016). Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing. 16th Annual International Polymer Colloquium (IPC). 16th Annual International Polymer Colloquium (IPC), Madison (USA).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27257
Moritzer, E., & Heiderich, G. (2016). Fiber Length Reduction during Shearing in Polymer Processing. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
Schöppner, V., & Pohl, M. (2016). First Insight into the High Speed Extrusion of Polycarbonate. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Journal Article | LibreCat-ID: 27259
Moritzer, E., Kleeschulte, R., Zavoral, S., & Kaiser, E. (2016). Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie. Kunststoffe, 106. Jg. Heft 2, 54–58.
LibreCat
2016 | Journal Article | LibreCat-ID: 27260
Moritzer, E., Fecke, N., Landgräber, B., Kern, W., Kaynak, B., Grundmeier, G., & Waschke, S. (2016). In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern. Kunststoffe, 106. Jg. Heft 8, 70–72.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
Schöppner, V., & Fiebig, I. (2016). Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics. International Journal of Polymer Science, Onlineausgabe.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
Schöppner, V., & Fiebig, I. (2016). Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics. 69th Annual Assembly of the International Institute of Welding (IIW). 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
Schöppner, V., & Trippe, J. (2016). Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Journal Article | LibreCat-ID: 27264
Moritzer, E., Martin, Y., & Müller, E. (2016). Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess. Kunststofftechnik - Spritzgießen 2016, 1, 27–39.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
Schöppner, V., Westhues, K., & Westhues, T. (2016). Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
Schöppner, V., Kloke, P., & Westhues, K. (2016). Modellierung des Glasfaserlängenabbaus. PolyMerTec 2016. PolyMerTec 2016, Merseburg (Deutschland).
LibreCat
2016 | Journal Article | LibreCat-ID: 27267
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren. Kunststoffe, 106. Jg. Heft 6, 94–96.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
Schöppner, V., Hüttner, M., Henning, B., & Webersen, M. (2016). Non-Destructive Characterization of Hygrothermally Aged Polymers. 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27269
Moritzer, E., Budde, C., & Hüttner, M. (2016). Organoblechnieten. 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V. 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland).
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
Schöppner, V., Herken, T., Sporkmann, F., & Platte, F. (2016). Partikel und Schmelze im dynamischen Netz. Kunststoffe, 70–75.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
Moritzer, E., Schöppner, V., Lakemeyer, P., & Nordmeyer, T. (2016). Plasmaunterstütztes Fügen von Kunststoffen. Joining Plastics, 10. Jg. Heft 2, 100–108.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
Schöppner, V., Bagsik, A., & Knoop, F. (2016). Quality Improvement of FDM Parts by Parameter Optimization. 32nd International Conference of the Polymer Processing Society (PPS). 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich).
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
Schöppner, V., & Meilwes, P. (2016). Realitätsnah und definiert verschmutzen. Kunststoffe, 106. Jg. Heft 8, 80–84.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
Schöppner, V., & Fiebig, I. (2016). Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht. Jahresmagazin Kunststofftechnik, 120–126.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
Schöppner, V., Fiebig, I., Lakemeyer, P., Bates, P., Zazoum, B., Zak, G., & DuQuesnay, D. (2016). Several Influences during Examinations of Laser Transmission Welding - Current Status. 69th Annual Assembly of the International Institute of Welding (IIW). 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27276
Moritzer, E., Fiebig, I., Hüttner, M., Henning, B., & Webersen, M. (2016). The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers. 69th Annual Assembly of the International Institute of Welding (IIW). 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien).
LibreCat
2016 | Journal Article | LibreCat-ID: 27277
Schöppner, V., Evers, F., & Lakemeyer, P. (2016). The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials. Welding in the World, Onlineausgabe.
LibreCat
2016 | Journal Article | LibreCat-ID: 27278
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Ultraschallbasierte Charakterisierung von gealterten Polymeren. Jahresmagazin Kunststofftechnik, 98–103.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27279
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren. 18. GMA/ITG Fachtagung Sensoren Und Messsysteme. 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland).
LibreCat
2016 | Dissertation | LibreCat-ID: 27672
Meister, S. (2016). Alterung spritzgegossener thermoplastischer Mikrobauteile .
LibreCat
2016 | Dissertation | LibreCat-ID: 27673
Kothmann , M. H. (2016). Einfluss der Nanopartikelgeometrie auf ie Buchzähigkeit und das Ermüdungsrissausbreitungsverhalten von Epoxidharzen .
LibreCat
2016 | Dissertation | LibreCat-ID: 27674
Härth , M. (2016). Rheologische und verarbeitungstechnische Eigenscahften von reaktiv prozessierten Polethelnterephthalaten.
LibreCat
2016 | Dissertation | LibreCat-ID: 27675
Evers , F. (2016). Der Einfluss stoffschlüssiger Fügeverfahren auf die Verbundfestigkeit flammgeschützter Kunststoffe .
LibreCat
2016 | Dissertation | LibreCat-ID: 27676
Leßmann , S. (2016). Berechnung und Simulation von Feststoffförderprozesse in Einschneckenextrudern bis in den Hochgeschwindigkeitsbereich.
LibreCat
2016 | Dissertation | LibreCat-ID: 27677
Seidel, S. (2016). Prozessphasenoptimierte Simulation und Modellierung des Spritzgießsonderverfahrens GITBlow.
LibreCat
2016 | Dissertation | LibreCat-ID: 27682
Krugmann , J. (2016). Entwicklung und Validierung konstruktiver Merkmale bei thermoplastischen Kunststoffblindverschraubungen mit dichtendem Hinterschnitt .
LibreCat
2016 | Dissertation | LibreCat-ID: 27683
Herken , T. (2016). Verarbeitung von PET auf gleichläufigen Doppelschneckenextrudern.
LibreCat
2016 | Dissertation | LibreCat-ID: 27684
Leister , C. (2016). Ein Beitrag zur Veränderung der Kunststoffoberfläche durch Atmosphärendruck-Plasma.
LibreCat
2016 | Journal Article | LibreCat-ID: 20941
Hoppe, C., Ebbert, C., Grothe, R., Schmidt, H. C., Hordych, I., Homberg, W., … Grundmeier, G. (2016). Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation. ADVANCED ENGINEERING MATERIALS, 18(8), 1371–1380. https://doi.org/10.1002/adem.201600085
LibreCat
| DOI
| WoS
2016 | Journal Article | LibreCat-ID: 20942
Hoppe, C., Ebbert, C., Voigt, M., Schmidt, H. C., Rodman, D., Homberg, W., … Grundmeier, G. (2016). Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation. ADVANCED ENGINEERING MATERIALS, 18(6), 1066–1074. https://doi.org/10.1002/adem.201500501
LibreCat
| DOI
| WoS
2016 | Conference Paper | LibreCat-ID: 22019
Fischer, M., & Schöppner, V. (2016). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. 27th Annual International Solid Freeform Fabrication Symposium , 27, 563–568. https://doi.org/10.1007/s11837-016-2197-2
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
Moritzer, E., Hirsch, A., Günther, K., Teutoburg-Weiss, S., Lasagni, A. F., Klotzbach, U., & Sonntag, F. (2016). Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme. 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, 6, 65–70.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
Fischer, M., Seewald, O., & Schöppner, V. (2016). Chemical Surface Treatment of Ultem 9085 Parts. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 121–133. https://doi.org/10.3139/9783446450608.010
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 15962
Tröster, T., Camberg, A. A., Sanitther, B., Wang, Z., & Lauter, C. (2016). Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites, 2, 229–243. https://doi.org/10.1504/ijautoc.2016.10005304
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 15978
Tasdemirci, A., Tüzgel, F., Güzel, E., Akbulut Irmak, E. F., & Güden, M. (2016). The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments. Presented at the 11th International Conference on Advances in Experimental Mechanics, Exeter, London: The British Society for Strain Measurement.
LibreCat
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, S., & Tröster, T. (2016). Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin, (2), 23.
LibreCat
2016 | Journal Article | LibreCat-ID: 16142
Wang, Z., Riemer, M., Koch, S. F., Barfuss, D., Grützner, R., Augenthaler, F., & Schwennen, J. (2016). Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies. Advanced Materials Research, 247–254. https://doi.org/10.4028/www.scientific.net/amr.1140.247
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16144
Koch, S. F., Barfuss, D., Bobbert, M., Groß, L., Grützner, R., Riemer, M., … Wang, Z. (2016). Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches. Advanced Materials Research, 239–246. https://doi.org/10.4028/www.scientific.net/amr.1140.239
LibreCat
| DOI
2016 | Dissertation | LibreCat-ID: 16145
Reuter, C. (2016). Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen.
LibreCat
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, V., Tröster, T., & Meiners, S. (2016). Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift, 36–41. https://doi.org/10.1007/s35148-016-0090-5
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., & Tröster, T. (2016). Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. Presented at the EuroHybrid, Kaiserslautern.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, J. A., Reuter, C., Oberkönig, C., Lauter, C., & Tröster, T. (2016). Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. Presented at the Polymertec16, Merseburg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, J. A., Lauter, C., Reuter, C., & Tröster, T. (2016). Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, J. A., Reuter, C., Lauter, C., & Tröster, T. (2016). Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., Lauter, C., Löseke, J., & Tröster, T. (2016). CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. Presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal.
LibreCat
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
LibreCat
2016 | Journal Article | LibreCat-ID: 27247
Schöppner, V., Schadomsky, M., Hopmann, C., & Lemke, F. (2016). Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden. KGK Kautschuk Gummi Kunststoffe, 69. Jg. Heft 4, 30–36.
LibreCat
2016 | Dissertation | LibreCat-ID: 37567
Siewers, B. (2016). Einsatz der Widerstandserwärmung bei hydraulischen Schneidgeräten zum Trennen von hochfesten Stahlwerkstoffen in Kraftfahrzeugen: Vol. 2016,21. Shaker Verlag.
LibreCat
2016 | Journal Article | LibreCat-ID: 24644
Mahnken, R., Caylak, I., & Dridger, A. (2016). A Stochastic Finite Element Method with a Deviatoric-volumetric Split for the Stochastic Linear Isotropic Elasticity Tensor. A Stochastic Finite Element Method with a Deviatoric-Volumetric Split for the Stochastic Linear Isotropic Elasticity Tensor. https://doi.org/10.24352/UB.OVGU-2017-003
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24647
Ehlenbröker, U., Mahnken, R., Petersmann, M., & Antretter, T. (2016). Modeling of variant-interaction during bainitic phase transformation. IOP Conference Series: Materials Science and Engineering, Article 012016. https://doi.org/10.1088/1757-899x/119/1/012016
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24642
Cheng, C., & Mahnken, R. (2016). Extension of a multi-mechanism model: Hardness-based flow and transformation induced plasticity for austenitization. International Journal of Solids and Structures, 127–141. https://doi.org/10.1016/j.ijsolstr.2016.10.010
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 26269
Schneidt, A., & Mahnken, R. (2016). Macromodelling of Transformation Induced Plasticity combined with Viscoplasticity for Low-Alloy Steels. Steel Research International, 116–123. https://doi.org/10.1002/srin.200806326
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24646
Dammann, C., & Mahnken, R. (2016). Determination of effective properties for CFRP curing coupled to viscoleasticity based on a three-scale framework. PAMM, 517–518. https://doi.org/10.1002/pamm.201610247
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24645
Düsing, M., & Mahnken, R. (2016). A thermodynamic framework for coupled multiphase field and diffusion models for lower bainite transformation. PAMM, 321–322. https://doi.org/10.1002/pamm.201610149
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24643
Ju, X., & Mahnken, R. (2016). Two accuracy improvements on nonuniform transformation field analysis for plasticity coupled to softening. PAMM, 527–528. https://doi.org/10.1002/pamm.201610252
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24652
Düsing, M., & Mahnken, R. (2016). A thermodynamic framework for coupled multiphase Ginzburg-Landau/Cahn-Hilliard systems for simulation of lower bainitic transformation. Archive of Applied Mechanics, 1947–1964. https://doi.org/10.1007/s00419-016-1161-5
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24651
Mahnken, R., & Dammann, C. (2016). A three-scale framework for fibre-reinforced-polymer curing part II: Mesoscopic modeling and macroscopic effective properties. International Journal of Solids and Structures, 356–375. https://doi.org/10.1016/j.ijsolstr.2016.09.005
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 24655
Mahnken, R., & Dammann, C. (2016). A three-scale framework for fibre-reinforced-polymer curing Part I: Microscopic modeling and mesoscopic effective properties. International Journal of Solids and Structures, 341–355. https://doi.org/10.1016/j.ijsolstr.2016.09.003
LibreCat
| DOI