Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2019 | Journal Article | LibreCat-ID: 25754
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einschneckenextruder,” WAK Jahresmagazin, pp. 64–67, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25755
E. Moritzer and M. Wittke, “Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25756
E. Moritzer, S. Kartelmeyer, B. Hüttemann, and C. Jaroschek, “Spritzgießwerkzeuge mit Heatpipe-Temperierung,” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25757
E. Moritzer, J. Jilg, and N. Sibbe, “Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse,” PU MAGAZIN, pp. 220–224, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25759
V. Schöppner and K. Westhues, “Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25760
E. Moritzer and J. Jilg, “Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC),” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 27648
M. Pohl, High-Speed-Extrusion amorpher Polymere am Beispiel von Polycarbonat (PC) und Polymethylmethacrylat (PMMA). 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 27649
P. Meilwes , Simulation und Modellierung des Druckverlustes industrieller Polymerschmelzefilter in Abhängigkeit verschiedener Prozessbedingungen sowie deren verschmutzung . 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 27653
B. Landgräber, Experimentelle und modellbasierte Analyse der Prozessphasen des Spritzgießsonderverfahrens GITBlow . 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 27654
I. Fiebig, Beitrag zur Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht faserverstärkter Thermoplaste . 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 27655
T. Nordmeyer, Verfahrenstechnische Entwicklung des Direktinjektion-Plasmaverfahrens im Spritzgießprozess . 2019.
LibreCat
2019 | Newspaper Article | LibreCat-ID: 23845
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Advancing into New Dimensions,” Kunststoffe internationl, vol. 109, no. 2, pp. 48–52, 2019.
LibreCat
| PubMed | Europe PMC
2019 | Newspaper Article | LibreCat-ID: 23850
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Vorstoß in neue Dimensionen,” Kunststoffe, vol. 109, no. 2, pp. 68–72, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 23866
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einzug von Einschneckenextrudern,” WAK Jahresmagazin, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 23879
M. Albrecht, M. Gehde, M. Bialaschik, and V. Schöppner, “Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen,” presented at the Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Dissertation | LibreCat-ID: 37602
A. Gehring, Untersuchungen zum energetischen Verhalten von Kunststoffverarbeitungsprozessen auch im Rahmen von Energiemanagementsystemen. 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 37619
K. J. Westhues, Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern. 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25619
V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).,” Polymers, pp. 1488–1515, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 44308
H. Bayazian, V. Schöppner, A. Yadegari , and H. Haddad , “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS , Türkei , 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25641
V. Schöppner et al., “Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie,” presented at the Werkstoffwoche (2019), Dresden (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 25513
D. Stüker, V. Schöppner, K. Putzig, and U. Giese, “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity,” presented at the Deutsche Kautschuk Tagung, Nürnberg, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 25515
D. Stüker and V. Schöppner, “Influence of Different Temperature Control Unit (TCU) Settings on Thermal Homogeneity and Throughput in Rubber Extrusion Processes,” presented at the International Rubber Conference (IRC), Kuala Lumpur, 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 24527
M. Hopp, Verfahrenstechnische Entwicklung zum Kleben von WPC für Anwendungsgebiete aus dem Holz-/Kunststoffbereich. Aachen: Shaker Verlag, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 25784
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26929
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26934
V. Schöppner, F. Sporkmann, and J. Markarian, “Building the Perfect Model,” Compounding World, no. Onlineausgabe März, pp. 31–40, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26935
V. Schöppner and P. Meilwes, “CAD-Datenerzeugung zur Druckverlustsimulation von Filtermedien,” Konstruktion, vol. 70. Jg. Heft 11, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26937
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26938
E. Moritzer, A. Hirsch, and S. Paulus, “Dauerschwinguntersuchungen an FDM-Verstärkungsstrukturen,” presented at the 3. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26939
E. Moritzer, J. Jilg, Y. Martin, and E. Müller, “Die effiziente Materialentwicklung mittels Spritzgießdirektcompoundierung (SGDC),” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 14. Jg. Heft 1, pp. 1–34, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26940
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzone gleichläufiger Doppelschneckenextruder,” presented at the VDI Wissensforum, Leverkusen (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26941
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” Welding in the World, vol. 62. Jg. Heft 3, pp. 601–608, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26942
E. Moritzer and T. Nordmeyer, “Einfluss der Oberflächenaktivierung mittels der Direktinjektion- und der Atmosphärendruck-Plasmabehandlung für das Kleben von Kunststoffen,” Joining Plastics, vol. 12. Jg. Heft 2, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26944
V. Schöppner, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, and M. Razavi-Nouri, “Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26945
V. Schöppner and I. Fiebig, “Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding,” presented at the 71st Annual Assembly of the International Institute of Welding (IIW), Bali (Indonesien), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26946
E. Moritzer et al., “Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising During Vacuum Castin Processes,” Polymer-Plastics Technology and Engineering, vol. 57. Jg. Heft 15, pp. 1524–1529, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26947
V. Schöppner and J. Fiebig, “Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62. Jg., no. Heft 5, pp. 997–1012, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26948
E. Moritzer, J. Jilg, A. Neunhäuserer, and W. Friesenbichler, “Glasfaseragglomerate im Visier - eine Zerreißprobe,” Kunststoffe, vol. 108. Jg., no. Heft 7, pp. 48–52, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26949
E. Moritzer and B. Landgräber, “Inflation Behavior of Preforms in the Special Injection Molding Process GITBlow Combining Gas Assisted Injection Molding and Blow Molding,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26950
V. Schöppner and I. Fiebig, “Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62, no. 6, pp. 1301–1309, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26951
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, and S. S. Asad, “Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen,” presented at the 17. EWIKON Heißkanal-Forum, Frankenberg (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26952
V. Schöppner and H. Bayazian, “Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26953
E. Moritzer and G. Heiderich, “Investigation on the Fiber Compounding with a New Type of Compounding Machine,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26955
V. Schöppner, C. Schumacher, and C. Fels, “Materialentwicklung für FLM,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26956
V. Schöppner, C. Schumacher, and C. Fels, “Materialschwindung und Verzug im FDM-Prozess,” presented at the DVM Tagung - Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26957
V. Schöppner and J. Trippe, “Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds,” International Polymer Processing, vol. 33, no. 4, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26958
V. Schöppner and J. Trippe, “Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26959
V. Schöppner and P. Meilwes, “Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26960
V. Schöppner, H. Bayazian, M. Hopp, and A. Yadegari, “Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26961
E. Moritzer, C. Budde, and D. Krassmann, “Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26962
V. Schöppner and F. Sporkmann, “New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26963
E. Moritzer, G. Heiderich, and M. Wittke, “Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26964
V. Schöppner, C. Schumacher, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” presented at the 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, Austin (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26965
V. Schöppner and J. Walter, “Scale-Up of Garvey-Die Test Setup,” presented at the 13. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26966
V. Schöppner and J. Walter, “Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26967
V. Schöppner and I. Fiebig, “Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente,” Joining Plastics, vol. 12, no. 2, pp. 87–93, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26968
V. Schöppner and V. Resonnek, “Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26969
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26970
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26971
E. Moritzer and M. Wittke, “Synergies from the Screw,” Kunststoffe International, no. 12/2018, pp. 34–37, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26972
E. Moritzer and M. Wittke, “Syngerien aus der Schnecke,” Kunststoffe, no. 12/2018, pp. 69–72, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26974
E. Moritzer and T. Nordmeyer, “System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes,” presented at the Joining in Car Body Engineering 2018, Bad Nauheim (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26975
E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26977
E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Book Chapter | LibreCat-ID: 26979
E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen,” in Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
2018 | Dissertation | LibreCat-ID: 27658
P. R. Brandler , Failure behavior of short glass fiber reinforced polyamide under superimposed mechanical-enviromental fatigue. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 27659
F. Reinders , Analyse und Modellierung des Reckverfahrens von mono- und biaxial verstreckten Polypropylenfolien. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 27660
J.-C. Zarges, Charakterisierung des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 27662
P. A. Nikoleizig , Inverse thermische Spritzgießwerkzeugauslegung auf Basis des lokalen Kühlbedarfs . 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 26954
V. Schöppner, M. Schadomsky, and D. Stüker, “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 37592
P. Lakemeyer, Entwicklung und Analyse neuartiger Verfahrensvarianten zum quasisimultanen Laser-durchstrahlschweißen unter Berücksichtigung der Temperaturentwicklung. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 37593
J. K. Trippe, Erweiterung der Modellierung zur Durchsatz- und Leistungsberechnung von Feststoffförderprozessen in der Einschneckenextrusion. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 37595
M. Wilhelm, Verfahrensentwicklung zur Einarbeitung nanoskaliger Suspensionen in Polyethylenterephthalat. 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26932
V. Schöppner, P. Lakemeyer, B. Geißler, T. Laumer, A. Wübbeke, and T. Frick, “Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths,” Journal of Laser Applications, vol. 30. Jg., 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26933
V. Schöppner, A. Wübbeke, B. Geißler, T. Laumer, T. Frick, and M. Schmidt, “Analysis of the weld seam morphology of polypropylene in laser transmission welding,” Manuf. Sci. Eng, p. 140(11), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
2017 | Conference Paper | LibreCat-ID: 25578
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 24523
E. Moritzer and M. Hopp, “Bonding of wood-plastic composites (WPC)—material and surface modification for special applications,” Welding in the World, pp. 1029–1038, 2017, doi: 10.1007/s40194-017-0487-0.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 24529
E. Moritzer and M. Hopp, “Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes,” 2017.
LibreCat
2017 | Conference (Editor) | LibreCat-ID: 25739
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27200
E. Moritzer and T. Westhues, “Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27202
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, p. S. 108-114, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27203
E. Moritzer and B. Landgräber, “Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27204
E. Moritzer, C. Budde, and M. Hüttner, “Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27205
V. Schöppner, H. Bayazian, F. Reinders, and C. Goebel, “Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27206
E. Moritzer and T. Nordmeyer, “Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths,” presented at the 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27207
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder,” presented at the 43. Deutsche Compoundiertagung, Nürnberg (Deutschland), 2017.
LibreCat