Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2022 | Conference Paper | LibreCat-ID: 34738
Schöppner, Volker, et al. Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
Schöppner, Volker, and Florian Brüning. Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
Schöppner, Volker, and Jonas Köllermeier. Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
Schöppner, Volker, and Maximilian Frank. Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
Schöppner, Volker, et al. Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder. 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
Schöppner, Volker, et al. “Weiterentwicklung Eines Verfahrens Zur Korrektur von Wandgleiteffekten Im Rahmen Rheologischer Messungen an Gefüllten Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34741
Moritzer, Elmar, et al. Rückführung Zerkleinerter Organobleche. 2022.
LibreCat
2022 | Report | LibreCat-ID: 34746
Hopp, Matthias, and Lisa Tölle. Teilchen-Kunde - Stäube Beim Mechanischen Recycling Faserverstärkter Thermoplaste. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34751
Schall, Christoph Wilhelm Theodor. Vorteilhaftes Prozessverhalten von Wave-Schnecken. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34725
Moritzer, Elmar, and Christian Held. Characterization of Additively Manufactured Plastic Components for Direct Screwing. 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33291
Moritzer, Elmar, and Dennis Rauen. “Plasmaaktivierung Fehlgeschlagen!” Kunststoffe, 2022, pp. 79–81.
LibreCat
2022 | Report | LibreCat-ID: 33070
Fuhrmann, Anika, et al. Verbessertes Füllverhalten Im Spritzgießprozess Durch Schäumen von WPC: Bewertung Des Fließverhaltens Treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33288
Moritzer, Elmar, and Franziska Isabelle Bürenhaus. “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process.” 37th International Conference of the Polymer Processing Society (PPS), 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33286
Hopp, Matthias, et al. “Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity.” Journal of Material Science and Chemical Engineering, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33290
Moritzer, Elmar, et al. “Multimaterial Injection Moulding of Thermosets and Elastomers.” ScienceBG, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33292
Moritzer, Elmar, et al. “Spritzgießen Hochtemperaturbeständiger Baugruppen Aus Duromeren Und Elastomeren.” Kunststoffland NRW, 2022, pp. 34–35.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33296
Moritzer, Elmar, et al. Messtechnische Ermittlung Der Strukurintensität Bei Spritzgegossenen, Faserverstärkten Kunststoffen. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33859
Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.” Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100390.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33861
Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.” Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100389.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33988
Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.” Macromolecular Symposia, vol. 404, no. 1, 2100396, Wiley, 2022, doi:10.1002/masy.202100396.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 33987
Moritzer, Elmar, and Christian Lennart Elsner. “Mit Gestaltungsrichtlinien zum Erfolg.” Kunststoffe, vol. 11/2022, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34744
Hopp, Matthias, and Leon Schäffer. Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33287
Moritzer, Elmar, et al. “Dimensionierung Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022, pp. 84–90.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33289
Moritzer, Elmar, et al. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022, pp. 30–33.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34728
Moritzer, Elmar, et al. “Die Vielseitigkeit von Beschichtungen Im Spritzgießwerkzeug- Und Formenbau.” Zeitschrift Kunststofftechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33862
Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.” Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
Schöppner, Volker, et al. Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
Schöppner, Volker, and Jonas Köllermeier. Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
Schöppner, Volker, and Jonas Köllermeier. Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37635
Dörner, Marius. Wave-Schnecken in Der Einschneckenextrusion. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37639
Helmlinger, Lars René. Untersuchungen Zur Werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen Und Entwicklung Eines Neuen Aufbereitungsverfahrens. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37638
Mühlhoff, Frederik Marvin. Ein Beitrag Zur InMould-Plasma Technologie Zur Oberflächenvorbehandlung Im Mehrkomponentenspritzgießwerkzeug. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37637
Bialaschik, Max Oliver. Ein Beitrag Zum Warmgasstumpfschweißen von Kunststoffen. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37636
Malatyali, Hatice. Modellierung Der Carbonfaserlängenverkürzung. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33856 | 
Moritzer, Elmar, et al. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.” Journal of Composites Science, vol. 6, no. 10, 321, MDPI AG, 2022, doi:10.3390/jcs6100321.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29948
Brüning, Florian, and Volker Schöppner. “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders.” Polymers 14, 2022, doi:https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
Schöppner, Volker, et al. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022, p. 14.
LibreCat
2022 | Journal Article | LibreCat-ID: 34739
Moritzer, Elmar, et al. “Material-Specific Prediction of the Optimal Joinig Parameters for the Screw Blind Rivet Joining Process.” Welding in the World, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 48360
Hopp, Matthias, and Lisa Tölle. “EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS.” Proceedings of the 20th European Conference on Composite Materials, no. Vol. 6, 2022, pp. 119–25.
LibreCat
2022 | Conference Paper | LibreCat-ID: 48354
Moritzer, Elmar, and Julian Wächter. Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process. 2022.
LibreCat
2022 | Book | LibreCat-ID: 48353
Gevers, Karina, et al. Bewertung von IR-Schweißverbindungen an Kurzfaserverstärkten Thermoplasten Mittels Digitaler Bildkorrelation. 2022, pp. 169–75.
LibreCat
2022 | Book | LibreCat-ID: 48356
Schöppner, Volker, and Sascha Vogtschmidt. Schweißnahtkennwerte Für Die Lebensdaueroptimierte Bauteilauslegung von Hochtemperaturbeständigen Thermoplasten. 2022, pp. 534–40.
LibreCat
2022 | Book | LibreCat-ID: 48358
Schöppner, Volker, et al. On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
Rüppel, Annette, et al. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers, vol. 14, no. 15, 3113, MDPI AG, 2022, doi:10.3390/polym14153113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33852 |
Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.” Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 2011–18, doi:10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 44302
Moritzer, Elmar, et al. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.” Journal of Composites Science , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.” Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 1844–58, doi:10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25518
Stüker, Daniel, and Volker Schöppner. Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25519
Stüker, Daniel, and Volker Schöppner. Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders. 2021.
LibreCat