Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2016 | Conference Paper | LibreCat-ID: 27252
E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27253
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27254
E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length Degradation in Injection Moulds,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27255
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27256
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27257
E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer Processing,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
V. Schöppner and M. Pohl, “First Insight into the High Speed Extrusion of Polycarbonate,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27259
E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft 2, pp. 54–58, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27260
E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,” Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
V. Schöppner and I. Fiebig, “Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics,” International Journal of Polymer Science, no. Onlineausgabe, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
V. Schöppner and I. Fiebig, “Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
V. Schöppner and J. Trippe, “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27264
E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess,” Kunststofftechnik - Spritzgießen 2016, no. 1, pp. 27–39, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
V. Schöppner, K. Westhues, and T. Westhues, “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
V. Schöppner, P. Kloke, and K. Westhues, “Modellierung des Glasfaserlängenabbaus,” presented at the PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27267
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren,” Kunststoffe, no. 106. Jg. Heft 6, pp. 94–96, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
V. Schöppner, M. Hüttner, B. Henning, and M. Webersen, “Non-Destructive Characterization of Hygrothermally Aged Polymers,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27269
E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
V. Schöppner, T. Herken, F. Sporkmann, and F. Platte, “Partikel und Schmelze im dynamischen Netz,” Kunststoffe, pp. 70–75, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
V. Schöppner, A. Bagsik, and F. Knoop, “Quality Improvement of FDM Parts by Parameter Optimization,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
V. Schöppner and P. Meilwes, “Realitätsnah und definiert verschmutzen,” Kunststoffe, no. 106. Jg. Heft 8, pp. 80–84, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
V. Schöppner and I. Fiebig, “Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht,” Jahresmagazin Kunststofftechnik, pp. 120–126, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
V. Schöppner et al., “Several Influences during Examinations of Laser Transmission Welding - Current Status,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27276
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, and M. Webersen, “The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27277
V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” Welding in the World, no. Onlineausgabe, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27278
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ultraschallbasierte Charakterisierung von gealterten Polymeren,” Jahresmagazin Kunststofftechnik, pp. 98–103, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27279
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren,” presented at the 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27672
S. Meister, Alterung spritzgegossener thermoplastischer Mikrobauteile . 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27673
M. H. Kothmann , Einfluss der Nanopartikelgeometrie auf ie Buchzähigkeit und das Ermüdungsrissausbreitungsverhalten von Epoxidharzen . 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27674
M. Härth , Rheologische und verarbeitungstechnische Eigenscahften von reaktiv prozessierten Polethelnterephthalaten. 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27675
F. Evers , Der Einfluss stoffschlüssiger Fügeverfahren auf die Verbundfestigkeit flammgeschützter Kunststoffe . 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27676
S. Leßmann , Berechnung und Simulation von Feststoffförderprozesse in Einschneckenextrudern bis in den Hochgeschwindigkeitsbereich. 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27677
S. Seidel, Prozessphasenoptimierte Simulation und Modellierung des Spritzgießsonderverfahrens GITBlow. 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27682
J. Krugmann , Entwicklung und Validierung konstruktiver Merkmale bei thermoplastischen Kunststoffblindverschraubungen mit dichtendem Hinterschnitt . 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27683
T. Herken , Verarbeitung von PET auf gleichläufigen Doppelschneckenextrudern. 2016.
LibreCat
2016 | Dissertation | LibreCat-ID: 27684
C. Leister , Ein Beitrag zur Veränderung der Kunststoffoberfläche durch Atmosphärendruck-Plasma. 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 27247
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden,” KGK Kautschuk Gummi Kunststoffe, no. 69. Jg. Heft 4, pp. 30–36, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 24530
E. Moritzer and M. Hopp, “Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications,” 2015.
LibreCat
2015 | Journal Article | LibreCat-ID: 24531
E. Moritzer and M. Hopp, “Kleben von Wood-Plastic-Composites (WPC) - Material- und Oberflächenmodifizierung für spezielle Anwendungen,” Jahresmagazin Kunststofftechnik, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27292
E. Moritzer, C. Budde, and M. Hüttner, “Wie Kurz- und Endlosfasern sich am besten vertragen,” Kunststoffe, vol. 105, no. 3, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27295
E. Moritzer, C. Leister, and T. Nordmeyer, “Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma,” Zeitschrift Kunststofftechnik, vol. 11, no. 4, pp. 205–226, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27296
V. Schöppner, N. Fecke, and T. Herken, “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern,” Jahresmagazin Kunststofftechnik, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27297
E. Moritzer, R. Kleeschulte, S. Pollmann, and K. Anger, “Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time,” presented at the Europe-Africa Conference of the Polymer Processing Society, Graz (Österreich), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27300
V. Schöppner, F. Reinders, W. Bremser, and E. Sabanov, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27301
V. Schöppner and J. Leßmann, “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27302
S. Brockhaus and T. Hallmann, “Effects of Barrel and Screw Heating in Rubber Extrusion,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27303
V. Schöppner and S. Brockhaus, “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion,” GAK Gummi Fasern Kunststoffe, vol. 68, no. 7, pp. 470–474, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27304
E. Moritzer and C. Budde, “Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27305
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds,” KGK Kautschuk Gummi Kunststoffe, vol. 68, no. 7–8, pp. 46–58, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27306
V. Schöppner, T. Herken, and M. Hüttner, “Influence of the Screw Clearances on the Pressure Build-Up,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27307
E. Moritzer and Y. Martin, “Innovative Use of Wood-Plastic-Composites (WPC) as a Core Material in the Sandwich Injection Molding Process,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27308
V. Schöppner, M. Schadomsky, and C. Hopmann, “Investigations of the Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27309
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, and A. Knospe, “Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet,” presented at the 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27310
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the GNS8 - International Conference on Thermoplastics Joining, Genua (Italien), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27311
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27312
E. Moritzer and C. Budde, “Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers,” presented at the DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27313
E. Moritzer and G. Heiderich, “Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27314
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Deutsche Kautschuk-Tagung (DKT 2015), Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27315
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Science meets Tires, Aachen (Deutschland), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27316
S. Brockhaus and T. Hallmann, “Möglichkeiten und Grenzen schnelllaufender Kautschukextruder,” KGK Kautschuk Gummi Kunststoffe, vol. 68, no. 10, pp. 39–45, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27317
E. Moritzer and S. Seidel, “Numerical Analysis and Evaluation of Process and Geometry Specific Transient Temperature Fields for a New Variation of Gas-Assisted Injection Molding,” International Polymer Processing, vol. 30, no. 2, pp. 265–275, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27318
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27319
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27320
V. Schöppner, T. Herken, M. Pohl, and K. Westhues, “Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27321
V. Schöppner, T. Herken, and M. Hüttner, “Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz,” Prozessoptimierung an Compoundieranlagen, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27322
V. Schöppner, B. Henke, and F. Reinders, “Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27323
T. Hallmann, B. Landgräber, and S. Seidel, “Systematic Determination of Parameter Influences on Wall Thickness Distribution for the New Special Injection Molding Process Direct GITBlow,” presented at the 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27324
T. Hallmann, B. Landgräber, and S. Seidel, “Systematic Determination of Parameter Influences on Wall Thickness Distribution for the New Special Injection Molding Process Direct GITBlow,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27325
V. Schöppner and P. Lakemeyer, “Transferbility of Investigation Results for Laser Transmission Welding,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27326
E. Moritzer, J. Leßmann, T. Plugge, and S. Seidel, “Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, pp. 69–102, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27327
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, and M. Bastian, “Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen,” presented at the 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27329
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27685
T. Illing , Bewertung von mechanischen und thermischen Eigenschaften glasfaserverstärkter Polyamid-Werkstoffe unter besonderer Berücksichtigung des Alterungsverhaltens von Bauteilen in der Automobilindustrie . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27686
P. Kloke , Modellierung des Glasfaserlängenabbaus . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27688
R. Weddige, Analyse und Optimierung des Prozessverhaltens von Einschneckenextrudern im Bereich der Feststoffförderung und der druckabhängigen Viskosität . 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27689
C. Lakemeyer, Temperaturberechnung intern innentemperierter Einschnecken. 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27690
E. Müller, Ein Beitrag zur verfahrenstechnischen Entwicklung der Spritzgießdirektcompoundierung für produktspezifische Rezepturen glasfaserverstärkter Thermoplasten. 2015.
LibreCat
2015 | Dissertation | LibreCat-ID: 27691
A. Librizzi, Entwicklung von temperatursensitiven Dünnschichten und Untersuchungen zu deren Einsatz in Spritzgießwerkzeugen der Thermoplastverarbeitung. 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22395
T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2014 | Newspaper Article | LibreCat-ID: 27328
E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” Welding in the World, vol. 58, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27330
E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27331
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27332
V. Schöppner and S. Littek, “Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27333
E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27334
V. Schöppner and F. Reinders, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the Biobased materials 2014 - 10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27335
E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27336
E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” Joining Plastics, vol. 8, no. 3, pp. 178–182, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27337
V. Schöppner, T. Herken, F. Reinders, and K. Westhues, “Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation - Auslegung,” presented at the Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27338
V. Schöppner, N. Fecke, and T. Herken, “Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27339
E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27340
E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat