Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
986 Publications
2014 | Journal Article | LibreCat-ID: 24701
Dammann, C., & Mahnken, R. (2014). A macroscopic consitutive model on induced anisotropy for polymers with weighting functions. PAMM, 387–388. https://doi.org/10.1002/pamm.201410181
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 24707
Dammann, C., Caylak, I., & Mahnken, R. (2014). Experimental Investigation of PC-Films Using Optical Measurements. International Polymer Processing, 260–271. https://doi.org/10.3139/217.2848
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 28381
Heim, H.-P., Ries, A., Sch {\ "o} ppner, V., Wibbeke, A., Turek, S., Damanik, Hogenrich, Mahnken, R., Dammann, C., W {\ "u} nsch, Olaf, Al-Baldawi, A., Rohde, Bj {\" o} rn, Br {\ "u} ckner-Foit, A., Gausemeier, J. {\" u} rgen, Gr { \ "a} {\ ss} ler, Iris, & Petersen, M. (2014). Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1). Kunststoffe International}, 104, 31–35.
LibreCat
2014 | Journal Article | LibreCat-ID: 24700
Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U., & Wolff, M. (2014). Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels. International Journal of Solids and Structures, 156–171. https://doi.org/10.1016/j.ijsolstr.2014.10.021
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 24706
Dammann, C., & Mahnken, R. (2014). On the simulation of strain induced anisotropy for polymers. https://doi.org/10.1063/1.4873891
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 24703
Mahnken, R., & Nörenberg, N. (2014). Parameter identification for rubber materials with artificial higher dimensional data. PAMM, 427–428. https://doi.org/10.1002/pamm.201410201
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 24704
Ehlenbröker, U., & Mahnken, R. (2014). Bainitic variant evolution in a low-alloyed steel including numerical aspects. PAMM, 381–382. https://doi.org/10.1002/pamm.201410178
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 28379
Heim, H.-P., Ries, A., Sch {\ "o} ppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, Christian , W {\ "u} nsch, Olaf , Al-Baldawi, A., Rohde, B. {\" o} rn, Br {\ "u} ckner-Foit, A., Gausemeier, J. {\" u} rgen, Gr { \ "a} {\ ss} ler, Iris , & Petersen, M. (2014). Self-Reinforced Thermoplastic Composites - Composite Materials (Part 2). Kunststoffe International.
LibreCat
2014 | Journal Article | LibreCat-ID: 19116
Caylak, I., & Mahnken, R. (2014). Stabilized mixed triangular elements with area bubble functions at small and large deformations. Computers & Structures, 172–182. https://doi.org/10.1016/j.compstruc.2014.01.006
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. 101–108.
LibreCat
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination. Joining Plastics , 8(2), 100–105.
LibreCat
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat
| DOI
2013 | Dissertation | LibreCat-ID: 27697
Schröder , C. (2013). Verfahrenstechnische Entwicklung zum Hinterspritzen von Echtholzfurnieren mit Wood-Plastic-Composites (WPC) .
LibreCat
2013 | Dissertation | LibreCat-ID: 27698
Hallmann, T. (2013). Untersuchung des Prozessverhaltens neuartiger Einzugzonen-Konzepte für Kautschukextruder.
LibreCat
2013 | Journal Article | LibreCat-ID: 20946
Alissawi, N., Peter, T., Strunskus, T., Ebbert, C., Grundmeier, G., & Faupel, F. (2013). Plasma-polymerized HMDSO coatings to adjust the silver ion release properties of Ag/polymer nanocomposites. JOURNAL OF NANOPARTICLE RESEARCH, 15(11). https://doi.org/10.1007/s11051-013-2080-9
LibreCat
| DOI
| WoS
2013 | Conference Paper | LibreCat-ID: 22017
Fischer, M., & Schöppner, V. (2013). Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling. 24th Annual International Solid Freeform Fabrication Symposium, 24, 805–815. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013). Highly Anisotropic Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B, 794–796. https://doi.org/10.1007/s11663-013-9875-z
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 16014
Schmidt, H. C., & Lauter, C. (2013). Stahl-CFK-Strukturen wie Tiefziehteile fertigen. MaschinenMarkt Compositesworld, (3), 22–25.
LibreCat
2013 | Journal Article | LibreCat-ID: 16016
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗. Materials Testing, 537–543. https://doi.org/10.3139/120.110468
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 16017
Marten, T., Block, H., Tröster, T., Gerber, T., Sikora, S., & Lenze, F.-J. (2013). Graded Lightweight Structures Through Hot Forming. Presented at the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2013), Lulea.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, C., Hochschulz, T., Frantz, M., & Tröster, T. (2013). Influences of Automotive Process Characteristics on Hybrid Structures. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto .
LibreCat
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, B., Lauter, C., & Tröster, T. (2013). Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, T., Lauter, C., & Reuter, C. (2013). Crashworthiness of Hybrid Structures. Presented at the 4th International Conference on Integrity, Reliability and Failure (IRF2013), Funchal, Portugal.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, B., Lauter, C., & Tröster, T. (2013). Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, C., Krooß, T., & Tröster, T. (2013). Manufacturing of Hybrid Structures by Prepreg Press Technology. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, T., Lauter, C., & Reuter, C. (2013). Leichtbau mit Hybridstrukturen im Automobil. Presented at the Siegener Kolloquium “Leichtbau in Karosserie- und Fahrwerksstrukturen,” Siegen.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., Riemer, A., Niendorf, T., Richard, H. A., & Tröster, T. (2013). On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. Presented at the Materials Science & Technology, Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16025
Marten, T., Block, H., & Tröster, T. (2013). Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. Presented at the Herbstsitzung 2013 des DGM/DVM Arbeitskreises Materialermüdung, Dortmund.
LibreCat
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, C., Tröster, T., & Reuter, C. (2013). Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications. In Advanced Composite Materials for Automotive Applications. Chichester, UK. https://doi.org/10.1002/9781118535288.ch7
LibreCat
| DOI
2013 | Dissertation | LibreCat-ID: 37569
Schultz, E. (2013). Analyse und Synthese elastokinematisch optimierter Verbundlenkerachsen - Entwicklung einer Verbundlenkerachse mit entkoppeltem Radträger: Vol. 2013,3. Shaker Verlag.
LibreCat
2013 | Journal Article | LibreCat-ID: 24714
Wibbeke, A., Schöeppner, V., & Mahnken, R. (2013). Experimental Investigations on the Induced Anisotropy of Mechanical Properties in Polycarbonate Films. ISRN Materials Science, 1–8. https://doi.org/10.1155/2013/649043
LibreCat
| DOI
2013 | Book Chapter | LibreCat-ID: 24705
Mahnken, R. (2013). Parameter Identification in Continuum Mechanics: From Hand-Fitting to Stochastic Modelling. In The History of Theoretical, Material and Computational Mechanics - Mathematics Meets Mechanics and Engineering. https://doi.org/10.1007/978-3-642-39905-3_14
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 24717
Mahnken, R., Wolff, M., & Cheng, C. (2013). A multi-mechanism model for cutting simulations combining visco-plastic asymmetry and phase transformation. International Journal of Solids and Structures, 3045–3066. https://doi.org/10.1016/j.ijsolstr.2013.05.008
LibreCat
| DOI
2013 | Book Chapter | LibreCat-ID: 28784
Mahnken, R., & Stein, E. (2013). Finite Deformation Plasticity with Void Growth and Asymmetric Compression-Tension Behavior. In IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains. https://doi.org/10.1007/978-94-017-0297-3_14
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 24718
Mahnken, R. (2013). Thermodynamic consistent modeling of polymer curing coupled to visco–elasticity at large strains. International Journal of Solids and Structures, 2003–2021. https://doi.org/10.1016/j.ijsolstr.2013.01.033
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 24715
Mahnken, R. (2013). Goal-oriented adaptive refinement for phase field modeling with finite elements. International Journal for Numerical Methods in Engineering, 418–440. https://doi.org/10.1002/nme.4464
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 24709
Mahnken, R., & Dammann, C. (2013). Simulation of strain-induced anisotropy for polymers with weighting functions. Archive of Applied Mechanics, 21–41. https://doi.org/10.1007/s00419-013-0780-3
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 24712
Cheng, C., Mahnken, R., Uhlmann, E., & Ivanov, I. M. (2013). A Multi-Mechanism Model for Cutting Simulations Combining Visco-plastic Asymmetry and Phase Transformation. PAMM, 149–150. https://doi.org/10.1002/pamm.201310070
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085. 23rd Annual International Solid Freeform Fabrication Symposium, 23, 629–640. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15981
Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., & Thöne, M. (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn, 15(15/2012), 30–38.
LibreCat
2012 | Journal Article | LibreCat-ID: 15983
Lauter, C., Werneke, S., Siewers, B., & Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design, 53–58. https://doi.org/10.1365/s35725-012-0079-2
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, C., Frantz, M., Kohler, J. P., & Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, C., Sarrazin, M., & Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal.
LibreCat
2012 | Journal Article | LibreCat-ID: 15989
Ickert, L., Thomas, D., Tröster, T., & Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244, (244).
LibreCat
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, C., Siewers, B., Zanft, B., & Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto .
LibreCat
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
LibreCat
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., Leuders, S., Tröster, T., & Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit.
LibreCat
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel.
LibreCat
2012 | Report | LibreCat-ID: 16012
Tröster, T., Marten, T., Adelbert, S., & Kadim, A. (2012). P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH.
LibreCat
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. 1st International Conference on Thermo-Mechanically Graded Materials, 1, 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. 5th International Conference on Polymer and Mould Innovations, 5, 266–272. https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, H. C., Damerow, U., Lauter, C., Gorny, B., Hankeln, F., Homberg, W., Tröster, T., Maier, H. J., & Mahnken, R. (2012). Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements. Key Engineering Materials, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Hankeln, F., Lauter, C., Schmidt, H. C., Damerow, U., Mahnken, R., Maier, H. J., Tröster, T., & Homberg, W. (2012). Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs. 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Journal Article | LibreCat-ID: 16010
Lauter, C., Tröster, T., Brandis, R., & Gausemeier, J. (2012). Methodik für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design, 5, 50–56. https://doi.org/10.1365/s35725-013-0137-4
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 20947
Maxisch, M., Ebbert, C., Torun, B., Fink, N., de los Arcos, T., Lackmann, J., … Grundmeier, G. (2011). PM-IRRAS studies of the adsorption and stability of organophosphonate monolayers on passivated NiTi surfaces. APPLIED SURFACE SCIENCE, 257(6), 2011–2018. https://doi.org/10.1016/j.apsusc.2010.09.044
LibreCat
| DOI
| WoS
2011 | Journal Article | LibreCat-ID: 15969
Lauter, C., Sarrazin, M., & Tröster, T. (2011). Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten, 3/2011, 39–43.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, M., Stübbe, O., Lauter, C., Schrange, J., & Tröster, T. (2011). Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., Block, H., Tröster, T., & Krogmeier, J. (2011). Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Journal Article | LibreCat-ID: 15974
Marten, T., Lauter, C., & Tröster, T. (2011). Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel, 2/2011, 67–69.
LibreCat
2011 | Journal Article | LibreCat-ID: 15975
Lauter, C., Thomas, D., Frantz, M., Niewel, J., & Tröster, T. (2011). Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, 2, 6–7.
LibreCat
2011 | Journal Article | LibreCat-ID: 15980
Lauter, C., Frantz, M., Siewers, B., & Tröster, T. (2011). Hybrid structures for tailored structural automotive components. JEC Composites Magazine, 69, 35–37.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., Block, H., & Tröster, T. (2011). Production of load-adapted lightweight designs by partial hardening. Presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg.
LibreCat
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Tröster, T., & Maier, H. J. (2011). In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A, 528(27), 7962–7967. https://doi.org/10.1016/j.msea.2011.07.026
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 15993
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design, 4, 48–54.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, M., Lauter, C., & Tröster, T. (2011). Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. Presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau.
LibreCat
2011 | Journal Article | LibreCat-ID: 15997
Lauter, C., Frantz, M., Marten, T., Tröster, T., Bach, G., & Seliger, G. (2011). Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (09/2011).
LibreCat
2011 | Journal Article | LibreCat-ID: 15998
Frantz, M., Lauter, C., & Tröster, T. (2011). Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (10/2011).
LibreCat
2011 | Conference Paper | LibreCat-ID: 15999
Marten, T., Tröster, T., Adelbert, S., & Kadim, A. (2011). Fluidized bed heating of blanks for the hot forming process. Presented at the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2011), Kassel.
LibreCat
2011 | Conference Paper | LibreCat-ID: 16002
Tröster, T., & Lauter, C. (2011). Hybridstrukturen für den automobilen Leichtbau. Presented at the 3. Forum zum Thema “Multi Material Design (MMD) für Leichtbauanwendungen,” Landshut.
LibreCat
2011 | Journal Article | LibreCat-ID: 16013
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design, 4, 48–54. https://doi.org/10.1365/s35725-011-0044-5
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 16000
Marten, T., Niewel, J., & Tröster, T. (2011). Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials, 309–315. https://doi.org/10.3139/105.110119
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, C., Damerow, U., Frantz, M., Tröster, T., & Homberg, W. (2011). Produktionsverfahren zur Herstellung höchstfester hybrider Leichtbaustrukturen für den Einsatz im Automobil. InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, C., Dau, J., Tröster, T., & Homberg, W. (2011). Manufacturing processes for automotive structures in multi-material design consisting of sheet metal and CFRP prepregs. 16th International Conference on Composite Structures (ICCS16), Porto, Portugal.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15995
Lauter, C., Sköck-Hartmann, B., Gries, T., Tröster, T., & Linke, M. (2011). Multi-material systems. High strength steels and fiber-reinforced plastics. 6th European Conference on Steel and Composite Structures (Eurosteel 2011), Budapest.
LibreCat
2011 | Conference Paper | LibreCat-ID: 16003
Kochanek, C., Siewers, B., Frantz, M., Glowania, M., Linke, M., Lauter, C., Gries, T., & Tröster, T. (2011). Hybrid FRP-Steel components for automotive applications. 5. Aachen-Dresden International Textile Conference, Aachen.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Lauter, C., Damerow, U., Homberg, W., & Tröster, T. (2011). Multi-material systems for tailored automotive structural components. 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea.
LibreCat
2010 | Journal Article | LibreCat-ID: 15956
Lauter, C., Tröster, T., Sköck-Hartmann, B., Gries, T., & Linke, M. (2010). Höchstfeste Multimaterialsysteme aus Stahl und Faserverbundkunststoffen. VDI Konstruktion: Ingenieur-Werkstoffe, 11-12/2010, IW 8-9.
LibreCat
2009 | Journal Article | LibreCat-ID: 15953
Böke, J., Erhardt, R., Rostek, W., & Tröster, T. (2009). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*. Materials Testing, 22–27. https://doi.org/10.3139/120.110002
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 15954
Tröster, T., Howe, C., Müller, M., & Rostek, W. (2008). Development status and market potential of hot formed ballistic steels. Presented at the Steels in Cars and Trucks, Wiesbaden.
LibreCat
2008 | Journal Article | LibreCat-ID: 15955
Niendorf, T., Marten, T., Maier, H. J., & Karaman, I. (2008). The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel. Materials Science Forum, 584–586, 864–869. https://doi.org/10.4028/www.scientific.net/msf.584-586.864
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 33878
Tröster, T., Rostek, W., Böke, J., & Erhardt, R. (2008). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In DVM (Ed.), Ein wesentlicher Beitrag zur Klimadebatte (Vol. 675).
LibreCat
2007 | Book | LibreCat-ID: 33880
Tröster, T., & Berg, J. (2007). Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle (Vol. P727). Verlag- und Vertriebsgesellschaft Düsseldorf.
LibreCat
2004 | Conference Paper | LibreCat-ID: 33881
Tröster, T., & Rostek, W. (2004). Innovative Warmumformung. In T. Tröster & W. Rostek (Eds.), Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach (Issue 2004, pp. 51–66).
LibreCat