Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
986 Publications
2015 | Conference Paper | LibreCat-ID: 27318
Schöppner, Volker, and J. Leßmann. “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk.” 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27319
Schöppner, Volker, and J. Leßmann. “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk.” 15th Annual International Polymer Colloquium (IPC), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27320
Schöppner, Volker, et al. “Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders.” 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27321
Schöppner, Volker, et al. “Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz.” Prozessoptimierung an Compoundieranlagen, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27322
Schöppner, Volker, et al. “Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section.” 31st International Conference of the Polymer Processing Society (PPS), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27323
Hallmann, T., et al. “Systematic Determination of Parameter Influences on Wall Thickness Distribution for the New Special Injection Molding Process Direct GITBlow.” 15th Annual International Polymer Colloquium (IPC), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27324
Hallmann, T., et al. “Systematic Determination of Parameter Influences on Wall Thickness Distribution for the New Special Injection Molding Process Direct GITBlow.” 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27326
Moritzer, Elmar, et al. “Two-Stage-GITBlow - Modellbildung, Simulation Und Optimierung Der Wanddickenhomogenität.” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, 2015, pp. 69–102.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27327
Moritzer, Elmar, et al. “Wood Polymer Composites (WPC) Als Kernmaterial Im Sandwichspritzgießen.” 24. Fachtagung Technomer, 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27685
Illing , Thomas. Bewertung von Mechanischen Und Thermischen Eigenschaften Glasfaserverstärkter Polyamid-Werkstoffe Unter Besonderer Berücksichtigung Des Alterungsverhaltens von Bauteilen in Der Automobilindustrie . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27686
Kloke , Philipp. Modellierung Des Glasfaserlängenabbaus . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27688
Weddige, Robert. Analyse Und Optimierung Des Prozessverhaltens von Einschneckenextrudern Im Bereich Der Feststoffförderung Und Der Druckabhängigen Viskosität . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27689
Lakemeyer, Christoph. Temperaturberechnung Intern Innentemperierter Einschnecken. 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27690
Müller, Ellen. Ein Beitrag Zur Verfahrenstechnischen Entwicklung Der Spritzgießdirektcompoundierung Für Produktspezifische Rezepturen Glasfaserverstärkter Thermoplasten. 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27691
Librizzi, Angelo. Entwicklung von Temperatursensitiven Dünnschichten Und Untersuchungen Zu Deren Einsatz in Spritzgießwerkzeugen Der Thermoplastverarbeitung. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.” ASPE Spring Topical Meeting, 2015, pp. 26–31, doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 935–48, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 15964
Leuders, Stefan, et al. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A, 2015, pp. 3816–23, doi:10.1007/s11661-015-2864-x.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 16131
Marten, Thorsten, et al. Partial Hardening of New Press Hardenable Steels. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, Nathalie, et al. Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., et al. Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). Verlag Stahleisen GmbH, 2015, pp. 139–44.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., et al. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna. Verlag Stahleisen GmbH, 2015, pp. 127–32.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., et al. Fatigue Life Prediction for Metals Processed by Selective Laser Melting Using Finite Element Analyses. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., et al. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., et al. Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., et al. Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, Nils, and Thomas Tröster. Material Follows Form Follows Function. 2015.
LibreCat
2015 | Journal Article | LibreCat-ID: 24698
Cheng, C., and Rolf Mahnken. “A Multi-Mechanism Model for Cutting Simulations Based on the Concept of Generalized Stresses.” Computational Materials Science, 2015, pp. 144–58, doi:10.1016/j.commatsci.2014.12.028.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24699
Leismann, T., and Rolf Mahnken. “Comparison of Hyperelastic Micromorphic, Micropolar and Microstrain Continua.” International Journal of Non-Linear Mechanics, 2015, pp. 115–27, doi:10.1016/j.ijnonlinmec.2015.08.004.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 32795 | 
Mahnken, Rolf, and Christian Dammann. MESOSCOPIC MODELING OF THE RTM PROCESS FOR HOMOGENIZATION. 2015.
LibreCat
| Download (ext.)
2015 | Journal Article | LibreCat-ID: 24641
Widany, K. U., and Rolf Mahnken. “Dual-Based Adaptive FEM for Inelastic Problems with Standard FE Implementations.” International Journal for Numerical Methods in Engineering, 2015, pp. 127–54, doi:10.1002/nme.5156.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24690
Widany, Kai-Uwe, and Rolf Mahnken. “Adaptive FEM with Goal-Oriented Error Estimation and an Approximation of the Dual Problem for Inelastic Problems.” PAMM, 2015, pp. 607–08, doi:10.1002/pamm.201510293.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 19134
Dridger, Alex, et al. “Uncertainty Quantification for Linear Elastic Bodies with Two Fluctuating Input Parameters.” PAMM, 2015, pp. 551–52, doi:10.1002/pamm.201510266.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24694
Düsing, Martin, and Rolf Mahnken. “A Coupled Phase-Field - Cahn-Hilliard Model for Lower Bainitic Transformation.” PAMM, 2015, pp. 285–86, doi:10.1002/pamm.201510133.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24695
Leismann, Thorben, and Rolf Mahnken. “Transition from Hyperelastic Micromorphic to Micropolar and Microstrain Continua.” PAMM, 2015, pp. 329–30, doi:10.1002/pamm.201510155.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 19131
Caylak, Ismail, et al. “Non-Linear Stochastic Finite Element.” PAMM, 2015, pp. 179–80, doi:10.1002/pamm.201510080.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24697
Schulze, Volker, et al. “Evaluation of Different Approaches for Modeling Phase Transformations in Machining Simulation.” Production Engineering, 2015, pp. 437–49, doi:10.1007/s11740-015-0618-7.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24693
Uhlmann, Eckart, et al. “A Novel Finite Element Approach to Modeling Hard Turning in Due Consideration of the Viscoplastic Asymmetry Effect.” Procedia CIRP, 2015, pp. 471–76, doi:10.1016/j.procir.2015.03.093.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24650
Düsing, M., and Rolf Mahnken. “Simulation of Lower Bainitic Transformation with the Phase-Field Method Considering Carbide Formation.” Computational Materials Science, 2015, pp. 91–100, doi:10.1016/j.commatsci.2015.08.043.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 24696
Nörenberg, Nicole, and Rolf Mahnken. “Parameter Identification for Rubber Materials with Artificial Spatially Distributed Data.” Computational Mechanics, 2015, pp. 353–70, doi:10.1007/s00466-015-1175-9.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., et al. Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology. 2015.
LibreCat
2015 | Book Chapter | LibreCat-ID: 16134
Abel, P., et al. “Textile Composites in the Automotive Industry.” Fatigue of Textile Composites, 2015, doi:10.1016/b978-1-78242-281-5.00016-x.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, Christian, et al. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” 20th International Conference on Composite Materials, Copenhagen, 2015.
LibreCat
2015 | Journal Article | LibreCat-ID: 23906
Andreiev, Anatolii, et al. “Testing of Pipe Sections.” Materials Testing, 2015, pp. 643–48, doi:10.3139/120.110759.
LibreCat
| DOI
2014 | Newspaper Article | LibreCat-ID: 27328
Moritzer, Elmar, et al. “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics.” Welding in the World, vol. 58, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27330
Moritzer, Elmar, et al. “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27331
Schöppner, Volker, et al. “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27332
Schöppner, Volker, and S. Littek. “Berechnung Des Materialabbaus von Thermoplasten Während Des Plastifiziervorgangs.” PolyMerTec 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27333
Moritzer, Elmar, and S. Seidel. “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27334
Schöppner, Volker, and F. Reinders. “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood.” Biobased Materials 2014 - 10th Congress for Biobased Materials, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27335
Moritzer, Elmar. “Die Spritzgießsonderverfahren GITBlow, GRIPBlow Und Einstufiges GITBlow.” WAK-Symposium, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27338
Schöppner, Volker, et al. “Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27339
Moritzer, Elmar, and G. Heiderich. “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27341
Schöppner, Volker, et al. “Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen.” KGK Kautschuk Gummi Kunststoffe, vol. 67, no. 11–12, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27342
Schöppner, Volker, and N. Böhm. “Herausforderungen Bei Der Verwendung von Wood-Plastic-Composites(WPC) Im Automobilinnenbereich.” 16th Workshop Odour and Emissions of Plastic Materials, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27344
Schöppner, Volker, and B. Henke. “Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27345
Moritzer, Elmar, et al. “Im Geschlossenen Werkzeug Aufgeblasen.” Kunststoffe, vol. 104, no. 5, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27346
Schöppner, Volker, and F. Evers. “Influence of Flame Retardant Material on the Weld Strength of Plastic Parts.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27347
Moritzer, Elmar, and S. Seidel. “Influence of Process Parameters on Wall Thickness Distribution During the Initial Step of the Direct GITBlow Process.” 30th International Conference of The Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27348
Schöppner, Volker, et al. “Investigations about High-Speed Rubber Extrusion.” 11. Kautschuk-Herbst-Kolloquium (KHK), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27349
Schöppner, Volker, and S. Littek. “Measurement and Calculation of the Material Degradation of Polystyrene and Modeling of the Degradation by Using REX.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27350
Moritzer, Elmar, and J. Krugmann. “Molded-On Mechanical Fastener Ensures Uniform Force Transmission and Sealing of the Joint Surface: Joining Parts Together with the Aid of Self-Tapping Screws.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27351
Moritzer, Elmar, and R. Kleeschulte. “Nicht nur gleich und gleich gesellt sich gern.” Kunststoffe, vol. 104, no. 8, 2014, pp. 50–53.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27352
Moritzer, Elmar, and J. Krugmann. “Nutzung Der Materialdeformation Zur Entwicklung Eines Neuartigen Kunststoffblindniets.” PolyMerTec 2014, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27354
Schöppner, Volker, et al. “Optimisation of the Mixing Behaviour of Rubber Pin-Type Extruders.” 11. Kautschuk-Herbst-Kolloquium (KHK), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27355
Moritzer, Elmar, et al. “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination.” Joining Plastics, vol. 8, no. 2, 2014, pp. 100–05.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27356
Schöppner, Volker, and A. Wibbeke. “Production of Graded Structures in Films.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27357
Schöppner, Volker, and A. Wibbeke. “Stretching of Polycarbonate.” 58th Ilmenau Scientific Colloquium, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27358
Moritzer, Elmar, and C. Budde. “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27359
Moritzer, Elmar, and C. Budde. “Study of the Bond Strength of a Combination Consisting of Polypropylene Composite Sheet and Short-Fiber Thermoplastic.” Euro Hybrid Materials and Systems 2014 (EHMS), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27360
Schöppner, Volker, et al. “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials.” 67th Annual Assembly of the International Institute of Welding (IIW), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27361
Schöppner, Volker, and J. Leßmann. “Validation of Discrete Element Simulations in the Field of Solids Conveying in Single-Screw Extruders.” 30th International Conference of the Polymer Processing Society (PPS), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27362
Moritzer, Elmar, and G. Heiderich. “Vom Reststoff zum hochtechnischen Spritzgießkunststoff - Recyclingtechnologie für thermoplastische endlosfaserverstärkte Kunststoffe.” Ingenieurspiegel - Fachmagazin für Ingenieure, vol. 1, no. 3, 2014, pp. 50–52.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27363
Schöppner, Volker, et al. “WPC: Compoundierung Und Rezepturen.” WAK-Symposium, 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 27692
Wibbeke, Andrea. Entwicklung Des Herstellprozesses von Eigenverstärktem Polycarbonat Durch Monoaxiales Recken. 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 27693
Zabel, Mathias. Prozessoptimierung Und Evaluierung Der In-Situ Bildung von Nanoskaligen Cellulosefasern in SBR. 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 27694
Plugge, Thorsten. Herstellung Komplexer Polymerer Hohlkörperstrukturen. 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 27695
Hörmann, Heinrich. Theoretische Und Experimentelle Betrachtung Schnelllaufender Einschneckenextruder. 2014.
LibreCat
2014 | Dissertation | LibreCat-ID: 27696
Korsmeier, André. Untersuchung Des Instationären Verhaltens an Einem Einschneckenextruder . 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 20944
Ebbert, Christoph, et al. “Joining with Electrochemical Support (ECUF): Cold Pressure Welding of Copper.” JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol. 214, no. 10, 2014, pp. 2179–87, doi:10.1016/j.jmatprotec.2014.04.015.
LibreCat
| DOI
| WoS
2014 | Journal Article | LibreCat-ID: 20924
Ebbert, Christoph, et al. “Spectroelectrochemical and Morphological Studies of the Ageing of Silver Nanoparticles Embedded in Ultra-Thin Perfluorinated Sputter Deposited Films.” Thin Solid Films, 2014, pp. 161–67, doi:10.1016/j.tsf.2014.10.054.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22018
Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, Thomas, et al. “Functionally Graded Alloys Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014, pp. 857–61, doi:10.1002/adem.201300579.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., et al. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, pp. 15–25, doi:10.1016/j.engfracmech.2014.03.008.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., et al. Characterization of the Corrosion Influence on the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids. 2014, pp. 188–93.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M., et al. Efficient Manufacturing of Hybrid Structures Consisting of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16120
Block, Holger, et al. Crash Simulation of High Strength Automotive Components Using Advanced Failure Models. 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 16122
Lauter, Christian, et al. “Quasistatic and Crash Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International Journal of Automotive Composites, 52, 2014, doi:10.1504/ijautoc.2014.064127.
LibreCat
| DOI
2014 | Dissertation | LibreCat-ID: 16127
Lauter, Christian. Entwicklung und Herstellung von Hybridbauteilen aus Metallen und Faserverbundkunststoffen für den Leichtbau im Automobil. Vol. 4, Shaker Verlag, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16128
Block, Holger, et al. Crash Performance of the New Press Hardenable Steel 15MnB6. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, Corin, et al. Numerical Simulation of the Energy Absorption of Fiber-Reinforced Plastics. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, Nathalie, et al. Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., et al. Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue Cracks. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., et al. Evaluation of the Effect of Defects on the Mechanical Performance of Components Manufactured by Selective Laser Melting. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., et al. On the Mechanical Performance of Structures Manufactured by Selective Laser Melting: Damage Initiation and Propagation. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22030
Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–36.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured with Fused Deposition Modeling.” 29th International Conference of the Polymer Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701, doi:10.1063/1.4873874.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 24708
Widany, Kai-Uwe, and Rolf Mahnken. “Approximation of the Dual Problem for Error Estimation in Inelastic Problems.” PAMM, 2014, pp. 273–74, doi:10.1002/pamm.201410124.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 24702
Cheng, Chun, et al. “Macroscopic and Mesoscopic Modeling Based on the Concept of Generalized Stresses for Cutting Simulation.” PAMM, 2014, pp. 419–20, doi:10.1002/pamm.201410197.
LibreCat
| DOI