Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

599 Publications


2022 | Conference Paper | LibreCat-ID: 34738
V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34735
V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34734
V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34737
V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34740
V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 34752
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022.
LibreCat
 

2022 | Report | LibreCat-ID: 34741
E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022.
LibreCat
 

2022 | Report | LibreCat-ID: 34746
M. Hopp and L. Tölle, Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste. 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34751
C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken,” presented at the 18. Duisburger Extrusionstagung, Duisburg, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34725
E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 33291
E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022.
LibreCat
 

2022 | Report | LibreCat-ID: 33070
A. Fuhrmann et al., Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 33288
E. Moritzer and F. I. Bürenhaus, “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 33286
M. Hopp et al., “Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity,” Journal of Material Science and Chemical Engineering, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 33290
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Multimaterial Injection Moulding of Thermosets and Elastomers,” presented at the ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 33292
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren,” Kunststoffland NRW, pp. 34–35, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 33296
E. Moritzer, D. Netzband, and A. Ujma, “Messtechnische Ermittlung der Strukurintensität bei spritzgegossenen, faserverstärkten Kunststoffen,” 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 33988
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100396, 2022, doi: 10.1002/masy.202100396.
LibreCat | DOI
 

2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34744
M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 33287
E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 33289
E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
LibreCat
 

2022 | Newspaper Article | LibreCat-ID: 34728
E. Moritzer, D. Rauen, C. Schilp, and M. Scholle, “Die Vielseitigkeit von Beschichtungen im Spritzgießwerkzeug- und Formenbau,” Zeitschrift Kunststofftechnik, 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 34727
V. Schöppner, J. Köllermeier, G. Hiesgen, and J. Trippe, “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” presented at the 2nd International Symposium on Plastics Technology, Aachen, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34720
V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 34726
V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat
 

2022 | Dissertation | LibreCat-ID: 37635
M. Dörner, Wave-Schnecken in der Einschneckenextrusion. 2022.
LibreCat
 

2022 | Dissertation | LibreCat-ID: 37639
L. R. Helmlinger, Untersuchungen zur werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen und Entwicklung eines neuen Aufbereitungsverfahrens. 2022.
LibreCat
 

2022 | Dissertation | LibreCat-ID: 37638
F. M. Mühlhoff, Ein Beitrag zur InMould-Plasma Technologie zur Oberflächenvorbehandlung im Mehrkomponentenspritzgießwerkzeug. 2022.
LibreCat
 

2022 | Dissertation | LibreCat-ID: 37637
M. O. Bialaschik, Ein Beitrag zum Warmgasstumpfschweißen von Kunststoffen. 2022.
LibreCat
 

2022 | Dissertation | LibreCat-ID: 37636
H. Malatyali, Modellierung der Carbonfaserlängenverkürzung. 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 33856 | OA
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science, vol. 6, no. 10, Art. no. 321, 2022, doi: 10.3390/jcs6100321.
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 29948
F. Brüning and V. Schöppner, “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders,” Polymers 14, 2022, doi: https://doi.org/10.3390/polym14020256.
LibreCat | DOI
 

2022 | Journal Article | LibreCat-ID: 34708
V. Schöppner, K. Gevers, A. Tornede, M. Wever, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, p. 14, 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 34739
E. Moritzer, C. Held, and J. Hillemeyer, “Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process,” Welding in the World, 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 48360
M. Hopp and L. Tölle, “EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS,” Proceedings of the 20th European Conference on Composite Materials, no. Vol. 6, pp. 119–125, 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
 

2022 | Book | LibreCat-ID: 48353
K. Gevers, L. Schraa, K. Uhlig, P. Töws, and M. Stommel, Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation, vol. Tagung Werkstoffprüfung 2022-Werkstoffe und Bauteile auf dem Prüfstand. 2022, pp. 169–175.
LibreCat
 

2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
 

2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
 

2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat | DOI
 

2022 | Conference Paper | LibreCat-ID: 33852 | OA
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat | DOI | Download (ext.)
 

2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
 

2022 | Conference Paper | LibreCat-ID: 33853 | OA
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat | DOI | Download (ext.)
 

2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat | Download (ext.)
 

2021 | Conference Paper | LibreCat-ID: 25518
D. Stüker and V. Schöppner, “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
 

2021 | Conference Paper | LibreCat-ID: 25519
D. Stüker and V. Schöppner, “Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
 

Filters and Search Terms

department=367

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed