Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2021 | Conference Paper | LibreCat-ID: 24096 | 
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat
| DOI
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24771
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, vol. 18. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24773
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, vol. 17. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Newspaper Article | LibreCat-ID: 24133
V. Schöppner, L. Austermeier, and K. Dietl, “Der richtige Dreh für Simulationen,” Blasformen & Extrusionswerkzeuge, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
V. Schöppner, L. Austermeier, and K. Dietl, “SKZ simuliert Doppelschnecke,” K Zeitung, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24183
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, and J. Mirasol, “Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent,” JOURNAL OF INDUSTRIAL TEXTILES, no. 50, pp. 224–239, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24184
E. Moritzer, F. M. Mühlhoff, E. Krampe, and E. Lochbaum, “2K-Haftverbunde aus originär inkompatiblen Kunststoffen,” Plastverarbeiter, no. 07/20, pp. 20–23, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24201
E. Moritzer, S. Kartelmeyer, and V. Hüttemann, “Additive Manufactured Heat Pipe Injection Mould Element,” presented at the Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24203
E. Moritzer and J. Hillemeyer, “Additiveteile Direktverschrauben,” presented at the 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg, 2020.
LibreCat
2020 | Misc | LibreCat-ID: 24204
V. Schöppner, M. Dörner, and C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION. 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24206
E. Moritzer and J. Hillemeyer, “Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben,” presented at the 10. Gemeinschaftskolloquium, WebKolloquium (Deutschland), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion),” Polymers, no. 12(9), p. 1900, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24213
E. Moritzer and M. Wittke, “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24228
E. Moritzer and D. Krassmann, “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
V. Schöppner, M. Dörner, C. Marschik, and G. Steinbichler, “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws,” Polymers, p. 946, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24232
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, and W. Friesenbichler, “Die Kunst der Entformung,” Kunststoffe, pp. 60–63, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24233
E. Moritzer, M. Hopp, and M. Wittke, “EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG,” WAK Jahreszeitschrift, pp. 2–5, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24234
E. Moritzer and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” Joining Plastics, pp. 96–103, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24235
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24237
E. Moritzer, S. Kartelmeyer, M. Hüttemann, and C. Jaroschek, “INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT,” presented at the 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24238
E. Moritzer and F. M. Mühlhoff, “Inline Surface Activation in the multi Injection Molding Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24239
E. Moritzer, F. M. Mühlhoff, E. Lochbaum, and E. Krampe, “InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen,” KGK - Rubberpoint, pp. 22–26, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24242
E. Moritzer, A. Hirsch, and C. Dalmer, “Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability,” in Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
2020 | Journal Article | LibreCat-ID: 24246
E. Moritzer, F. M. Mühlhoff, and E. Krampe, “Kostensenkung beim Mehrkomponenten-Spritzgießen,” Kunststoff + Verarbeitung, no. 5, pp. 92–93, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24248
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Mehr Materialkombinationen, weniger Kosten,” Kunststoffe, pp. 39–42, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24249
E. Moritzer and M. Wittke, “Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite,” MNWP Magazin, pp. 26–27, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24250
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “More Material Combinations, Lower Costs,” Kunststoffe international, pp. 22–25, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24251
E. Moritzer and D. Krassmann, “Neuartige Fügetechnik für Organoblech-Hybridverbindungen,” presented at the DVS Congress 2020, Online, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24252
E. Moritzer and M. Wittke, “Neue Maßstäbe in puncto Festigkeit und Faserlänge,” Plastverarbeiter, pp. 18–21, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24253
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma technology rationalizes 2-component processes,” adhesion ADHESIVES + SEALANTS, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24256
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma-Technologie zur Rationalisierung von 2K-Prozessen,” adhäsion KLEBEN & DICHTEN, no. 10, pp. 16–19, 2020.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 24259
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24260
E. Moritzer and C. Schumacher, “Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting,” presented at the 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
S. Vogtschmidt, I. Fiebig, and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24317
H. Malatyali, V. Schöppner, A. Behrendt, T. Hoemann, F. Sporkmann, and F. Hanselle, “Differences between the recycled carbon fibers especially regarding the product quality, ,” 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
S. Vogtschmidt and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” in DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020, vol. 365.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” Welding in the World, vol. 64, pp. 1843–1853, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
T. Arndt and V. Schöppner, “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten,” Joining Plastics, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
T. Arndt and V. Schöppner, “Wenn Regeln Potenziale freisetzen,” K-Zeitung, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
T. Arndt and V. Schöppner, “Quasi-Simultaneous Laser Transmission Welding,” PhotonicsViews, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
V. Schöppner and M. Bialaschik, “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides,” presented at the 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25768
E. Moritzer and D. Krassmann, Eds., Neuartige Fügetechnik für Organoblech-Hybridverbindungen. 2020.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25779
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 27642
M. Hüttner , Einfluss umgebungsbedingter Alterung auf das Werkstoffverhalten unverstärkter, kurzfaserverstärkter und gewebeverstärkter Thermoplaste . 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 27643
G. Heiderich, Modellbasierte Beschreibung und Validierung der Glasfaserverkürzung im Spritzgießplastifizieraggregat mittels analytischer und und diskreter Ansätze . 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 27644
H. Bayazian, Evaluation of LLDPE and PLA Films Manufactured with High Speed. 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 27645
F. Sporkmann, Modellierung der Materialströmung auf gleichläufigen Doppelschneckenextrudern mit Hilfe der Performance Mapping Methode. 2020.
LibreCat
2020 | Dissertation | LibreCat-ID: 27646
V. Resonnek, Entwicklung einer Zylindertemperatureinstellungsregelung auf Basis von Fuzzy-Logik . 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
M. Altepeter and V. Schöppner, “Materialabbau im Doppelschneckenextruder,” Kunststoffe, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
V. Schöppner and F. Brüning, “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations,” in Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden,” DVS CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Hot gas welding – Influences of the tool design,” presented at the PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria, 2020, doi: 10.1063/5.0029478.
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24479
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization,” in Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 42892
A. Wübbeke et al., “Long- and Short-Term Tensile Strength and Morphology of Joined Beta-Nucleated Polypropylene Parts,” 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24245
V. Schöppner et al., “Investigation of residual stresses of hot plate welding,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Marina Bay (Singapore), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
V. Schöppner et al., “Selected Aspects for the Assessment of Laser Transmission Welding,” Joining Plastics, pp. 30–35, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
V. Schöppner et al., “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS,” presented at the ANTEC20, Texas (USA), 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24247
E. Moritzer and J. Hillemeyer, “Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process,” presented at the 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25517
D. Stüker and V. Schöppner, “Einfluss unterschiedlicher Temperatureinstellungen und Schneckengeometrien auf die thermische Homogenität und das Prozessverhalten von schnelllaufenden Kautschukextrudern,” presented at the 26. Fachtagungüber Verarbeitung und Anwendung von Polymeren (Technomer), Chemnitz, 2019.
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25580
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25582
E. Moritzer and D. Krassmann, “Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25583
E. Moritzer and D. Krassmann, Eds., Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25608
E. Moritzer et al., “New Polymers for Needleless Electrospinning from Low-Toxic Solvents,” NANOMATERIALS, no. 9, Art. no. 52, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25610
E. Moritzer et al., “Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation,” POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, no. 58, pp. 1937–1943, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25611
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, and F. Woitschek, “Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere,” in 45. Deutsche Jahrestagung für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25613
E. Moritzer and T. Westhues, “Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen,” in 26. Fachtagung über die Verarbeitung und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
V. Schöppner and F. Sporkmann, “Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25621
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
V. Schöppner and M. Dörner, “COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
V. Schöppner and V. Resonnek, “DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25624
E. Moritzer and J. Jilg, “Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC),” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25626
E. Moritzer and J. Hillemeyer, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25627
V. Schöppner and K. Westhues, Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1,” GAK-Gummi Fasern Kunststoffe, p. S. 152-159, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2,” GAK Gummi Faser Kunststoffe, pp. 206–213, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25630
E. Moritzer and J. Hillemeyer, “Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25631
E. Moritzer and J. Hillemeyer, “Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet,” Joining Plastics, pp. 40–46, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
V. Schöppner and V. Resonnek, “Extruder optimier dich!,” Kunstsstoffe, pp. 56–61, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
V. Schöppner, “Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess,” presented at the VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25635
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, and A. Ehrmann, “Improved abrasion resistance of textile fabrics due to polymer coatings,” JOURNAL OF INDUSTRIAL TEXTILES, no. 49, pp. 572–583, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25636
E. Moritzer, D. Netzband, and A. Ujma, “Influences on structural intensity for injection mouldet thermoplastic parts,” presented at the 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25637
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen,” Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik, pp. 54–59, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24319
H. Malatyali and V. Schöppner, “Untersuchung des Dosierverhaltens von Carbonfaserrezyklaten für den Einsatz im gleichläufigen Doppel-schneckenextruder,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” presented at the 72nd Assembly of the International Institute of Welding (IIW), Bratislava, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25638
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “InMould-Plasma,” presented at the Eröffnung Plasma-Campus bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25639
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” PU MAGAZIN - International, pp. 320–324, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25640
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” TPE Magazine international, no. 4, pp. 230–234, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25689
E. Moritzer, M. Hüttner, D. Krassmann, and M. Wittke, “Lebensdauer von Composites und Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
V. Schöppner, H. Bayazian, and A. Yadegari, “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
V. Schöppner, F. Sporkmann, and A. Heide, “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25738
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25745
E. Moritzer and A. Hirsch, “Oberflächennachbearbeitung und Kleben von FDM-Bauteilen,” presented at the DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
V. Schöppner, H. Bayazian, A. Yadegari, and H. Haddad, “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25747
E. Moritzer and T. Westhues, “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25748
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, pp. 867–873, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
V. Schöppner and F. Sporkmann, “Scale up von Doppelschneckenmaschinen,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25751
V. Schöppner, P. Meilwes, and K. Westhues, Schmelzefilter. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
V. Schöppner and F. Sporkmann, “Simulation aids compounding success,” Compounding World, pp. 47–56, 2019.
LibreCat